Optimization of the O3/H2O2 process with response surface methodology for pretreatment of mother liquor of gas field wastewater

• Real ML-GFW with high salinity and high organics was degraded by O₃/H₂O₂ process. • Successful optimization of operation conditions was attained using RSM based on CCD. • Single-factor experiments in advance ensured optimal experimental conditions. • The satisfactory removal efficiency of TOC was achieved in spite of high salinity. • The initial pH plays the most significant role in the degradation of ML-GFW. The present study reports the use of the O₃/H₂O₂ process in the pretreatment of the mother liquor of gas field wastewater (ML-GFW), obtained from the multi-effect distillation treatment of the gas field wastewater. The range of optimal operation conditions was obtained by single-factor experiments. Response surface methodology (RSM) based on the central composite design (CCD) was used for the optimization procedure. A regression model with Total organic carbon (TOC) removal efficiency as the response value was established (R² = 0.9865). The three key factors were arranged according to their significance as: pH>H₂O₂ dosage>ozone flow rate. The model predicted that the best operation conditions could be obtained at a pH of 10.9, an ozone flow rate of 0.8 L/min, and H₂O₂ dosage of 6.2 mL. The dosing ratio of ozone was calculated to be 9.84 mg O₃/mg TOC. The maximum removal efficiency predicted was 75.9%, while the measured value was 72.3%. The relative deviation was found to be in an acceptable range. The ozone utilization and free radical quenching experiments showed that the addition of H₂O₂ promoted the decomposition of ozone to produce hydroxyl radicals (·OH). This also improved the ozone utilization efficiency. Gas chromatography-mass spectrometry (GC-MS) analysis showed that most of the organic matters in ML-GFW were degraded, while some residuals needed further treatment. This study provided the data and the necessary technical supports for further research on the treatment of ML-GFW.     

Corrosion behavior of steels for CO2 injection

The process chain for Carbon Capture and Sequestration (CCS) includes tubing for injection of CO₂ into saline aquifers. The compressed CO₂ is likely to contain specific impurities; small concentrations of SO₂ and NO₂ in combination with oxygen and humidity are most harmful. In addition, CO₂ saturated brine is supposed to rise in the well when the injection process is interrupted. The material selection has to ensure that neither CO₂ nor brine or a combination of both will leak out of the inner tubing. In this comprehensive paper the investigated materials range from low-alloy steels and 13% Cr steels up to high-alloy materials. Electrochemical tests as well as long term exposure tests were performed in CO₂, in brine and combination of both; pressure was up to 100 bar, temperature up to 60 °C. Whereas the CO₂ stream itself can be handled using low alloy steels, combinations of CO₂ and brine require more resistant materials to control the strong tendency to pitting corrosion. The corrosion behavior of heat-treated steels depends on factors such as microstructure and carbon content. For different sections of the injection tube, appropriate materials should be used to guarantee safety and consider cost effectiveness.     

Rapid liquid chromatographic analysis of Metoclopramide in pharmaceutical preparations

A sensitive, accurate and reproducible method for the analysis of metoclopramide, a gastrointestinal drug, has been described. An isocratic HPLC elution method was employed which requires about 10 minutes to be performed. The concentration of metoclopramide hydrochloride preparations was found to be 95.1 ±0.3% and 94.21 ±0.25% in tablet and injection formulations, respectively.     

How aerosol direct effects influence the source contributions to PM2.5 concentrations over Southern Hebei,China in severe winter haze episodes

The aerosol direct effects result in a 3%–9% increase in PM_2.5 concentrations over Southern Hebei. These impacts are substantially different under different PM_2.5 loadings. Industrial and domestic contributions will be underestimated if ignoring the feedbacks. Beijing-Tianjin-Hebei area is the most air polluted region in China and the three neighborhood southern Hebei cities, Shijiazhuang, Xingtai, and Handan, are listed in the top ten polluted cities with severe PM_2.5 pollution. The objective of this paper is to evaluate the impacts of aerosol direct effects on air quality over the southern Hebei cities, as well as the impacts when considering those effects on source apportionment using three dimensional air quality models. The WRF/Chem model was applied over the East Asia and northern China at 36 and 12 km horizontal grid resolutions, respectively, for the period of January 2013, with two sets of simulations with or without aerosol-meteorology feedbacks. The source contributions of power plants, industrial, domestic, transportation, and agriculture are evaluated using the Brute-Force Method (BFM) under the two simulation configurations. Our results indicate that, although the increases in PM_2.5 concentrations due to those effects over the three southern Hebei cities are only 3%–9% on montly average, they are much more significant under high PM_2.5 loadings (~50 μg·m⁻³ when PM_2.5 concentrations are higher than 400 μg m⁻³). When considering the aerosol feedbacks, the contributions of industrial and domestic sources assessed using the BFM will obviously increase (e.g., from 30%–34% to 32%–37% for industrial), especially under high PM_2.5 loadings (e.g., from 36%–44% to 43%–47% for domestic when PM_2.5>400 μg·m⁻³). Our results imply that the aerosol direct effects should not be ignored during severe pollution episodes, especially in short-term source apportionment using the BFM.     

