基于Bishop条分法的多点多向地震动作用下边坡稳定性分析

以人工合成的多点、多向地震加速度时程作为地震动输入,基于Bishop条分法推导了地震边坡稳定安全系数的表达公式。在此基础上,针对某一具体算例,分析了不同地震峰值加速度下的不同坡高边坡稳定安全系数的变化规律,并与单点、单向地震动输入的结果进行了对比。结果表明,对于本文给出的算例,在坡高与地震峰值加速度都相同的条件下,多点、多向地震作用下的边坡安全系数要大于单点、单向作用下的安全系数;当坡高小于30 m、地震峰值加速度小于0.1 g时,多点、多向地震动作用下的边坡安全系数与单点、单向相差不大;当坡高大于30 m、地震峰值加速度大于0.1 g时,多点、多向地震动作用下的边坡安全系数相对单点、单向要小36%以上,此时边坡稳定性评价必须考虑地震动的多点、多向特性。     

电化学还原-氧化工艺降解4-氯酚的毒性研究

采用紫外光还原法制备了Pd-Fe/石墨烯催化阴极,并以Ti/IrO_2/RuO_2为阳极,构成三电极体系(双阴极)和两电极体系(单阴极)的电化学还原-氧化降解工艺,分别对4-氯酚进行降解.采用离子色谱、高效液相色谱、TOC仪对4-氯酚降解过程中中间产物及其浓度进行测定.根据公式计算降解过程中理论计算毒性值,应用发光细菌法测定降解过程中的实际毒性值,对理论计算毒性值与实际毒性值进行比较,分析不同体系下降解过程中毒性的变化规律.结果表明,两种工艺体系在最佳降解条件下,阴极室毒性均呈下降的趋势,由于降解过程中在阳极室生成高毒性的苯醌,阳极室毒性均先升高后降低.通过相关性分析得到,两种体系理论计算毒性与实际毒性在P=0.01水平下,相关性系数均为1,显著相关,表明降解过程中实际毒性的测定结果真实可靠.降解至120 min时,三电极体系毒性小于两电极体系,表明三电极体系优于两电极体系.据此提出实际毒性测定方法在电化学还原-氧化工艺降解氯酚类有机废水毒性测试的工业应用中有着广泛的前景.     

分类收集蔬菜垃圾与植物废弃物混合堆肥工艺实例研究

以分类收集的生活垃圾(主要为蔬菜垃圾)和破碎树枝为原料,采用条垛式堆肥工艺,在中试规模条件下考察了原料初始含水率、通风频率、翻堆频率、接种比例4种因素对混合堆肥效果的影响.同时,在试验的9种工况下,对温度、氧浓度、有机碳降解率、有机碳氮比(C/N)、腐殖质含量等指标进行测定.结果表明,堆肥42d时各堆体均已达到稳定化要求.经过比较肥分保持、腐殖化程度和能量投入等指标,获得的最优堆肥控制条件为:初始含水率65%,通风频率15min/60min(开/关),翻堆频率为每3d1次,产物接种比例5%.最优控制方案下的主发酵通风率仅为0.03L.min-1.kg-1(以VS计),可实现堆肥过程的低能耗,适合于我国村镇区域的应用条件.     

爆炸超压场景下危化品社会风险对允许规划人口密度的影响分析*

为研究危化品重大危险源基于社会风险基准的规划管控影响,采用我国标准规定的定量风险评价方法,TNT当量炸药简化方法,针对最大TNT当量炸药、事故发生总累计频率、人口密度分布控制参数等不同工况条件,对比分析国土开发强度的允许人口密度受社会风险约束影响的变化规律。研究结果表明:人口密度指数分布控制参数Nk与Nb的允许取值随最大TNT当量炸药和事故发生总累计频率降低而提高;确定工况下,允许总人口规模受最大TNT当量炸药影响很小;在最大TNT当量炸药大于100 t或事故发生总累计频率小于1×10-8次/a时可按最大事故场景进行规划控制分析。     

复杂地下空间交通体系连接匝道烟气控制方案研究

复杂地下空间交通体系作为新型地下交通形式,车流量大且存在多个分合流点,气流组织复杂,防灾排烟难度极大。以杭州某复杂地下空间交通体系连接匝道为研究背景,提出匝道通风排烟设计方法,再选取其中二合一式连接匝道结构,采用FLUENT模拟其两种防灾排烟方案的有效性。模拟结果表明：两个连接匝道末端单独设置排烟口的设计方案可有效保证火源下游车辆和火源上游人员的逃生安全;根据分合流流速分配理论模型,在合流处只设置一个排烟口且排烟量提高40 m³/s时,也可达到同样的防灾排烟效果,从土建成本考虑,推荐此方案,为同类型隧道结构提供借鉴。     

A disaster scene simulation system in 3D for oil transmission stations: Design and implementation

The disaster scene in three-dimensional (3D) plays a crucial role in disaster emergency management and risk communication of oil transmission stations. However, existing research for the disaster scene mainly focuses on reproducing the disaster environment and rarely predicts the damage state of the disaster-affected object. This paper proposes an object-oriented modeling method that utilizes a multilevel decomposition pattern for disaster scenes. This method combines earthquake vulnerability assessment with 3D visualization technology to predict and characterize the damage state of critical infrastructure in oil transmission stations. To enhance earthquake risk perception, a simulation system is designed and developed, which allows for the construction of virtual scenes and quick simulation of disaster scenes in 3D. The case application shows that the system improves the 3D modeling efficiency of disaster scenes and enhances public awareness of earthquake risks. The simulation system can provide technical support for seismic mitigation planning and emergency management decision-making at oil transmission stations and has good application prospects.     

