Oil spill cleanup cost estimation—Developing a mathematical model for marine environment

The field of oil spill cost modelling is not as well explored as desirable. Generally speaking, the existing models have either low accuracy, in that their predictions are far from the real cost, or low applicability, in that they are only valid under very specific conditions; such as in one particular country. This work strives to construct a model that is functional in a global scope and still possess a high level of accuracy. The resulting attempt is in many ways superior to the publicly available competitors, not only because of its predictive capacity but also because the model is quick to use, and its input variables should be readily available to any informed user. The model is more accurate comparing with similar available models. However, further study is needed to modify it to obtain more realistic results.     

An approach to optimise nutrient management in environmental sanitation systems despite limited data

The material flow analysis method can be used to assess the impact of environmental sanitation systems on resource consumption and environmental pollution. However, given the limited access to reliable data, application of this data-intensive method in developing countries may be difficult. This paper presents an approach allowing to develop material flow models despite limited data availability. Application of an iterative procedure is of key importance: model parameter values should first be assessed on the basis of a literature review and by eliciting expert judgement. If model outputs are not plausible, sensitive input parameters should be reassessed more accurately. Moreover, model parameters can be expressed as probability distributions and variable uncertainty estimated by using Monte Carlo simulation. The impact of environmental sanitation systems on the phosphorus load discharged into surface water in Hanoi, Vietnam, is simulated by applying the proposed approach.     

Low cost measurements of nitrogen and sulphur dry deposition velocities at a semi-alpine site: gradient measurements and a comparison with deposition model estimates

The conditional time averaged gradient method was used to measure air-surface exchange of nitrogen and sulphur compounds at a semi-alpine site in Southern Norway. Dry deposition velocities were then obtained from the bi-weekly concentration gradient measurements. Annual deposition velocities were found to be 1.4, 11.8 and 4.0 mm s(-1) for NH3, HNO3 and SO2, respectively, if all data were included, and to be 10.8, 11.8 and 13.0 mm s(-1), respectively, if only positive values were included. Measured deposition velocities were compared to two sets of values estimated from a big-leaf dry deposition module applying to two different land types (short grass and forbs, and tundra), driven by measured micrometeorological parameters. The deposition module gives reasonable values for this site throughout the year, but does not reproduce the large variability as shown in the measured data. No apparent seasonal variations were found from either measurements or module estimates due to the very low productivity of the studied area.     

碳氮磷比失调对污水生物脱氮除磷的影响

我国南方城市污水普遍存在低碳相对高氮磷特征,本文介绍了同时生物脱氮除磷的机理、对碳源的需求与竞争,以及一些针对此类污水生物脱氮除磷的改进工艺及其在实际运用中的效果,并对此类污水的处理方向进行了展望。     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

皖南丘陵地区小流域氮素径流输出的动态变化

以亚热带北部皖南丘陵地区小流域定位实地观测为基础 ,研究了农林共存小流域氮素径流输出规律。发现小流域氮素径流输出季节性变化明显。降雨和施肥是影响这一变化的重要因子 ,模拟分析表明 ,它们与氮素输出之间具有很好的线性相关关系     

Acoustic concomitants of the defensive discharges of a primitive bombardier beetle (Metrius contractus)

Summary. Metrius contractus, a primitive paussoid bombardier beetle, emits its defensive quinonoid froth with accompanying sound (a faint “hiss”), but the sound is not pulsed, indicating that the secretory emission itself is not pulsed. Pulsed secretory delivery in bombardier beetles appears to occur in Brachinini only. Received 8 July 2001; accepted 23 July 2001.     

污染源排气自动监测氮氧化物的不确定度分析

使用烟气排放连续监测系统自动监测仪器测定污染源排气中氮氧化物,按照最新的《测量不确定度评定与表示》(JJF1059.1—2012)的要求,测量不确定度评定的要求,首次对其氮氧化物自动监测的不确定度进行分析,得出不确定度报告。     

核电站温排水卫星遥感监测应用研究

选取我国 HJ－1 B卫星红外相机为遥感数据源,在介绍了温排水卫星遥感监测的技术流程和基本原理之后,重点论述了海表温度反演的算法和基准温度提取的基本原则。以2013年1月17日大亚湾核电站和2013年5月22日田湾核电站2景 HJ－1 B红外相机数据为应用实例,说明了卫星遥感监测可作为开展核电站温排水影响监测与热污染评价的首选技术方向和主要监测手段,阐述了其在核电站温排水影响后评估中的作用和意义。     

核电站温排水遥感监测方法研究——以田湾核电站为例

以江苏省连云港田湾核电站为主要研究区,通过热红外遥感技术研究温排水热污染现象,综合应用美国Landsat卫星热红外波段数据及地面气象测站资料,定量反演核电站建成前后附近海域水温分布与变化情况。研究结果表明,遥感技术完全能够满足温排水监测要求,对于完善近岸海域生态环境保护工作具有积极意义。