The physiological response and iron and potassium contents in the hairy roots of Brassica rape L. Under cadmium stress北大核心CSCD

The experiments were conducted to investigate the tolerance and enrichment capabilities by elucidating the physiological response and cadmium impact on iron and potassium accumulation amounts of brassica rape hairy roots under different cadmium concentrations by using liquid suspension culture method. The results showed the following. (1) The growth of hairy roots was not significantly different under low cadmium concentrations (below 100 μmol/L), whereas it was obviously inhibited under high cadmium concentrations (more than 100 μmol/L). Further, the maximum fresh weight of brassica rape hairy roots reached 4.34 g under 25 μmol/L cadmium stress after 7 days. (2) The content of ROS in brassica rape hairy roots increased with increasing concentrations of cadmium; the antioxidant enzyme activities of brassica rape hairy roots (SOD, POD, and CAT) decreased first and then increased with increasing cadmium concentrations under 1-day stress, whereas showed an opposite trend under 7-day stress. (3) PI staining and MDA content indicated that cellular damage was more serious with increasing cadmium concentrations. (4) With the increase of cadmium concentrations, cadmium content of hairy roots increased and reached maximum of 2.97 mg/g under 400 μmol/L cadmium stress after 7 days. The iron content also increased significantly with the maximal weight of 14.52 mg/g after 1-day cadmium stress, whereas no significant difference was noted under 7-day cadmium stress. The potassium content under 7-day cadmium stress was 1.6 times of that after 1-day stress (15.73 mg/g). The study showed that the physiological response of Brassica rape hairy roots was correlated with the concentration and time of cadmium stress. Moreover, cadmium stress caused metabolic disorders of iron and potassium in the hairy roots, but the hairy roots of Brassica rape had better enrichment effect on cadmium. © 2018 Science Press. All rights reserved.     

Fe2O3-CeO2-Bi2O3/γ-Al2O3 catalyst in the catalytic wet air oxidation (CWAO) of cationic red GTL under mild reaction conditions

Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃, an environmental friendly material, was investigated. The catalyst exhibited good catalytic performance in the CWAO of cationic red GTL. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. HO₂· and O₂·⁻ appeared as the main reactive species in the reaction. The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst, a novel environmental-friendly material, was used to investigate the catalytic wet air oxidation (CWAO) of cationic red GTL under mild operating conditions in a batch reactor. The catalyst was prepared by wet impregnation, and characterized by special surface area (BET measurement), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst exhibited good catalytic activity and stability in the CWAO under atmosphere pressure. The effect of the reaction conditions (catalyst loading, degradation temperature, solution concentration and initial solution pH value) was studied. The result showed that the decolorization efficiency of cationic red GTL was improved with increasing the initial solution pH value and the degradation temperature. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. Hydroperoxy radicals (HO₂·) and superoxide radicals (O₂⁻·) appeared as the main reactive species upon the CWAO of cationic red GTL.     

Effects of dissolved oxygen and iron aging on the reduction of trichloronitromethane, trichloracetonitrile, and trichloropropanone

Iron metal (Fe(0)) is a potent reductant capable of reducing a wide variety of halogenated organic compounds including disinfection byproducts (DBPs). These reduction reactions may play a role in DBP fate in iron water mains and potentially could be exploited to remove DBPs from drinking water or wastewater in a packed-bed configuration. Oxidants (i.e., dissolved oxygen (DO) and chlorine) present in the water, however, may decrease the DBP degradation rate by competing for reactive sites and rapidly aging or corroding the iron surface. Thus, batch experiments were performed to investigate the effect of DO on the degradation rates of selected DBPs by Fe(0). Experiments were performed under anaerobic conditions, in initially oxygen saturated buffer without DO control, and under controlled DO (approximately 4.0 or 8.0 mg l⁻¹) conditions. The effect of short-term (25–105 min) iron aging in DO-containing buffer on DBP degradation rate also was investigated in separate experiments. For fresh Fe(0), the degradation rates of trichloronitromethane (TCNM) and trichloroacetonitrile (TCAN) in initially oxygen saturated buffer were similar to their respective rates under anaerobic conditions. The degradation rate of 1,1,1-trichloropropanone (1,1,1-TCP), however, decreased significantly in the presence of DO and the effect was proportional to DO concentration in the controlled DO experiments. For a DO concentration of 4 mg l⁻¹, the degradation rate of the three DBPs was greater for longer aging times as compared to their respective rates after 25 min, suggesting the formation of a mineral phase that increased reactivity. For a DO concentration of 8 mg l⁻¹, the effects of increasing aging time were mixed. TCNM degradation rates were stable for all aging times and comparable to that under anaerobic conditions. The TCAN and 1,1,1-TCP degradation rates, however, tended to decrease with increasing aging time. These results suggest that the reduction of highly reactive DBPs by Fe(0) will not be affected by the presence of DO but that the reaction rates will be slowed by DO for DBPs with slower degradation kinetics.     

