Linking Fine-Scale Sub-Arctic Vegetation Distribution in Complex Topography with Surface-Air-Temperature Modelled at 50-m Resolution

This article presents the impact of the ecological investment in ironworks (dust filter installation) and construction works at a highly contaminated brownfield site on the chemical composition of household dust (HD) and street sediment (SS) in Celje, Slovenia. The evaluation is based on two sampling campaigns: the first was undertaken 1 month before the ecological investment became operational and the second 3 years later. The results show that dust filter installations reduced the content of Co, Cr, Fe, Mn, Mo, W and Zn on average by 58% in HD and by 51% in SS. No reduction was observed at sampling points in the upwind direction from the ironworks. By contrast, the impact of the construction works on the highly contaminated brownfield site was detected by a significant increase (on average by 37%) of elements connected to the brownfield contamination in SS. Such increase was not detected in HD.     

Non-biological inhibition-based sensing (NIBS) demonstrated for the detection of toxic arsenic compounds

This work demonstrates the success of a recently developed technique in chemical amplification, non-biological inhibition-based sensing (NIBS), for the detection of toxic arsenic compounds. Screening for toxic arsenic compounds is especially important due to their prevalence in wastewater and water sources. The detection method presented in this work amplifies the chemical response of toxic arsenic compounds by developing a sensor chemistry where the analyte inhibits, rather than enhances, the rate of a catalytic reaction. This technique mimics the work done with enzyme inhibition; however, using non-biological molecules allows for selective detection without the shelf-life issue associated with biological molecules. Using NIBS we find that we can enhance the sensitivity of the system by two orders of magnitude with no apparent loss in selectivity. This work demonstrates the versatility of NIBS, showing that the technique can be of general use for the detection of toxic compounds.     

Effect of cadmium alone and in combination with butachlor on soil enzymes

The ecological toxicity of cadmium (Cd, 10 mg kg⁻¹ of dry weight soil) and butachlor (10, 50 and100 mg kg⁻¹ of dry weight soil) in both their single and combined effects on soil urease and phosphatase was studied after 1, 3, 7, 14, 21 and 28 days exposure under controlled conditions in paddy and phaeozem soils. The results showed that Cd reduced the activities of urease and phosphatase at early incubation time (1–7 days), while the reduction almost disappeared at the end of the incubation. The effect of Cd on phosphatase was more pronounced than that on urease. The activities of urease and phosphatase were reduced by butachlor, while urease activity was significantly (P < 0.05 or P < 0.01) improved when the concentrations of butachlor were 10 and 50 mg kg⁻¹ at the end of the incubation. When Cd (10 mg kg⁻¹) was combined with butachlor (50 and 100 mg kg⁻¹), the activities of urease and phosphatase became lower than without combination at early incubation time, which indicated that the toxicity of Cd significantly increased (P < 0.05 or P < 0.01). However, when Cd (10 mg kg⁻¹) was combined with butachlor (10 mg kg⁻¹), the activities of urease and phosphatase became higher than those without combination at the end of the incubation, which indicated that the toxicity of Cd decreased. It was indicated that the combined effects depended largely on the incubation time and the concentration ratio of Cd and butachlor. In addition, it was showed that the combined effects of butachlor and Cd appeared different in paddy from phaeozem, which may be related to the different properties of these soils.     

Assessment of toxic metals in waste personal computers

Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in lower levels than the legislative limits.     

Safer alternatives assessment: the Massachusetts process as a model for state governments

In 2006 the Massachusetts Toxics Use Reduction Institute conducted a study to determine if states could identify safer alternatives to five chemicals of concern. The chemicals investigated included di (2-ethylhexyl) phthalate (DEHP), formaldehyde, hexavalent chromium, lead and perchloroethylene. First, the Institute developed a methodology for assessing alternatives to these five chemicals that allowed it to quickly determine priority uses and alternatives to assess and to research the pertinent decision criteria, which included performance, technical, financial environmental and human health parameters. The methodology included important feedback from stakeholders in the state, which helped to focus and enhance the value of the work. Second, the Institute implemented the methodology over a ten month period. Based on the activities conducted by the Institute, safer alternatives were identified for each of the priority uses associated with the five chemicals studied. This report summarizes the methodology employed and provides examples of the results for one of the five chemicals, namely DEHP. The experience of the Institute and the information contained in this report indicates that alternatives assessment was a useful approach to organizing and evaluating information about chemicals and alternatives.     

The pollution release and transfer register system in the U.S. and Japan: an analysis of productivity

This study analyzes Total Factor Productivity (TFP), which includes all categories of productivity. Our measure investigates productivity in the context of the provision and dissemination of environmental information policies. We investigated data on the emission of toxic chemical substances for the U.S. and Japanese manufacturing firms, including 386 firms for the period 1999-2007 and 466 firms for the period 2001-2008. The results show that productivity improved in all nine industrial sectors and that pollution levels were high in the U.S. and Japan from 2001 to 2007. In particular, the electronics industry improved rapidly after 2002 in both countries, which may be attributed to the enforcement of RoHS and the REACH directive in Europe. As a result of these stringent policies on toxic chemical emissions, the U.S. and Japanese firms, many of which export to the European market, have strong incentives to reduce their toxic chemical emissions.     