Enhancing generic ecological model for short-term prediction of Southern North Sea algal dynamics with remote sensing images

Physically based numerical modelling follows from the basic understanding of the underlying mechanisms and is often represented by a set of (partial differential) equations. It is one of the main approaches in population dynamics modelling. The emphasis of the model introduced in this paper is on the simulation of short-term spatial and temporal dynamics of harmful algal bloom (HAB) events. Total suspended matter (TSM) concentration is one of the dominant factors for harmful algal bloom (HAB) prediction in North Sea. However, the modelling of suspended matter contains a high degree of uncertainty in this area. Therefore, this research aims to achieve a better estimation for the short-term prediction of harmful algal bloom development in both space and time by using spatially distributed TSM retrieved from remotely sensed images as physically based model inputs. In order to supply complete spatially covered datasets for the physically based model instrument: generic ecological model (GEM), this research retrieves TSM information from MERIS images by means of proper estimation techniques including biharmonic splines and self-learning cellular automata. A better estimation of HAB spatial pattern development is achieved by adding spatially distributed TSM data as inputs to original GEM model, and it proved that chlorophyll-a concentration in this area is very sensitive to TSM concentration.     

软土沉降位移作用下大口径管道轴向应力状态研究*

为准确掌握大口径管道的轴向应力应变状态,保障管道的安全运行,通过假定4类不同形式的软土沉降位移,研究不同沉降形式对管道轴向应力状态的影响。采用非线性有限元方法建立管道轴向应力应变参数化数值计算模型,开展影响因素分析。结果表明:针对软土沉降位移作用下1 422 mm X80大口径管道,沉降量相同时,突变型位移载荷作用下管道受到的轴向应力最大,最大轴向应力位于两侧非沉降区距管道中心约53 m处;软土沉降量达到工程实际中可能的最大值1 m时,大口径X80管道内轴向应力小于0.9倍管材屈服强度,管道环焊缝可以采用基于应力的工程适用性评估方法开展ECA(Engineering Critical Assessment)评价。     

Climate changes in the past century and radial increment of pine in the Southern Ural steppe

Changes in the main climatic factors (air temperature and total precipitation) and their effect on the radial increment of Scots pine (Pinus sylvestris L.) over the period from 1933 to 2002 were studied in an insular pine forest growing in the steppe zone of the Southern Urals. Evidence for a significant increase in the amount of precipitation and air temperature in the second half of this period was obtained. Functions of response of radial increment indices to climatic parameters were analyzed. Relative contributions of air temperature and precipitation to variation in the radial increment of pine in different time intervals proved to differ in relation to climate changes during the past century.     

Reproduction of the Siberian spruce in the timberline ecotone of the Iremel’ Massif

Quantitative and qualitative characteristics of cones and seeds and the emergence and survival of seedlings in the Siberian spruce (Picea obovata Ledeb.) were studied in different parts of the timberline ecotone on the Iremel’ Massif, the Southern Urals, from 2003 to 2006. In the productive year 2003, a decrease in the number of cones (from 110000 to 3000 per hectare), the yield of seeds (from 13 × 10⁶ to 0.09 × 10⁶ per hectare), and their laboratory germination rate (from 34 to 14%) with an increase in elevation above sea level was recorded. In 2004, significant differences in the number of seedlings per hectare were revealed between the lower, middle, and upper parts of the ecotone (85 200, 19 800, and 0–400 ind., respectively). It has been shown that the greater part of seedlings (76–96%) perish during the first cold period. New generations of spruce trees are formed only after productive years. Seed production and seedling mortality in spruce apparently depend not only on air temperature and soil moistening but also on snow depth and soil temperature, which change more abruptly along the altitudinal gradient.     

Sustainable options of post treatment of UASB effluent treating sewage: A review

The upflow anaerobic sludge blanket (UASB) process is reported to be a sustainable technology for domestic wastewaters treatment in developing countries and for small communities. However, the inability of UASB process to meet the desired disposal standards has given enough impetus for subsequent post treatment. In order to upgrade the UASB based sewage treatment plants (STPs) to achieve desired effluent quality for disposal or for reuse, various technological options are available and broadly differentiated as primary post-treatment for the removal of organic and inorganic compounds and suspended matter; secondary post-treatment for the removal of hardly degradable soluble matter, colloidal and nutrients; and polishing systems for removals of pathogens. Hence, this paper discusses the different systems for the treatment of UASB reactor effluent treating sewage. Additionally, a comparative review, an economic evaluation of some of the emerging options was conducted and based on the extensive review of different integrated combination, i.e. UASB-different aerobic systems, a treatment concept based on natural biological mineralization route recognized as an advanced technology to meet all practical aspects to make it a sustainable for environmental protection, resource preservation and recovering maximum resources.     

苏南地区农村宅基地转型研究：基于利用状态的视角

农村宅基地转型是土地利用转型研究的重要内容。目前学界关于宅基地转型的研究主要集中在规模结构等显性形态方面,对隐性转型的研究仍较欠缺。以乡村经济发达的苏南地区为例,通过对正常使用、空置、废弃等不同利用状态宅基地空间分异规律的刻画,探索其功能转型的一般规律,并进一步分析宅基地空置与废弃的影响因素。结果表明：在乡村振兴战略实施背景下,“房子不用来住”的问题在农村地区同样存在,而且在不同代际和空间区位上农村宅基地的利用状态有所差异。具体地,1980年以前的老宅基地从距离城镇较远和较近的“两端”开始,其空废比率向中间地带递减;随着市场化和城镇化水平提升,1980—2000年的中龄宅基地空废比率呈现由近郊向外递减的趋势,城镇化影响下的距离衰减规律明显。近年来,伴随农村宅基地财产/资产属性的逐步显现,农村宅基地的利用状态与空间区位之间的关联关系弱化。2010年以后新宅基地的空置率出现反弹,尤其靠近城镇的农村地区“囤地”现象严重,发端于城镇地区的“地产霸权”正在向乡村地区蔓延。