Influence of urban morphological parameters on the distribution and diffusion of air pollutants: A case study in China

Air pollution has a serious fallout on human health, and the influences of the different urban morphological characteristics on air pollutants cannot be ignored. In this study, the relationship between urban morphology and air quality (wind speed, CO, and PM_2.5) in residential neighborhoods at the meso-microscale was investigated. The changes in the microclimate and pollutant diffusion distribution in the neighborhood under diverse weather conditions were simulated by Computational Fluid Dynamics (CFD). This study identified five key urban morphological parameters (Building Density, Average Building Height, Standard Deviation of Building Height, Mean Building Volume, and Degree of Enclosure) which significantly impacted the diffusion and distribution of pollutants in the neighborhood. The findings of this study suggested that three specific strategies (e.g. volume of a single building should be reduced, DE should be increased) and one comprehensive strategy (the width and height of the single building should be reduced while the number of single buildings should be increased) could be illustrated as an optimized approach of urban planning to relief the air pollution. The result of the combined effects could provide a reference for mitigating air pollution in sustainable urban environments.     

Programmed cell death induced by modified clay in controlling Prorocentrum donghaiense bloom

Modified clay (MC), an effective material used for the emergency elimination of algal blooms, can rapidly reduce the biomass of harmful algal blooms (HABs) via flocculation. After that, MC can still control bloom population through indirect effects such as oxidative stress, which was initially proposed to be related to programmed cell death (PCD) at molecular level. To further study the MC induced cell death in residual bloom organisms, especially identifying PCD process, we studied the physiological state of the residual Prorocentrum donghaiense. The experimental results showed that flocculation changed the physiological state of the residual cells, as evidenced by growth inhibition and increased reactive oxygen species production. Moreover, this research provides biochemical and ultrastructural evidence showing that MC induces PCD in P. donghaiense. Nuclear changes were observed, and increased caspase-like activity, externalization of phosphatidylserine and DNA fragmentation were detected in MC-treated groups and quantified. And the mitochondrial apoptosis pathway was activated in both MC-treated groups. Besides, the features of MC-induced PCD in a unicellular organism were summarized and its concentration dependent manner was proved. All our preliminary results elucidate the mechanism through which MC can further control HABs by inducing PCD and suggest a promising application of PCD in bloom control.     

Preparation and characterization of boron-doped corn straw biochar: Fe (Ⅱ) removal equilibrium and kinetics

Nowadays, iron ions as a ubiquitous heavy metal pollutant are gradually concerned and the convenient and quick removal of excessive iron ions in groundwater has become a major challenge for the safety of drinking water. In this study, boron-doped biochar (B-BC) was successfully prepared at various preparation conditions with the addition of boric acid. The as-prepared material has a more developed pore structure and a larger specific surface area (up to 897.97 m²/g). A series of characterization results shows that boric acid effectively activates biochar, and boron atoms are successfully doped on biochar. Compared with the ratio of raw materials, the pyrolysis temperature has a greater influence on the amount of boron doping. Based on Langmuir model, the maximum adsorption capacity of 800B-BC_1:2 at 25 °C, 40 °C, 55 °C are 50.02 mg/g, 95.09 mg/g, 132.78 mg/g, respectively. Pseudo-second-order kinetic model can better describe the adsorption process, the adsorption process is mainly chemical adsorption. Chemical complexation, ions exchange, and co-precipitation may be the main mechanisms for Fe²⁺ removal.     

Fine particle-bound PAHs derivatives at mountain background site (Mount Tai) of the North China: Concentration, source diagnosis and health risk assessment

Ten nitrated polycyclic aromatic hydrocarbons (nPAHs) and 4 oxygenated polycyclic aromatic hydrocarbons (oPAHs) in fine particulate matter (PM_2.5) samples from Mount Tai were analyzed during summer (June to August), 2015. During the observation campaign, the mean concentration of total nPAHs and oPAHs was 31.62 pg/m³ and 0.15 ng/m³, respectively. Two of the monitored compounds, namely 9-nitro-anthracene (9N-ANT) (6.86 pg/m³) and 9-fluorenone (9FO) (0.05 ng/m³) were the predominant compounds of nPAHs and oPAHs, respectively. The potential source and long-range transportation of nPAHs and oPAHs were investigated by the positive matrix factorization (PMF) method and the potential source contribution function (PSCF) methods. The results revealed that biomass/coal burning, gasoline vehicle emission, diesel vehicle emission and secondary formation were the dominant sources of nPAHs and oPAHs, which were mainly from Henan province and Beijing-Tianjin-Hebei region and Bohai sea. The incremental life cancer risk (ILCR) values were calculated to evaluate the exposure risk of nPAHs and oPAHs for three group people (infant, children and adult), and the values of ILCR were 7.02 × 10^?10, 3.49 × 10^?9 and 1.41 × 10^?8 for infant, children and adults, respectively. All these values were lower than the standard of EPA (Environmental Protection Agency) (<10^?6), indicating acceptable health risk of nPAHs and oPAHs.     

