焦炉装煤烟尘治理方案的探讨

焦炉装煤烟尘含有害物质，污染环境，危害人体健康。袋式除尘器的使用，消除了烟尘的污染，但因投资大、运行费用高、操作复杂，难以得到快速、广泛的推广。根据实验结果和已有应用情况，本文推荐了三相流化床除尘装置和颗粒层除尘器，它们可用于焦炉装煤烟尘治理，其投资和运行费用会大大降低。     

宁波市城市污水处理厂污泥处置方案探讨

随着城市污水处理率提高导致的污水污泥产量的增长趋势也使得污水污泥的处理问题更为突出。在总结国内外城市污泥处置技术发展趋势的基础上,结合宁波市的实际情况,根据无害化、减量化和资源化的原则,提出城市污泥近远期处置方案,并对处置方案作出可行性分析。     

氧化亚铁硫杆菌对亚铁离子的氧化及其动力学研究

采用9K培养基研究了氧化亚铁硫杆菌氧化Fe^2＋过程中,pH和氧化还原电位的变化规律,并对Fe^2＋的氧化过程进行动力学分析,确定了其反应级数及反应速率常数。结果表明,（1）在温度为30℃,摇床转速为150r／min的条件下,氧化亚铁硫杆菌的最佳接种量为10．0％;（2）Fe^2＋初始质量浓度在11．39～21．72g／L时,随着浓度的增大,Fe^2＋达到100％转化率需要的时间增加;（3）氧化亚铁硫杆菌对Fe^2＋的氧化可近似看作一级反应,反应速率常数为0．0527～0．0788h。     

生态清淤施工过程对巢湖水质影响的模拟

本研究以巢湖生态清淤为例,在水动力模型的基础上,采用平面二维恒定流和悬浮物扩散数学模型来描述生态清淤施工悬浮物的运动形态和排泥场尾水的影响。结果表明:生态清淤施工悬浮物扩散会给清淤区域内及周边约660 m范围的水体水质造成一定的影响。排泥场尾水排放口下游悬浮物最高浓度约4.8 mg/L,TN浓度最大增量约为0.164 mg/L,TP浓度最大增量约为0.004 mg/L。总体来说,尾水排放的SS、TN、TP对湖区的影响范围不大,其影响程度有限。     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

基于化工园区整体风险量分析的安全规划研究

通过对园区安全容量和危险量的分析,得到园区整体的风险评估值;提出并定义园区危安比最大临界点,用其反映园区的最大可接受风险量;运用"二八法则",确定危安比上限;当危安比在3种不同值域区间下,对应的园区安全规划的重点不同;从园区整个生命周期考虑,提出包含各个阶段的园区安全规划主要内容。     

采掘诱发地震的成因及对策

根据煤或岩体的赋存特征及采动后的受力特点，将采矿及掘进等工程进行过程中诱发的地震灾害分为三类，即完整煤岩体受压应力作用的失稳、顶底板受拉应力型地震及断层走滑受剪型诱发地震。文章在分别分析其成因的基础上，研究了采矿诱发三种类型地震的发生条件，提出了防治发生诱发地震的对策。     

开敞空间可燃气云爆炸冲击波超压及灾害动力响应研究评述

为了进一步梳理和分析开敞空间可燃云爆炸冲击波超压传播规律及灾害动力响应方面的各项研究成果,推进可燃气体爆炸安全防控,减少人员伤亡和经济损失。在分析现有研究的基础上,总结开敞空间可燃气云爆炸冲击波超压传播规律及灾害动力响应研究等方面存在的不足,提出开敞空间多元混合气体爆炸冲击波超压传播规律研究、多影响参数下可燃气云爆炸冲击波超压传播规律定量分析、基于可燃气云爆炸冲击波超压作用下的承载体动力响应等未来研究的关键技术问题。     

基于热湿交换理论的巷道风流温、湿度影响因素研究

为了研究巷道风流参数的影响因素、预测风流温湿度的变化规律,结合热湿交换理论,建立了风流与围岩壁面之间热湿交换的数学模型,以及贴体坐标系下围岩内部温度场的导热微分方程;利用数值方法,将围岩内部的导热问题与影响风流参数变化的热湿交换问题耦合起来,并以大柳塔煤矿52505综采工作面为例进行计算,得到了与实测参数较为一致的模拟结果,验证了该数值方法的有效性。研究结果表明:风流温度受原始岩温、入风流温度、局部热源强度等因素的影响,风流相对湿度与入风流温、湿度以及井下湿源的数量和强度有关;巷道壁温作为将围岩温度场与风流参数之间关联起来的主要因素,对模拟结果影响较大,其数值取决于壁面与风流之间热湿交换以及围岩原始岩温。