零价铁与过硫酸盐异相芬顿降解活性艳橙X-GN

采用零价铁(Fe~0)与过硫酸盐构建异相类芬顿体系,由Fe0腐蚀释放Fe~(2+)催化S_2 O_8~(2-)产生硫酸根自由基快速降解偶氮染料活性艳橙,考察了初始p H值、Fe~0投加量、过硫酸盐投加量和温度对降解过程的影响。结果表明,当活性艳橙初始浓度为100 mg/L、pH值为7、Fe~0投加量为0.5 g/L、过硫酸盐投加量为1 mmol/L和反应温度为30℃时,反应60 min后活性艳橙降解率达到92.6%。酸性条件和提高反应温度均有利反应的进行,而且活性艳橙的降解率在初始pH值为9时也高于90%。反应过程符合准一级动力学,表观反应速率常数k为0.0513 min~(-1)(30℃)。UV-Vis扫描显示,活性艳橙的发色基团在反应过程中被破坏。由Fe~0与S_2O_8~(2-)构成的异相Fenton体系可作为一种高效手段用于染料废水的处理。     

Mercury mass flow in iron and steel production process and its implications for mercury emission control

The iron and steel production process is one of the predominant anthropogenic sources of atmospheric mercury emissions worldwide. In this study, field tests were conducted to study mercury emission characteristics and mass flows at two iron and steel plants in China. It was found that low-sulfur flue gas from sintering machines could contribute up to41% of the total atmospheric mercury emissions, and desulfurization devices could remarkably help reduce the emissions. Coal gas burning accounted for 17%–49% of the total mercury emissions, and therefore the mercury control of coal gas burning, specifically for the power plant burning coal gas to generate electricity, was significantly important. The emissions from limestone and dolomite production and electric furnaces can contribute29.3% and 4.2% of the total mercury emissions from iron and steel production. More attention should be paid to mercury emissions from these two processes. Blast furnace dust accounted for 27%–36% of the total mercury output for the whole iron and steel production process. The recycling of blast furnace dust could greatly increase the atmospheric mercury emissions and should not be conducted. The mercury emission factors for the coke oven,sintering machine and blast furnace were 0.039–0.047 g Hg/ton steel, and for the electric furnace it was 0.021 g Hg/ton steel. The predominant emission species was oxidized mercury, accounting for 59%–73% of total mercury emissions to air.     

铁和铝离子对土壤水溶性氟化物检测的干扰研究

通过离子选择电极法测定Fe3+和Al3+不同含量的土壤样品中水溶性氟化物试验,研究Fe3+和Al3+对测定的干扰与消除方法,证实了在总离子强度调节缓冲溶液共存下,Fe3+和Al3+对土壤提取液中水溶性氟化物检测结果存在不同程度的负干扰。选择6种代表性土壤样品,在水溶性氟化物提取液中加入20 mg/L的Al3+和100 mg/L的Fe3+做干扰试验,比较了分取不同体积土壤提取液对氟化物检测结果的影响,结果表明,对水溶性ρ(Fe3+)和ρ(Al3+)高的土壤样品,可选择减少提取液取样体积来消除干扰。选取的5种标准样品测试结果与标准值相符,干扰消除方法具有良好的适用性。     

A review on sustainable reuse applications of Fenton sludge during wastewater treatment

• The sustainable approaches related to Fenton sludge reuse systems are summarized. • Degradation mechanism of Fenton sludge heterogeneous catalyst is deeply discussed. • The efficient utilization directions of Fenton sludge are proposed. The classical Fenton oxidation process (CFOP) is a versatile and effective application that is generally applied for recalcitrant pollutant removal. However, excess iron sludge production largely restricts its widespread application. Fenton sludge is a hazardous solid waste, which is a complex heterogeneous mixture with Fe(OH)₃, organic matter, heavy metals, microorganisms, sediment impurities, and moisture. Although studies have aimed to utilize specific Fenton sludge resources based on their iron-rich characteristics, few reports have fully reviewed the utilization of Fenton sludge. As such, this review details current sustainable Fenton sludge reuse systems that are applied during wastewater treatment. Specifically, coagulant preparation, the reuse of Fenton sludge as an iron source in the Fenton process and as a synthetic heterogeneous catalyst/adsorbent, as well as the application of the Fenton sludge reuse system as a heterogeneous catalyst for resource utilization. This is the first review article to comprehensively summarize the utilization of Fenton sludge. In addition, this review suggests future research ideas to enhance the cost-effectiveness, environmental sustainability, and large-scale feasibility of Fenton sludge applications.     

Based on material flow analysis: Value chain analysis of China iron resources

Iron is an important basic resource for national economic development in China. It is of great strategic importance for the sustainable development of China's economy to study the utilization and circulation status of iron resources. In this paper, using the material flow and value chain analysis method, we quantitatively analyzed the value flow of iron resources in China. According to the value chain and price theory of element M, a value stream diagram of iron resources corresponding to the substance flow chart was plotted. Based on the previous material flow analysis result of iron resources, the diagram quantitatively depicted the value of the circulating flow of iron resources in China in 2011. The results show that by recycling materials, the value of the circulating flow of iron resources can bring considerable economic benefits to both producers and consumers. In the production stage, the expenditures of the entire economic system was reduced by 91.77 billion RMB by circulating iron and the income increased by 95 billion RMB by recycling home scrap, which was generated in the crude steel production stage. In the use stage of iron and steel products, the recycling of old scrap enabled the entire economic system to recover 370.78 billion RMB. It should be noted that analysis within a single framework of physical and economic characteristics of iron resources in the economic system can further extend the research chain of substance flow and value flow at the macro level, enhancing the economic value of substances flow research. In addition, by tracking and depicting the value flow cycle of elements, the improvement potentials and the value situations can be determined to provide useful information for conducting processing and technological innovation for waste minimization.