Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.     

Experimental study on the influence mechanism of gas seepage on coal and gas outburst disaster

By using the self-developed triaxial servo-controlled seepage equipment for thermo-fluid-solid coupling of coal containing gas and the self-developed coal and gas outburst simulation test device, experiments to study the influence mechanism of gas seepage on coal and gas outburst disasters. The results show that: (i) gas seepage decreases the strength of coal containing gas and accelerates its failure process; (ii) under the same gas pressure, the confining pressure is larger, the more difficult the gas flows and the greater the intensity of coal containing gas is; (iii) in the process of coal and gas outburst, the greater the vertical ground stress is, the more powerful the outburst will be; (iv) the influence mechanism of gas seepage on coal and gas outburst disasters is as follows: firstly, gas seepage weakens the mechanical properties of coal body, which makes it much easier for coal and gas outburst to occur; secondly, on the same effect of external force, it will be easy to form a high gas pressure zone in the coal body under the difficult condition of gas seepage, and accumulate more gas compression energy, which is the energy source for coal and gas outburst, and it is also the main dynamic source to throw and grind the coal.     

Experimental research into effects of obstacle on methane-coal dust hybrid explosion

An experimental system including pressure transducer, data acquisition card, computer and electric spark ignition device was set up to research methane-coal dust hybrid explosions in closed tubes with different types of obstacles inside. Its dynamic response time was less than a millisecond and the test precision was 0.1%. The experimental results show that the obstacles had great effects on the explosion characteristics in the tube. Hollow obstacles linked with inner wall of the tube induced faster pressure rising than installed center blocked solid obstacles. Obstacles with more sharp corner induce more violent explosions. The most dangerous explosion occurred when spacing between obstacles almost equaled the inner diameter of the tube for the same size obstacle.     

基于电荷监测技术预测矿山动力灾害试验研究

为提高矿山动力灾害预测准确率,应用自主研制的电荷传感器,将标准煤样置于三轴压力室内进行应力-电荷试验。分析围压对煤样压缩破坏过程中电荷信号的影响。结合现场测试,揭示工作面开挖过程中煤体应力与煤壁表面感应电荷的时间和空间变化规律。试验结果表明,煤体压缩过程中电荷信号的变化与煤体所处的应力水平关系密切,处于应力集中区域和应力松弛区域的煤体有明显脉冲状电荷信号,原始应力区电荷信号平稳,电荷信号的变化超前于煤体应力的变化,围压对电荷信号有延缓、强化的作用。     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.     

Sources of underground CO: Crushing and ambient temperature oxidation of coal

As a harmful gas in underground coal mine, CO seriously threatened the safety of miners. Currently, the spontaneous combustion of residual coal in goaf is generally considered as the main source of underground CO. CO gas is also widely used as an indicator gas in fire prediction in mines. However, high concentrations of CO are also detected in some mines without spontaneous combustion of coal. Therefore, in the paper, with four ranks of coal, we studied other two potential CO sources: crushing and oxidation at ambient temperature. The more completely crushed coal produces more CO. The concentration of generated CO is inversely proportional to moisture content in coal. Therefore, the addition of water can inhibit the generation process of CO during the crushing process of coal. Lignite with low metamorphic grade can be oxidized to produce CO at ambient temperature (25 °C), and anthracite with high coal rank can be only oxidized to produce CO at 60 °C. Infrared spectra indicated that the coal with rich aliphatic hydrocarbons and oxygen-containing functional groups are more susceptible to oxidation at room temperature. Moreover, the smaller particle size of coal is more beneficial to the oxidation at ambient temperature to generate CO. CO generation during coal oxidation is also closely related to the ventilation rate.     

矿井瓦斯控爆技术及材料研究进展

瓦斯爆炸灾害防治一直是我国煤矿安全研究的热点、难点。通过对国内外相关文献总结分析,从瓦斯抑爆装置、抑爆介质及抑爆机理3个方面综述了目前国内外矿井瓦斯抑爆技术及抑爆材料的研究现状,提出了未来的发展方向。研究结果表明:瓦斯抑爆技术的有效性和可靠性主要取决于抑爆介质的物理化学性质、控爆空间几何参数、爆炸特性参数和抑爆系统中爆炸探测方式等因素;结合瓦斯爆炸链式反应理论和探测技术的发展,研究应更多地关注抑爆过程的微观特性,揭示其详细的抑爆作用机理,为探寻新型高效、绿色抑爆材料提供更有力的理论支持。     

急倾斜上保护层开采保护效果的参数敏感度研究

为对急倾斜上保护层开采过程中,保护层开采多参数同时变化时的保护效果变化规律进行量化研究,将被保护层膨胀变形曲线的形态参数作为保护效果考察指标,基于可旋转CCD试验方案进行有限元计算,建立了保护层开采保护效果的响应面模型,得到了不同保护效果指标受多个保护层开采参数变异影响的敏感度。通过对急倾斜上保护层开采实例进行敏感度分析得到:范围相关保护效果指标受保护层开采参数变异影响的敏感度最高,位置相关保护效果指标敏感度次之,卸压程度相关保护效果指标敏感度最小。范围相关保护效果指标中,上部卸压角受侧压系数变异影响最敏感,敏感度为1.70;下部卸压角受层间距变异影响最敏感,敏感度为1.02;倾向保护范围长度受层间距变异影响最敏感,敏感度为-1.89。     

非对称开采条件下工作面“多向应力”变化特征研究

在非对称开采条件下,工作面受上覆岩层自重应力、超前支承应力、采空区侧向支承应力和回风巷煤柱应力等“多向应力”叠加影响,使得工作面应力呈“非对称”性。为研究非对称开采条件下工作面“多向应力”变化特征,基于微震监测、应力在线监测和理论计算,对母杜柴登煤矿30202工作面回采过程中所形成的非对称开采条件下的应力变化进行分析;并基于工作面所受应力条件和围岩体结构条件,分析了“多向应力”叠加显现机理。结果表明:30202工作面回采期间,煤柱支承应力沿走向分为应力升高区、应力明显降低区、应力缓慢降低区和应力稳定区,其应力峰值主要集中在工作面前方40 m左右,应力集中系数平均为1.61;在非对称开采阶段,在走向方向工作面超前支承应力影响范围较回采初期增加了100 m左右;在不考虑垂直应力影响的情况下,相邻工作面采空区的侧向应力对30202工作面倾向方向的影响范围为44 m,应力最大值为56.1 MPa。在“多向应力”耦合作用下工作面在回采过程中产生能量集聚,并在采动扰动下发生能量释放,满足了大能量事件发生的基本应力条件;同时在扰动条件下采空区发生高位顶板错动,以及围岩支护薄弱为大能量事件的发生提供了围岩结构条件。研究结果可为工作面非对称开采条件下采场矿压显现规律研究、顶板控制和巷道支护设计提供指导。     

Studying crop sequences with CarrotAge,a HMM-based data mining software

We have developed a knowledge discovery system based on high-order hidden Markov models for analyzing spatio-temporal data bases. This system, named CarrotAge , takes as input an array of discrete data – the rows represent the spatial sites and the columns the time slots – and builds a partition together with its a posteriori probability. CarrotAge has been developed for studying the cropping patterns of a territory. It uses therefore an agricultural drench database, named Ter-Uti , which records every year the land-use category of a set of sites regularly spaced. The results of CarrotAge are interpreted by agronomists and used in research works linking agricultural land use and water management. Moreover, CarrotAge can be used to find out and study crop sequences in large territories, that is a main question for agricultural and environmental research, as discussed in this paper.