A data-driven narratives skeleton pattern recognition from accident reports dataset for human-and-organizational-factors analysis

Accidents in the process industry involve several interacting factors, including human and organizational factors (HOFs). A long-standing obstacle to HOFs analysis is lack of data. Accident reports are an essential data source to learn from the past and contain HOFs-related data, but they are usually unstructured text in a not standardized format. Some studies have explored the extraction of information automatically from accident reports based on Natural Language Processing (NLP) techniques. However, they were not dedicated to HOFs. Risk communication is considered an essential pillar in safety and risk science. This research develops a HOFs-focused risk communication framework based on the NLP techniques that can support risk assessment and mitigation. The proposed approach automatically extracts the target groups oriented “Who, When, Where, Why” (4Ws) information from accident reports.This framework was applied to explore the eMARS database. The results show that the “4Ws” skeleton of narratives has appreciated performance in pattern recognition and holistic information analysis. The graphical representation interfaces are designed to display the features of HOFs-related accidents, which can better be communicated to the sharp-end operators and decision-makers.     

Simulation of scenario characteristics of LPG tank explosion accident and its contribution to emergency planning: A case study

Leakage and explosion of hazardous chemicals during road transportation can cause serious building damage and casualties, and adoption of highly-efficient emergency rescue measures plays a critical role in reducing accidental hazards. Considering a liquefied petroleum gas (LPG) transport tanker explosion accident that occurred in Wenling, Zhejiang Province, China on June 13, 2020 as example, this study proposes a risk assessment framework. This framework recreates the leakage and explosion of the accident process using FLACS v10.9, suggests plans for evacuation, describes the rescue areas of different levels, and explores the influence of environmental factors on the evacuation and rescue areas. The results show that simulated and predicted distributions of fuel vapour cloud concentration and explosion overpressure can provide a reference basis for rapid rescue activities; the characterization of the dynamic effects of wind speed, wind direction, and temperature with respect to the evacuation and rescue areas can be used as theoretical support for on-site adjustment of rescue forces. The role of obstacles can prevent the expansion of the evacuation areas under low wind-speed conditions, and the presence of highly congested obstacles determines the level of the rescue area. The results obtained are important for the risk analysis and the development of emergency rescue measures in case of explosion accidents associated with transportation of hazardous chemicals on high-hazard and high-sensitive road sections.     

淮河流域安徽段水体和沉积物微塑料赋存特征及风险评估

为探究淮河流域安徽段水体与沉积物微塑料赋存特征及生态风险级别,采用野外采样、体式显微镜、扫描电镜、傅里叶红外光谱（FTIR）以及风险指数（H）和污染负荷指数（PLI）模型等方法,分析了流域水体和沉积物微塑料现状,并进行了微塑料生态风险评估.结果表明,流域各点位微塑料检测率为100%,表层水与沉积物微塑料平均丰度分别为（39800±3367） n ·m^-3和（5078±447） n ·kg^-1,下游微塑料平均丰度要高于上游和中游.水体和沉积物微塑料粒径以20~150 μm为主,占比分别为82.96%和80.77%.微塑料形状主要为纤维（水体76.05%、沉积物84.53%）、薄膜（水体21.83%、沉积物15.43%）和碎片（水体2.12%、沉积物0.04%）.水体和沉积物中微塑料主要以透明颜色为主,占比分别为63.31%和83.69%.水体和沉积物主要以聚乙烯（水体65.74%、沉积物80.62%）和聚丙烯（水体18.43%、沉积物9.71%）为主,微塑料主要来源于农业薄膜、废弃渔具渔网和港口人为废弃的塑料袋.微塑料风险指数（H）模型评估表明部分点位风险指数较高,淮河流域安徽段微塑料风险等级为Ⅱ级,污染负荷指数（PLI）模型评估表明流域地表水体和沉积物总体上生态风险较低.     

城市可持续发展环境经济评价及案例

基于城市发展测度演变的分析、明确真实储蓄作为城市可持续发展综合评价指标的经济学含义和政策意义：并针对世界银行在地区真实储蓄测算方法上的不足,重点探讨在真实储蓄测算中如何考虑城市开放性、资源折旧、环境污染损失评估计算的界定问题。文中还以烟台市为试点城市,利用真实储蓄及相关指标评价了该市不同发展时期的可持续发展水平。