固定化微藻流化床反应器去除低碳污水中氨氮的潜力

以固定化微藻颗粒为原料,通过搭建流化床反应器强化微藻对氨氮（NH₄⁺-N）的去除,设计了藻种、污水上升流速、光周期和光照强度四组单一变量实验,系统地研究了不同条件下微藻去除NH₄⁺-N的能力.结果表明,当以固定化斜生栅藻为原料、污水上升流速为6.8m/h、光周期为8：16h和光照强度为4800Lux时,NH₄⁺-N去除效果最优（96.7%）.在最优操作条件下,探究了COD为200mg/L时微藻去除NH₄⁺-N的潜力,结果表明,当NH₄⁺-N初始浓度不高于50mg/L时,NH₄⁺-N去除率高于95%.本实验建立了一套半连续微藻流化床实验方法,该方法显著减弱了微藻在生物同化过程中对有机碳源的依赖性,为低COD条件下微藻生物脱氮工艺的设计提供了技术参考和理论基础.     

近14年西北地区甲醛柱浓度的时空变化研究

基于臭氧监测仪（OMI）卫星反演数据,对2005~2018年西北4省区域大气甲醛柱浓度数据进行提取及分析,探讨其时空变化特征及影响因素.结果表明：在时间变化上,14a甲醛柱浓度整体呈先上升后下降的波动变化趋势,夏秋季显著高于冬春季,且冬季均值略高于春季.在空间分布上,甲醛柱浓度自西向东、自北向南逐渐升高,高值区集中于陕西和甘肃东南部及青海西南部;低值区集中于宁夏、青海和甘肃的西北部;稳定性呈现出东部分散、西部集聚、差异显著的分布格局.影响甲醛柱浓度变化的因素包括自然和人为因素,自然因素中,甲醛柱浓度受地形影响显著,与风向、气温均呈现显著正相关;人为因素中,甲醛柱浓度与人口密度、地区生产总值、工业废气排放量及建筑房屋竣工面积均表现出正相关关系,与工业废气排放量的相关度最高.大气中甲醛分子与气溶胶粒子二者间呈显著正相关关系,这进一步说明甲醛浓度受到了诸多因素的综合影响,但气溶胶粒子、气温及工业废气的排放是主导因素.     

黄土高原人工刺槐林土壤团聚体中不同活性有机碳从南到北的变化特征

不同粒径团聚体中的不同活性有机碳对人工林土壤质量改善及碳库动态平衡有重要的作用.本研究在黄土高原地区,从南向北沿着降雨和温度降低梯度选择淳化、安塞、绥德和神木共4个地区,比较研究了人工刺槐林土壤团聚体不同的活性有机碳含量变化及其影响因素.通过湿筛法将土壤团聚体分级为粉黏粒（<0.053 mm）、微团聚体（0.25~0.053 mm）和大团聚体（>0.25 mm）,用Leffory法测定3种粒径土壤团聚体低、中、高活性有机碳含量.结果表明：①4个样区大团聚体（>0.25 mm）含量由南至北呈先降低后增加趋势,微团聚体（0.25~0.053 mm）含量逐渐增加,粉黏粒（<0.053 mm）含量则先增后减.②4个样区中土壤团聚体3种活性有机碳含量大小顺序为低活性 > 中活性 > 高活性,其中,粉黏粒（<0.053 mm）低活性有机碳含量为1.02~1.52 g·kg^-1,中活性有机碳含量为0.53~0.91 g·kg^-1,高活性有机碳含量为0.28~0.43 g·kg^-1;而微团聚体（0.25~0.053 mm）低活性有机碳含量为1.02~2.02 g·kg^-1,中活性有机碳含量为0.46~1.20 g·kg^-1,高活性有机碳含量为0.31~0.85 g·kg^-1;大团聚体（>0.25 mm）低活性有机碳含量为1.08~3.07 g·kg^-1,中活性有机碳含量为0.70~1.96 g·kg^-1,高活性有机碳含量为0.48~1.24 g·kg^-1.③黄土高原人工刺槐林3种粒径团聚体的低、中、高活性有机碳含量主要与年均气温（MAT）、年均降雨量（MAP）、土壤SOC、TN和含水率显著相关（p<0.05）,且在同一活性下,活性有机碳含量与MAT、MAP、土壤TN、SOC、含水率的相关性随着土壤团聚体粒径的增大而越显著.研究结果对理解黄土高原土壤团聚体活性有机碳含量在空间尺度上的变化特征和影响因素具有重要意义.     

Ca(OH)2解吸并固定混合吸收液中CO2的实验研究

CO₂化学吸收法分离纯度高,技术成熟,但能耗过高及成本是困扰该技术发展的瓶颈.在常压条件下对利用Ca（OH）₂直接矿物碳酸化固定MDEA/PZ混合吸收富液中CO₂进行了一系列实验研究,考察了吸收液负荷、Ca（OH）₂投加量、pH、温度及搅拌速率等因素对解吸率的影响,并利用动态吸收-解吸循环实验研究了其CO₂吸收性能和循环使用稳定性,最后对碳酸化反应产物进行了XRD、TEM分析.结果表明,在常压条件下,Ca（OH）₂可以通过液相直接矿物碳酸化对CO₂进行直接固定,并实现吸收富液的再生;随着负荷的升高及Ca（OH）₂投加量、pH、搅拌速率的增大,解吸率随之增加;随着溶液温度升高,解吸率下降;经过5次动态吸收-解吸循环实验后CO₂吸收量可以达到并保持在0.57 mol·L^-1,显示出了良好的循环稳定性.     