The concentration and probabilistic risk assessment of potentially toxic elements in fillets of silver pomfret (Pampus argenteus): A global systematic review and meta-analysis

The contamination of fish type products such as silver pomfret fish fillets by potentially toxic elements (PTEs) has raised global health concerns. Related studies regarding the concentration of PTEs in fillets of silver pomfret fish were retrieved among some international databases such as Scopus, PubMed and Embase between 1 January 1983 and 10 March 2020. The pooled (mean) concentration of PTEs in fillets of silver pomfret fish was meta-analyzed with the aid of a random-effect model (REM). Also, the non-carcinogenic risk was estimated via calculating the 95th percentile of the total target hazard quotient (TTHQ). The meta-analysis of 21 articles (containing 25 studies or data reports) indicated that the ranking of PTEs in fillets of silver pomfret fish was Fe (11,414.81 µg/kg wet weight, ww) > Zn (6055.72 µg/kg ww) > Cr (1825.79 µg/kg ww) > Pb (1486.44 µg/kg ww) > Se (1053.47 µg/kg ww) > Cd (992.50 µg/kg ww) > Ni (745.23 µg/kg ww) > Cu (669.71 µg/kg ww) > total As (408.24 µg/kg ww) > Co (87.03 µg/kg ww) > methyl Hg (46.58 µg/kg ww). The rank order of health risk assessment by country based on the TTHQ for adult consumers was Malaysia (2.500) > Bangladesh (0.886) > Iran (0.144) > China (0.045) > Pakistan (0.020) > India (0.015), while the corresponding values for child consumers was Malaysia (11.790) > Bangladesh (4.146) > Iran (0.675) > China (0.206) > Pakistan (0.096) > India (0.077). The adult consumers in Malaysia and children in Malaysia and Bangladesh were at considerable non-carcinogenic risk. Therefore, following the recommended control plans in order to reduce the health risk associated with the ingestion of PTEs via consumption of silver pomfret fish fillets is crucial.     

Electrochemical reduction of Cr(VI) in the presence of sodium alginate and its application in water purification

Chromium (Cr) is used in many manufacturing processes, and its release into natural waters is a major environmental problem today. Low concentrations of Cr(VI) are toxic to human health and living organisms due to the carcinogenic and mutagenic nature of this mineral. This work examined the conversion of Cr(VI) to Cr(III) via electrochemical reduction using gold electrode in an acidic sodium alginate (SA) solution and subsequent removal of the produced Cr(III)-SA by the polymer-enhanced ultrafiltration (PEUF) technique. A solution of SA in nitric acid was used both as an electrolytic medium during the voltammetric measurements and bulk electrolysis and as an extracting agent during the PEUF technique. The electroanalysis of Cr(VI) was performed by linear sweep voltammetry in the presence of acidic SA solution to study its voltammetric behavior as a function of the Cr(VI) concentration, pH, presence of Cr(III), SA concentration and scan rate. In addition, the quantitative reduction of Cr(VI) to Cr(III) was studied through the bulk electrolysis technique.The results showed efficient reduction with well-defined peaks at approximately 0.3 V vs. Ag/AgCl, using a gold working electrode. As the pH increased, the reduction signal strongly decreased until its disappearance. The optimum SA concentration was 10 mmol/L, and it was observed that the presence of Cr(III) did not interfere in the Cr(VI) electroanalysis. Through the quantitative reduction by bulk electrolysis in the presence of acidic SA solution, it was possible to reduce all Cr(VI) to Cr(III) followed by its removal via PEUF.     

