山东省城市空气自动监测监控系统数据的应用设计和使用方法

山东省城市空气自动监测监控系统的主要功能是将全省城市自动监测站数据利用计算机网络、数据仓库等技术导入到环境监测数据仓库中，实现全省城市空气质量自动监测的统一监控和监测信息的自动管理和发布。本文简单介绍了系统控制中心端监测数据统计应用部分的功能设计和实现方法。     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

催化湿式氧化法处理吡虫啉农药废水

自制了Cu／Mn，Cu／Ce，Cu／Ni，Ce／Mn，Ce／Ag等催化剂，经过性能比较，选择催化活性较高且金属溶出量较小的Cu／Ni作催化剂。用催化湿式氧化法处理吡虫啉农药废水，考察了各种因素对处理效果的影响。实验结果表明：在进水pH为6．93、Cu／Ni加入量为4．0g、反应温度为190oC、氧分压为1．6MPa、反应时间为120min的条件下，COD去除率为95％；处理后废水的BOD5／COD从0．093增至0．590，可生化性明显改善。     

模糊聚类法在大气环境质量评价中的应用

通过对2004年甘肃省5个有代表性城市的大气质量监测数据进行分析,较为详细地介绍了将模糊聚类法应用于大气环境质量综合评价的过程,从而展示了模糊聚类在环境评价和管理中的积极作用和重要意义.     

旋转风幕流场的数值模拟及实验研究

基于流体力学中空气射流理论,建立气幕旋风排风罩流场的三维数学模型。影响气幕旋风排风罩效果的因素很多,主要包括:射流气动参数、吹吸气动参数以及流动空间的边界条件和装置结构等。针对不同送风速度、不同送风角度下两种情况进行分析,并利用FLUENT计算动力学软件对这两种情况下气幕旋风排风罩的流场进行了数值模拟,经过比较确定出最佳效果时的参数,并利用示综烟雾进行了实验。结果表明:所建立的气幕旋风排风罩流场的数学模型完全正确,所确定的最佳效果时的参数和实际情况基本一致,可用于工程实际。     

室内安全生态学研究

从人们最基本的生存需求之一:安全性需要和室内微型生态系统的可持续发展角度出发,对人们所面临的室内环境问题进行总结归纳;在安全生态学意义下对室内环境问题的研究重新进行了分类;在室内环境问题研究方面提出加强室内安全生态学研究的建议。对室内安全生态学研究提出一些新的观点和看法;给出了室内安全生态学的架构体系;较为全面地归纳了室内各方面的环境问题;初步探讨了如何构建室内安全生态学评价的理论体系。     

生活垃圾填埋产沼的提取净化利用

垃圾填埋是目前我国各城市广为采用的垃圾处理方式，但垃圾填埋产沼以后对沼气的回收利用却不被人们所熟知和重视。由此造成了对可开发利用的二次能源的极大浪费，而沼气对周围环境也造成了严重的污染并对大气臭氧层造成了破坏。本文阐述了垃圾填埋产沼回收的必要性和经济性，对垃圾填埋产沼提取利用、制取汽车压缩气的可行性及工艺流程进行了分析和介绍。     

A methodological framework for improving air quality monitoring network layout. Applications to environment management

This work aims to provide a methodology framework which allows to improve the performance and efficiency of an air quality monitoring network (AQMN). It requires to be constituted by a minimum and reliable number of measurement sites. Nevertheless, the AQMN efficiency should be assessed over time, as a consequence of the possible emergence of new emission sources of air pollutants, which could lead to variations on their spatial distribution within the target area. PM₁₀ particles data monitored by the Community of Madrid's (Spain) AQMN between 2008 and 2017 were used to develop a methodology to optimize the AQMN performance. The annual spatial distribution of average PM₁₀ levels over the studied period monitored by all current stations vs those more representative was provided by a geographic information system (GIS), and the percentage of similarity between both postulates was quantified using simple linear regression (> 95%). As one innovative tool of this study, the practical application of the proposed methodology was validated using PM₁₀ particles data measured by AQMN during 2007 and 2018, reaching a similitude degree higher than 95%. The influence of temporal variation on the proposed methodological framework was around 20%.The proposed methodology sets criteria for identifying non-redundant stations within AQMN, it is also able to appropriately assess the representativeness of fixed monitoring sites within an AQMN and it complements the guidelines set by European legislation on air pollutants monitoring at fixed stations, which could help to tackle efforts to improve the air quality management.     

Applying integrated assessment methodologies to air quality plans: Two European cases

Air pollution Integrated Assessment Models (IAM) can be used for determining how emissions should be reduced to improve air quality and to protect human health in a cost-efficient way. The application of IAM is also useful to spread information to the general public and to explain the effectiveness of proposed Air Quality Plans. In this paper, the application of the RIAT+ system to determine suitable abatement measures to improve the air quality at a regional/local level is presented for two European cases: the Brussels Capital Region (Belgium) and the Porto Urban Area (Portugal). Both regions are affected with PM10 or NO₂ concentrations that exceed the limit values specified by the European Union legislation. To properly assess air quality abatement measures a surrogate model was used, allowing the implementation of an efficient optimization procedure. This model is derived in both cases through a set of simulations performed using a Chemistry Transport Model fed with different emission reduction scenarios. In addition, internal costs (due to the implementation of emission reduction measures) and external costs (due to population exposure to air pollutant concentrations) of policy options were considered. The application of this integrated assessment modelling system in scenario (Brussels case) and optimization (Porto) modes contributes to identifying some advantages and limitations of these two approaches and also provides some guidance when urban air quality has to be assessed.