危险废物处理处置技术评价方法研究

在对不同危险废物处理处置技术评价方法适用性进行分析的基础上,对危险废物处理处置技术评价方法进行了系统研究.结果发现专家评价法和环境技术评价(EnTA)法以定性评价为主,简单易行,应用范围广泛;生命周期评价(LCA)法以定量为主,但由于数据采集困难,目前在应用上还面临很多困难;层次分析(AHP)法把定性与定量评价融合得比较好,对于解决危险废物处理处置技术的选择问题行之有效.     

Prospects for carbon-neutral housing: the influence of greater wood use on the carbon footprint of a single-family residence

This paper examines the energy and carbon balance of two residential house alternatives; a typical wood frame home using more conventional materials (brick cladding, vinyl windows, asphalt shingles, and fibreglass insulation) and a similar wood frame house that also maximizes wood use throughout (cedar shingles and siding, wood windows, and cellulose insulation) in place of the more typical materials used – a wood-intensive house. Carbon emission and fossil fuel consumption balances were established for the two homes based on the cumulative total of three subsystems: (1) forest harvesting and regeneration; (2) cradle-to-gate product manufacturing, construction, and replacement effects over a 100-year service life; and (3) end-of-life effects – landfilling with methane capture and combustion or recovery of biomass for energy production.The net carbon balance of the wood-intensive house showed a complete offset of the manufacturing emissions by the credit given to the system for forest re-growth. Including landfill methane emissions, the wood-intensive life cycle yielded 20 tons of CO₂e emissions compared to 72 tons for the typical house. The wood-intensive home's life cycle also consumed only 45% of the fossil fuels used in the typical house.Diverting wood materials from the landfill at the end of life improved the life cycle balances of both the typical and wood-intensive houses. The carbon balance of the wood-intensive house was 5.2 tons of CO₂e permanently removed from the atmosphere (a net carbon sink) as compared to 63.4 of total CO₂e emissions for the typical house. Substitution of wood fuel for natural gas and coal in electricity production led to a net energy balance of the wood-intensive house that was nearly neutral, 87.1 GJ energy use, 88% lower than the scenario in which the materials were landfilled.Allocating biomass generation and carbon sequestration in the forest on an economic basis as opposed to a mass basis significantly improves the life cycle balances of both houses. Employing an economic allocation method to the forest leads to 3–5 times greater carbon sequestration and fossil fuel substitution attributable to the house, which is doubled in forestry regimes that remove stumps and slash as fuel. Thus, wood use has the potential to create a significantly negative carbon footprint for a house up to the point of occupancy and even offset a portion of heating and cooling energy use and carbon emissions; the wood-intensive house is energy and carbon neutral for 34–68 years in Ottawa and has the potential to be a net carbon sink and energy producer in a more temperate climate like San Francisco.     

人力资本法在空气污染生命健康损失评估中的应用

采用人力资本法估计生命价值,就人力资本法用于生命价值估计的关键问题开展研究,包括用何种指标代表人力资本、工作年限损失计算、人力资本增长预测、贴现率选择等问题。以人均收入代表人力资本,基于城市不同年龄阶段居民人口数据和基期死亡率数据计算工作年限损失。以北京市为例,计算出因空气污染所致北京市居民平均工作年限损失为11.3 a,2014年北京市城镇居民人均可支配收入为43 910元,带入人力资本模型,人均收入增长率取10%,贴现率取3%,得到对生命价值的估计结果为68.6万元;贴现率取7%,得到对生命价值的估计结果为55.7万元。     

Methodological aspects of life cycle assessment of integrated solid waste management systems

Environmental life cycle assessment (LCA) developed rapidly during the 1990s and has reached a certain level of harmonisation and standardisation. LCA has mainly been developed for analysing material products, but can also be applied to services, e.g. treatment of a particular amount of solid waste. This paper discusses some methodological issues which come into focus when LCAs are applied to solid waste management systems. The following five issues are discussed. (1) Upstream and downstream system boundaries: where is the ‘cradle’ and where is the ‘grave’ in the analysed system? (2) Open-loop recycling allocation: besides taking care of a certain amount of solid waste, many treatment processes also provide additional functions, e.g. energy or materials which are recycled into other products. Two important questions which arise are if an allocation between the different functions should be made (and if so how), or if system boundaries should be expanded to include several functions. (3) Multi-input allocation: in waste treatment processes, different materials and products are usually mixed. In many applications there is a need to allocate environmental interventions from the treatment processes to the different input materials. The question is how this should be done. (4) Time: emissions from landfills will continue for a long time. An important issue to resolve is the length of time emissions from the landfill should be considered. (5) Life cycle impact assessment: are there any aspects of solid waste systems (e.g. the time horizon) that may require specific attention for the impact assessment element of an LCA? Although the discussion centres around LCA it is expected that many of these issues are also relevant for other types of systems analyses.     