Dairy manure as a potential source of crop nutrients and environmental contaminants

Although animal manure is applied to agricultural fields for its nutrient value, it may also contain potential contaminants. To determine the variability in such contaminants as well as in valuable nutrients, nine uncomposted manure samples from Idaho dairies collected during 2.5 years were analyzed for macro- and micro-nutrients, hormones, phytoestrogens, antibiotics, veterinary drugs, antibiotic resistance genes, and genetic elements involved in the spread of antibiotic resistance. Total N ranged from 6.8 to 30.7 (C:N of 10 to 21), P from 2.4 to 9.0, and K from 10.2 to 47.7 g/kg manure. Zn (103 – 348 mg/kg) was more abundant than Cu (56 – 127 mg/kg) in all samples. Phytoestrogens were the most prevalent contaminants detected, with concentrations fluctuating over time, reflecting animal diets. This is the first study to document the presence of flunixin, a non-steroidal anti-inflammatory drug, in solid stacked manure from regular dairy operations. Monensin was the most frequently detected antibiotic. Progesterones and sulfonamides were regularly detected. We also investigated the relative abundance of several types of plasmids involved in the spread of antibiotic resistance in clinical settings. Plasmids belonging to the IncI, IncP, and IncQ1 incompatibility groups were found in almost all manure samples. IncQ1 plasmids, class 1 integrons, and sulfonamide resistance genes were the most widespread and abundant genetic element surveyed, emphasizing their potential role in the spread of antibiotic resistance. The benefits associated with amending agricultural soils with dairy manure must be carefully weighed against the potential negative consequences of any manure contaminants.     

Primary and secondary organic aerosol in an urban/industrial site: Sources, health implications and the role of plastic enriched waste burning

PM10 samples were collected from an urban/industrial site nearby Athens, where uncontrolled burning activities occur. PAHs, monocarboxylic, dicarboxylic, hydroxycarboxylic and aromatic acids, tracers from BVOC oxidation, biomass burning tracers and bisphenol A were determined. PAH, monocarboxylic acids, biomass burning tracers and bisphenol A were increased during autumn/winter, while BSOA tracers, dicarboxylic- and hydroxycarboxylic acids during summer. Regarding aromatic acids, different sources and formation mechanisms were indicated as benzoic, phthalic and trimellitic acids were peaked during summer whereas p-toluic, isophthalic and terephthalic were more abundant during autumn/winter. The Benzo[a]pyrene-equivalent carcinogenic power, carcinogenic and mutagenic activities were calculated showing significant (p < 0.05) increases during the colder months. Palmitic, succinic and malic acids were the most abundant monocarboxylic, dicarboxylic and hydrocarboxylic acids during the entire sampling period. Isoprene oxidation was the most significant contributor to BSOA as the isoprene-SOA compounds were two times more abundant than the pinene-SOA (13.4 ± 12.3 and 6.1 ± 2.9 ng/m³, respectively). Ozone has significant impact on the formation of many studied compounds showing significant correlations with: isoprene-SOA (r = 0.77), hydrocarboxylic acids (r = 0.69), pinene-SOA (r = 0.63),dicarboxylic acids (r = 0.58), and the sum of phthalic, benzoic and trimellitic acids (r = 0.44). PCA demonstrated five factors that could explain sources including plastic enriched waste burning (30.8%), oxidation of unsaturated fatty acids (23.0%), vehicle missions and cooking (9.2%), biomass burning (7.7%) and oxidation of VOCs (5.8%). The results highlight the significant contribution of plastic waste uncontrolled burning to the overall air quality degradation.     

Enhanced the photoelectrochemical performance of Bi2XO6 (X = W, Mo) for detecting hexavalent chromium by modification of CuS

In this work, Bi₂XO₆ (X = W, Mo) are synthesized at different temperatures. The results of tests find the optimal temperatures of Bi₂WO₆ and Bi₂MoO₆ are 180 and 160°C (BW-180, BM-160). Then, BW-180 and BM-160 are further compounded with different contents of CuS. The results of photoelectrochemical (PEC) tests show that CuS can improve the PEC performance of semiconductor materials, and it has better performance when CuS mass fraction is 5%. These maybe the photoelectron potentials generated by CuS/Bi₂XO₆ (X = Mo, W) heterojunction reduce the combination of photogenerated electrons and holes. When the PEC sensor based on 5%-CuS/BW-180 detects Cr(VI), it has a linear range of 1–80 μmol/L with detection limit of 0.95 μmol/L, while the PEC sensor based on 5%-CuS/BM-160 detects Cr(VI) has a linear range of 0.5–230 μmol/L and a detection limit of 0.12 μmol/L. Thus, 5%-CuS/Bi₂XO₆ has potential application in hexavalent chromium detection.     

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.