沈阳市浑南新区规划战略环境评价替代方案的制定

主要通过制定替代方案的方法包括成本一效益分析法、对比替代方案法、专家判断法和权重法等 ,结合沈阳市浑南新区发展规划 ,从经济发展与环境保护并重的角度出发 ,以更高层次和更大范围去选择既能实现既定发展目标又能实现环境保护要求的替代方案     

青海省东部农业区参考作物蒸散量的变化及对气象因子的敏感性分析

使用FAO推荐的Penman-Monteith公式计算了青海省东部农业区7个气象代表站的逐日参考作物蒸散量(ET₀),运用多窗谱方法(MTM)对青海省东部代表站的ET₀的变化周期进行了分析,同时,分析了影响ET₀的主要气象要素的变化趋势,运用基于偏导数的敏感系数法分析了生长季ET₀对气温、日照时数、相对湿度、风速的敏感性,结果表明,青海省东部农业区的7个站点有比较一致的19.23~22.22 a的周期;整个东部农业区的气温(最高温度、最低温度、平均温度)呈明显的上升趋势,日照时数、风速、相对湿度则随纬度的变化而趋势不同,北纬36°以南的两个站日照时数、风速均有增加的趋势,相对湿度则减小,以北的5个站则呈相反的变化;ET₀对日照时数最为敏感,其次是气温、相对湿度和风速;敏感系数在整个生长季随气象因子的变化而变化,日照时数敏感系数呈波动状,最大值出现在4月,最小值出现在9月,气温敏感系数呈现单峰型变化,最大值出现在7月,风速敏感系数则呈单谷型变化,最小值出现在7月。     

Reach‐Scale Geomorphic and Biological Effects of Localized Streambank Armoring

Armoring of streambanks is a common management response to perceived threats to adjacent infrastructure from flooding or erosion. Despite their pervasiveness, effects of reach‐scale bank armoring have received less attention than those of channelization or watershed‐scale hydromodification. In this study, we explored mechanistic ecosystem responses to armoring by comparing conditions upstream, within, and downstream of six stream reaches with bank armoring in Southern California. Assessments were based on four common stream‐channel assessment methods: (1) traditional geomorphic measures, (2) the California Rapid Assessment Method for wetlands, (3) bioassessment with benthic macroinvertebrates, and (4) bioassessment with stream algae. Although physical responses varied among stream types (mountain, transitional, and lowland), armored segments generally had lower slopes, more and deeper pools and fewer riffles, and increased sediment deposition. Several armored segments exhibited channel incision and bank toe failure. All classes of biological indicators showed subtle, mechanistic responses to physical changes. However, extreme heterogeneity among sites, the presence of catchment‐scale disturbances, and low sample size made it difficult to ascribe observed patterns solely to channel armoring. The data suggest that species‐level or functional group‐level metrics may be more sensitive tools than integrative indices of biotic integrity to local‐scale effects.     

项目教学法在高职商务英语谈判教学中的应用——以中国环境管理干部学院为例

项目教学法是教师为主导,学生为主体,项目为载体,任务为驱动,以职业能力培养为目标,以社会需求为背景的系统的教学方法。以中国环境管理干部学院为例,通过讲述项目教学法的特点及在实践教学中的应用原则,提出了项目教学法在学院商务英语谈判课堂上进行的步骤、遇到的困难,并提出了相应的改进措施。     

我国现行环境统计指标体系改进方向

我国现行环境统计指标体系在指标的选择和可操作性方面存在缺陷和不足,主要表现为污染物排放量的计算方法模糊、污染物排放标准未能得到有效实施、非重点工业排放量取值比例有待调整、污染源调查范围不能与时俱进、环境质量指标体系未纳入环境统计,这些问题需进一步完善,才能更好地适应环境管理工作需要。     

环氧化合物分子结构与致变活性的关系

由化学物质毒性效应登录(RTECS)1998年光盘系统检索获得86种环氧化合物对鼠沙门氏菌致变活性数据.应用主成分分析法从11种分子描述符中选择出5种对致变活性有明显影响的描述符:碳原子数,苯环数,氢原子数,烷基数和氧原子数.通过样本学习集训练并优化神经网络结构,建模分类预报:对于86个样本,低和高2类活性,正确分类率达到92%.结果表明:3～4个骈接苯环的环氧化物的特殊结构具有很强的致变活性.     

沈阳市浑南新区二氧化硫总量控制研究

为了实现浑南新区的规划目标,必须对新区SO2 进行总量控制。本文利用A—P值法对浑南新区SO2 的总量控制进行研究,给出了整个新区SO2 的总量控制目标及规划中的各个高架点源污染源的总量控制目标,为新区总量控制的实施提供了决策依据。     

模糊识别在水质综合评价中的应用

应用模糊数学方法对水质进行综合评价,其关键问题是如何合理地确定各评价指标的权重．将最优权法引入模糊评价以确定各评价指标的权系数．通过求解权向量的最优解来确定各指标权重,可避免确定评价指标权重的主观任意性,增加评价结果的分辨性．实例计算与结果对比表明,该方法克服了各指标的权系数随实测样本的不同而变化和评价结果分辨性差的缺点,提高了模型的通用性和评价结果的可比性,同时也简化了多次重复确定权系数的工作量．     

IMS Method Performance Analyses for Giardia in Water Under Differing Conditions

Immunomagnetic separation (IMS) has been specified as a standard method for the measurement of Giardia under USEPA Method 1623. In this study, IMS was evaluated on the basis of recovery efficiencies for Giardia cysts under various IMS operation conditions. Significant change in recovery was observed by altering the debris ratio of water samples. Notably, cyst recovery efficiencies utilizing IMS dropped with increased turbidity, and results for varying dosages of magnetic beads and cysts indicate that 1 / 100 immunomagnetic beads is sufficient to conjugate large numbers of cysts. Changing vessel volume and replacing the sample buffer had no significant effect on cyst recovery efficiencies.     

联合上限法和主应力法确定模具表面压力分布的研究(Ⅰ)

提出了一种联合上限法(Upper Bound Method)和主应力法(Slab Method)确定模具与金属接触表面压力分布的方法.这是一种基于利用上限法确定金属流动和变形区,然后根据主应力法原理计算接触面压力分布的方法,简称UBM/SM联合法.这种方法较其它方法简便,而且能给出计算压力分布的解析式.本文阐述该法的基本原理,并用它计算杯形件反挤时凸凹模表面的压力分布.