Benefits and challenges of streamlined life-cycle assessment for SMEs – findings from case studies on climate change impacts

ABSTRACT

Small and medium-sized enterprises (SMEs) have a substantial role in the economy and job creation, but they are a remarkable source of environmental impacts. SMEs often lack skills and resources to compile environmental impact assessments; Streamlined Life Cycle Analysis (LCA) can provide efficient tools for this. An application of streamlined LCA relying heavily on database data, LCA clinic, was developed and tested on 23 SMEs in Finland. The climate change impacts were mainly caused by the production of raw materials, electricity and heating, whereas packaging and transportation were not influential. A significant amount of emissions were indirect, i.e. caused by production of raw materials. Thus, decreasing emissions from raw material production or selecting raw materials with a smaller environmental load could be a more efficient way to decrease emissions than reducing direct emissions such as those from electricity use. Lack of data in the LCA-databases was considered a challenge. An access to regionally customised datasets is important for the implementation of LCA clinics. Company feedback indicated that LCA clinics were useful in climate-friendly product design and increased environmental awareness, but did not lead to immediate actions to reduce emissions because of inadequate investment capabilities. Company managers had limited possibilities to use the results in marketing as comparative assessments would require a full LCA. Many company managers were willing to pay a fee sufficient to cover the costs of an LCA clinic, but some considered that the costs should be covered by external funding sources.     

Emergy analysis using US economic input-output models with applications to life cycles of gasoline and corn ethanol

A commonly encountered challenge in emergy analysis is the lack of transformity data for many economic products and services. To overcome this challenge, emergy analysts approximate the emergy input from the economy via a single emergy/money ratio for the country and the monetary price of economic inputs. This amounts to assuming homogeneity in the entire economy, and can introduce serious uncertainties in the results. This paper proposes and demonstrates the use of a thermodynamically augmented economic input-output model of the US economy for obtaining sector-specific emergy to money ratios that can be used instead of a single ratio. These ratios at the economy scale are more accurate than a single economy-wide emergy/money ratio, and can be obtained quickly for hundreds of economic products and services. Comparing sector-specific emergy/money ratios with those from conventional emergy studies indicates that the input-output model can provide reasonable estimates of transformities at least as a stop-gap measure until more detailed analysis is completed. A hybrid approach to emergy analysis is introduced and compared with conventional emergy analysis using life cycles of corn ethanol and gasoline as examples. Emergy and transformity data from the hybrid approach are similar to those from conventional emergy analysis, indicating the usefulness of the proposed approach. In addition, this work proposes the metric of return on emergy investment for assessing product alternatives with the same utility such as transportation fuels. The proposed approach and data may be used easily via web-based software.     

The representation of cyanobacteria life cycle processes in aquatic ecosystem models

Two simplified versions of a numerical life cycle model for diazotrophic cyanobacteria (of the order Nostocales) are developed and evaluated. Both consider two-life cycle stages, one growing, nitrogen-fixing stage and one stage that combines the resting, germinating and vegetative stages. The versions differ in the vertical resolution of the non-diazotrophic stage: version 1 collects the biomass in one layer at the bottom, version 2 considers sinking and rising of biomass explicitly. The results of the two versions are compared with a complex cyanobacteria life cycle model which describes four different life cycle stages each with two internal quotas for energy and nitrogen. The two simplified approaches show a good agreement with respect to the main characteristics of cyanobacteria dynamics (timing and duration of blooms, magnitude of nitrogen fixation, interannual variability). Our model study shows that both simplified approaches are suitable to be implemented into three-dimensional coastal or lake models.     

镉、汞、铅和石油烃复合污染对渤海湾常见渔业资源生物的影响初探(Effects of the Combined Pollution of Cd, Hg, Pb and Petroleum Hydrocarbons on Common Fishery Species in the Bohai Bay)

通过对1996～2005年渤海湾近岸海域海水镉、汞、铅和石油烃浓度变化的分析,发现海水中镉浓度呈明显上升趋势,汞、铅和石油烃则无明显变化趋势.加速生命试验法模型(Accelerated Life Testing model)的研究显示,1996～2005年渤海湾近岸海域海水镉、汞和铅平均浓度均已超过其对渤海湾常见渔业资源生物的安全浓度.镉、汞、铅和石油烃对生物的长期致死率鱼类分别为4.5%、16.3%、0.0%和12.0%,甲壳类为0.4%、7.9%、0.3%和6.6%,双壳类为10.5%、0.2%、0.2%和2.3%.效应加和模型(Independence Action model)的估算表明,在镉、汞、铅和石油烃组成的复合污染条件下,渤海湾常见鱼类、甲壳类和双壳类的长期死亡率分别为29.7%、14.6%和12.9%,其种群增长率分别降低约6.4%、14.6%和12.9%.与镉、汞、铅和石油烃单种污染物暴露相比,其复合污染导致的渤海湾常见渔业资源生物种群(鱼类、甲壳类和双壳类)增长率的降低更明显.因此,复合污染是导致渤海湾渔业资源衰退的重要因素。     

Monitoring and environmental modeling of earthwork impacts: A road construction case study

This study presents the contributions of materials, earth engineering machines and construction techniques to potential environmental impacts from the main items of typical road earthworks. To achieve this goal, the overall activity at a 1.9-km long French earthworks project site for a heavily trafficked highway was surveyed during its 2007–2009 construction period. Using data collected and a numerical model of road life cycle assessment (LCA), i.e. ECORCE, six indicators could be evaluated, namely: energy consumption, global warming potential, acidification, eutrophication, photochemical ozone creation, and human chronic toxicity. When available, several life cycle inventories were implemented in order to appraise indicator sensitivity with respect to the considered panel of pollutants. Results also allowed estimating from an LCA point of view: (i) the conservation of both aggregates and soil as induced by quicklime treatment and (ii) the duration necessary for projected traffic levels to offset the potential environmental impacts of the earthworks stage.