东南亚生物质燃烧输送影响我国西南气溶胶辐射特性研究

利用2013年地基CE-318太阳光度计观测数据,结合中分辨率成像光谱仪（MODIS）遥感产品和HYSPLIT后向轨迹分析,研究了一次东南亚生物质燃烧污染长距离输送至中国西南昆明站点过程（2013年4月5~8日）中,气溶胶光学特性和辐射特性的变化及其可能来源.结果表明,此次污染过程期间,我国西南地区生物质燃烧活动较少,而中南半岛地区生物质燃烧活动显著.4月5~7日,昆明站点气溶胶光学厚度（AOD）升高,消光波长指数（EAE）和吸收波长指数（AAE）均增大.此外,依据EAE和AAE分类方法,5~6日昆明站点以城市工业气溶胶为主,7~8日以生物质燃烧气溶胶为主,其细模态峰值半径（0.11μm）小于5~6日（0.15μm）,7日细模态粒子体积浓度峰值（约为0.16μm³/μm²）是5日的2倍.气溶胶直接辐射强迫（ARF）日变化结果表明4月7日气溶胶对地表的降温效应达到最大,对大气的加热作用最强.气溶胶直接辐射强迫效率值（ARFE）的变化表明生物质燃烧气溶胶对大气顶的降温作用减弱.MODIS遥感以及HYSPLIT模式后向轨迹表明,此次昆明站点生物质燃烧气溶胶主要来源于东南亚地区（主要是印度北部、印缅北部和不丹地区）.     

北方湖库沉积物重金属区域特征及生态风险评价

以白洋淀、衡水湖、于桥水库、松花湖、大伙房水库和小兴凯湖沉积作为研究对象,通过对北方六湖库沉积物中Cu、Zn、Pb、Cr、Ni等重金属元素进行分析,并与国内外其他水域重金属污染情况进行多因素比较,探讨了六湖库主要重金属污染源的差异性,区域分布特征以及与国内外其他水域污染的相似性和区别.结果表明,六湖库沉积物重金属污染处于中等偏下水平.六湖库之间主要重金属污染源存在差别.沉积物重金属含量未出现明显上升的趋势.其中Zn、Pb存在富集现象,但Pb含量与历史数据相比出现下降,Zn的含量与其他地区相比整体偏高.大伙房水库沉积物重金属污染较重,Cu、Zn、Pb、Cr、Ni含量平均值分别为56.28,142.3,17.44,97.9,44.44mg/kg.小兴凯湖沉积物重金属含量最低,Cu、Zn、Pb、Cr、Ni含量平均值分别为2.41,63.90,13.37,56.36,26.09mg/kg.六湖库综合风险评价结果为大伙房水库>于桥水库>白洋淀>衡水湖>松花湖>小兴凯湖,重金属整体潜在生态风险指数为低.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

餐厨垃圾生物有机肥对贫瘠黄褐土改良的研究

为了阐明餐厨垃圾生物有机肥改良贫瘠土壤的作用机制,以贫瘠黄褐土为研究对象,通过不施肥、长期（>5 a）施用化肥、中长期（5 a）施用少量餐厨垃圾生物有机肥和短期（1 a）施用大量餐厨垃圾生物有机肥4种施肥方式,分别记为CK组、CF组、LOF-5组和MOF-1组,对比分析不同施肥方式对土壤OM（有机质）、活性有机碳、营养元素和团聚体等的影响.结果表明:①施用餐厨垃圾生物有机肥可显著提高土壤OM、活性有机碳含量,其中,MOF-1组提高效果最显著,与CK组相比,w（OM）可提高173.29%,w（ROC）（ROC为易氧化有机碳）增加了39.17%,w（POC）（POC为颗粒有机碳）和w（DOC）（DOC为可溶性有机碳）分别是CK组的13.85和10.32倍.②中长期（5 a）施用少量餐厨垃圾生物有机肥可增加土壤中较大粒径团聚体的占比,且更有利于提高土壤团粒结构的稳定性,LOF-5组>2 mm粒级的团聚体占比是CK组的4.68倍;与CK组相比,LOF-5组MWD（平均重量直径）增加了100.00%,GMD（几何平均直径）增加了82.98%,>0.25 mm水稳定性团聚体质量占比（DR_0.25）增加了27.20%.③中长期（5 a）施用少量餐厨垃圾生物有机肥可增加土壤中w（TN）（TN为全氮）和w（AN）（AN为速效氮）,与CK组相比,LOF-5组w（TN）和w（AN）分别增加了77.42%和20.82%.施用餐厨垃圾有机肥也可同时增加土壤中w（AP）（AP为速效磷）和w（AK）（AK为速效钾）,MOF-1组增加效果较佳,w（AP）和w（AK）分别是CK组的9.43和3.39倍.研究显示,中长期（5 a）施用少量餐厨垃圾生物有机肥可提升土壤固碳能力,提高土壤养分利用的有效性,从而提升耕地土壤质量,减少化肥施用量,是我国贫瘠黄褐土改良的有效施肥模式.