Toxic Sublime: Imaging Contaminated Landscapes

This essay attempts to address the lack of critical analyses of images of toxins by examining the photography of landscape artists whose goal is to create a presence for contaminated sites. Imaging toxicity is no simple task as many pollutants are invisible and sites of contamination are concealed, especially for those of privilege. Contemporary artists who attempt this challenge are often criticized that the beauty of their images obfuscates the health and environmental risk of the polluted sites they photograph. In response, this essay introduces the concept of the toxic sublime as a means of analyzing the tensions arising from visual representations of environmental contamination: beauty and ugliness, magnitude and insignificance, the known and the unknown, inhabitation and desolation, security and risk. The essay charts the evolution of the sublime in the US, describing how it has evolved from sites of nature to sites of technology to human damaged landscapes, some of which produce a toxic sublime. Through a close examination of Manufactured Landscapes, a twenty-five year retrospective of the images of noted environmental photographer Edward Burtynsky, this essay extends our understanding of the invention of the sublime in images, reconceptualizes the sublime response to contaminated places, as well as adding to our knowledge of how visual texts function to encourage contemplation of the viewers’ position within a polluted world.     

Preparation,characterization and toxic activity of oxovanadium(IV) mixed-ligand complexes

New oxovanadium(IV) mixed-ligand complexes of the general composition [VO(L)(A)], where KHL?=?potassium salt of salicylideneglycine, A¹?=?bis(benzylidene)ethylenediamine, A²?=?bis (acetophenone)ethylenediamine, A³?=?di(2-pyridyl)amine, A⁴?=?bis(benzylidene)-1,8-diaminonaphthalene, A⁵?=?thiophene-o-carboxaldene-aniline, A⁶?=?thiophene-o-carboxaldene-p-anisidine, have been synthesized by the interaction of these ligands with vanadyl sulphate. The mixed-ligand complexes have been characterized on the basis of elemental analysis, magnetic measurements, electronic and infrared spectra. An octahedral structure has tentatively been assigned to all of the mixed-ligand complexes. The mixed-ligand complexes show higher toxic activity against the Salmonella typhi, Escherichia coli and Serratia mercescen as compared to the ligands, vanadyl sulphate and control (dimethyl sulphoxide). The mixed-ligand complexes were also tested against a standard drug (tetracycline).     

CFD analysis of the dispersion of toxic materials in road tunnels

The present work is aimed at analyzing the evolution of accidental scenarios deriving from the release of toxic materials inside a tunnel. This scenario, compared to the more frequently investigated cases of fire, followed by smoke dispersion, may involve a large variety of common products characterized by widely differing physical properties; nonetheless it has been analysed in the literature less than expected. The present study compares the dispersion of two common toxic chemicals (chlorine and ammonia), in order to derive some preliminary information about the influence of the physical properties and the release rate. A reference road tunnel geometry is assumed, while the release occurs from ground level, at the centre of one lane and in the middle of the tunnel. Two study cases involving a road tanker, transporting the product as liquefied gas under pressure, were considered: a catastrophic release, from a 220 mm hole, emptying the tanker in a few tens seconds (case A), and a continuous release, from a much smaller hole (15 mm), lasting 5 min (case B). For the sake of simplicity, the release is assumed to be in gaseous phase; the dispersion of the toxic is simulated for the 5 min period following the start of the release using a CFD (Computational Fluid Dynamics) analysis, according to an RANS (Reynolds-Averaged Navier–Stokes) approach with the standard k–ε turbulence model, assuming no ventilation conditions. Structured curvilinear grids with hexaedric cells, refined according to the local concentration gradient, are used. For case A scenarios, especially for the whole release duration, dispersion is mainly governed by the “plug-flow” effect caused by the large volume of toxic entering the tunnel in a rather short time; then, the role of diffusivity and gravity becomes more important. Chlorine, heavier than air and with lower diffusivity than ammonia, progressively accumulates towards the floor; the dispersion of ammonia, which is lighter than air, appears more influenced by diffusivity than by gravity, since a limited stratification is observed. These trends are more evident for case B scenarios, where the toxic flow rates are much lower. It is expected the results will give some useful insight into the dispersion phenomenon within highly confined spaces and maybe also provide some suggestion about ventilation systems design and emergency procedures.     

An approach to estimating the individual risk for toxic-gas releases using the load-resistance model

A new approach to quantify the uncertainty of the individual risk for toxic releases is presented in this paper. The individual risk is defined as the probability of fatality per year. The probability of fatality is calculated by a classical load-resistance model based on reliability (survivability) theory. The load effect is defined as the concentration intensity to which a human is exposed. Furthermore, the resistance is defined as the human tolerance to a certain concentration load in this study. The Monte Carlo method is used to obtain the probability distributions of outputs (the load effect and resistance) propagated from the uncertainties of the input variables. The fatality probability exceeding a limit state can then be obtained by comparing pairs of samples from the load effect and the resistance distributions. The separation of sampling from the load and resistance distributions is also proposed to allow more efficient calculation than that achieved by the classical Monte Carlo method. The analytical risk estimates computed by the load-resistance model are compared to conventional risk estimates that correspond to the upper-end percentile of the load-effect distribution. A case study shows that the conventional risk estimates can be directed to wrong decisions when the load-effect distribution has upper-end tail heaviness.