南京市小型餐饮娱乐服务业废水排放系数计算

运用数理统计学的分层抽样法对南京市2001年-2003年小型餐饮娱乐服务业废水中具有相关性的主要污染因子的排放浓度进行了统计,并计算出排放系数,提出用计算的废水排放系数征收小型餐饮娱乐服务业的排污费,实例表明,在该行业运用这一方法征收排污费是可行的。     

污染控制中混合菌的研究

论述优势混合菌的选育混合菌在废水污染物的降解及废物资源化中的作用,指出目前存在的问题和今后的发展方向。     

用“多因子空间叠加法”评价城市区域环境综合质量

对常用的环境影响评价的“单因子评价法”进行了扩充，在此基础上提出了一种评价城市区域环境综合质量的方法——“多因子空间叠加法”。该方法采用计算机辅助设计技术、运用区位理论分析影响区域环境质量的因子的作用分值及其权重，最后根据计算得出的综合分值进行评价。通过实例运用分析，表明该方法较好地表征出多个因子对评价区域的影响，得出一个较为全面的综合性结果。     

江苏省胶合板行业甲醛污染特征及排放系数

以年产量超过10 000 m3的生产企业为研究对象,采用现场调研与采样检测相结合的方法,分析江苏省胶合板行业甲醛污染特征和排放系数。筛选60家典型企业,计算其甲醛排放系数R值（甲醛/胶粘剂）和K值（甲醛/产值）两个指标,结果表明,该省胶合板企业R均值为0.001 65 kg/kg,K均值为0.46 kg/万元。使用酚醛树脂胶的胶合板经济附加值最高,且对大气环境更友好,脲醛树脂胶的甲醛排放系数最高,应逐步减少使用。     

南京市典型地区大气多环芳烃污染特征及健康风险评价

采用气相色谱-质谱法,于2016年9月和12月对南京市2个典型地区大气中16种多环芳烃(PAHs)的质量浓度进行分析,并开展了PAHs组成特征、来源解析及人体健康风险评价研究。结果表明,工业区(六合区)和生活区(江宁区)大气(气态和可吸入颗粒态)中16种PAHs的质量浓度分别为914.82和712.27 ng/m~3,苯并[a]芘毒性等效浓度分别为274.1和309.84 ng/m~3,且呈现冬季高、秋季低的特征。比值法源解析结果表明,燃煤污染是六合区PAHs污染主要来源,而江宁区主要表现为交通污染。人体健康风险评价结果表明,六合区和江宁区人群通过大气吸入PAHs的超额致癌风险分别为5.17×10~(-5)和5.85×10~(-5),均略高于可接受水平10~(-6)。     

Cars on crutches: How much abatement do smog check repairs actually provide?

Not as much abatement as has been presumed. Smog check programs aim to curb tailpipe emissions from in-use vehicles by requiring repairs whenever emissions, measured at regular time intervals, exceed a certain threshold. Using data from California, we estimate that on average 41% of the initial emissions abatement from repairs is lost by the time of the subsequent inspection, normally two years later. Our estimates imply that the cost per pound of pollution avoided is an order of magnitude greater for smog check repairs than alternative policies such as new-vehicle standards or emissions trading among industrial point sources.     

Ecological selection of bacterial taxa with larger genome sizes in response to polycyclic aromatic hydrocarbons stress

Polycyclic aromatic hydrocarbons(PAHs) are ubiquitous priority pollutants that cause great damage to the natural environment and health. Average genome size in a community is critical for shedding light on microbiome’s functional response to pollution stress within an environment. Here, microcosms under different concentrations were performed to evaluate the selection of PAHs stress on the average genome size in a community. We found the distinct communities of significantly larger genome size w...     

Prices vs quantities with multiple pollutants

We examine the choice of policy instruments (price, quantity or a mix of the two) when two pollutants are regulated and firms' abatement costs are private information. Whether abatement efforts are complements or substitutes is key determining the choice of policies. When pollutants are complements, a mixed policy instrument with a tax on one pollutant and a quota on another is sometimes preferable even if the pollutants are identical in terms of benefits and costs of abatement. Yet, if they are substitutes, the mixed policy is dominated by taxes or quotas.     

An evidence of salinity impact on the bioaccumulation of heavy metals in fishes collected from the Messolonghi lagoon in Greece

The impact of salinity and water exchange rate on the accumulation of heavy metals in the benthic fish Zosterissesor ophiocephalus, collected from the shallow sublagoons Tholi and Paleopotamos, was studied. Both sublagoons are influenced by the intensive agricultural activity of the surrounding area in terms of the chemical substances’ drainage, and by the untreated sewage discharges of an urbanized area with Paleopotamos being affected in lesser extent. Paleopotamos is characterised by restricted water renovation, resulting to much higher salinity than Tholi. The bioaccumulation of the heavy metals studied (Manganese, Zinc and Copper), reveals differences among the metals with females showing higher values. Specimens from Paleopotamos showed statistically significant higher bioaccumulation of the heavy metals in both sexes, which is attributed to the extremely high salinity of this sublagoon.     

Inverse uncertainty characteristics of pollution source identification for river chemical spill incidents by stochastic analysis

Identifying source information after river chemical spill occurrences is critical for emergency responses. However, the inverse uncertainty characteristics of this kind of pollution source inversion problem have not yet been clearly elucidated. To fill this gap, stochastic analysis approaches, including a regional sensitivity analysis method, identifiability plot and perturbation methods, were employed to conduct an empirical investigation on generic inverse uncertainty characteristics under a well-accepted uncertainty analysis framework. Case studies based on field tracer experiments and synthetic numerical tracer experiments revealed several new rules. For example, the release load can be most easily inverted, and the source location is responsible for the largest uncertainty among the source parameters. The diffusion and convection processes are more sensitive than the dilution and pollutant attenuation processes to the optimization of objective functions in terms of structural uncertainty. The differences among the different objective functions are smaller for instantaneous release than for continuous release cases. Small monitoring errors affect the inversion results only slightly, which can be ignored in practice. Interestingly, the estimated values of the release location and time negatively deviate from the real values, and the extent is positively correlated with the relative size of the mixing zone to the objective river reach. These new findings improve decision making in emergency responses to sudden water pollution and guide the monitoring network design.

Open image in new window