油品罐区安全隐患分析及防范

通过对炼油厂油品罐区消防、安全设施进行分析和改进，消除其对罐区的危害；对油罐主体腐蚀及加热器泄漏进行深入分析并提出实用的改进措施；完善生产与安全双重控制系统，为油品罐区标准化改造创造条件。     

暴雨后水库中铁、锰超标成因分析

以福建省某水库为例，对南方地区暴雨后水库中铁锰超标现象从外污染源、地下水、土壤、底质多方面进行了分析，找出了该类型水库中铁、锰超标的原因，并提出建议。     

活性炭性质对其吸附水中硝基苯性能的影响

通过对活性炭进行HNO3氧化及热处理改性,研究了活性炭性质对其吸附硝基苯性能的影响.以低温液氮(N2/77 K)吸附测定活性炭的比表面积和孔容、孔径分布;以Boehm滴定、零电荷点pHPZC的测定及元素分析定量表征活性发表面含氧官能团变化.结果表明:经改性后,活性炭比表面积及总孔容略有减小,表面性质发生较大变化.改性活性炭对硝基苯的吸附容量明显改变,吸附容量大小依次为:AC1′＞AC0′＞AC0＞AC1.经硝酸氧化后,比表面积下降、存在过多表面含氧官能团是导致AC1吸附硝基苯能力降低的主要原因;而AC1'表面适量酚羟基所提供的氢键吸附是其对硝基苯吸附量增加的主要原因.     

金鱼藻对Cu2+的生物吸附特征

研究了沉水植物金鱼藻对Cu2 的吸附动力学及热力学特征.结果表明,金鱼藻对Cu2 的吸附在20min内达到平衡,吸附动力学的实验结果符合伪二级动力学方程,其相关系数达到0.9937,表明该吸附为多种反应同时作用的复杂过程.用Langmuir和Freundlich2种吸附等温式拟合吸附热力学的实验结果表明,以Langmuir模型拟合效果更好,相关系数为0.9977,其最大吸附量为7.79mg/g.在解吸实验中,各浓度组的解吸率均在1%以下,表明金鱼藻对Cu2 的吸持作用较强.     

混凝研究中的界面过程化学:IPF-颗粒物-水溶液的相互作用

仅以IPF 颗粒物 水溶液的相互作用为例 ,对混凝研究中二界面过程化学领域的进展加以介绍 .研究结果表明 ,经过预制的聚合铝在混凝过程中表现出较好的形态稳定性 ,而传统混凝剂则强烈地受溶液化学过程 ,尤其是溶液pH值的影响 .混凝剂水解聚合形态倾向于在颗粒物表面吸附沉积 ,而直接引发混凝作用 .单体形态则通过转化为聚合、沉淀形态起混凝作用     

浅谈水体中硫化物保存、分离和测定方法的选择

水体中的硫化物是环境监测和工厂验收监测的一个重要参数.由于水中硫化物的不稳定性和水体中的干扰物质较多,保存常用技术为醋酸锌-氢氧化钠保存技术,但由于测定的手段不同,可根据不同的测定方法选用不同的保存和分离技术.比色法和碘量法时选用锌盐保存技术,分离技术有吹气分离、负压抽气分离或酸性溶液加锌产生氢气分离,选用不同的吸收液后测量;用间接测定技术时,可选用不同的金属盐进行沉淀后测定金属离子;选用电化学方法测定时,可选用使用于电化学的保存技术.为了准确地测定水体中的硫化物,宜选择最好的保存技术、分离技术和测定方法,并且必须使保存技术和测定方法相匹配,获得完善的监测技术和准确的监测结果.     

A strategic design approach to develop sustainable product service systems: examples taken from the ‘environmentally friendly innovation’ Italian prize

The product service systems’ (PSS) sustainability potential is described in the framework of the new types of stakeholder relationships and/or partnerships, producing new convergence of economic interests, and a potential concomitant systemic resources optimization.In this perspective, it is argued that the design competencies should move towards those of the ‘strategic design’, thus introducing the concept of ‘strategic design for sustainability’: the design of an innovation strategy, shifting the business focus from designing (and selling) physical products only, to designing (and selling) a system of products and services which are jointly capable of fulfilling specific client demands, while re-orienting current unsustainable trends in production and consumption practices.Some examples of PSS are presented and discussed using the PSS categories ‘services providing added value to the product life cycle’, ‘services providing final results to customers’, and ‘services providing enabling platforms for customers’. The cases derive from an analysis of the ‘environmental friendly innovation’ yearly endowed prize submissions. The Politecnico di Milano University together with the Bocconi University and Legambiente (an environmental NGO) promotes the initiative in Italy.     

九龙甸水库水质预测及分析

通过对1996年-2001年间水质监测数据的灰色系统处理,对九龙甸水库水质进了行中长期预测。结果显示九龙甸水库水质在相当长的时期内将保持稳定,能达到规划的地面水Ⅱ类水质功能区要求。     

Climate Change and Energy Technologies

The long time scale of the climate change problem and the inherent nature of the carbon cycle bring important implications for present technology development efforts. Even if major technology improvements are achieved for non-carbon-emitting technologies such as energy-intensity improvements, wind, solar, biomass, and nuclear over the course of the 21^st century, most examinations of potential future greenhouse emissions conclude that additional technology development will be required to stabilize greenhouse gas concentrations. The evelopment of an expanded suite of technologies including carbon capture and disposal, hydrogen systems and biotechnology hold the potential to dramatically reduce the cost of stabilizing greenhouse gas concentrations. This paper examines these technologies in the context of a global integrated assessment model of energy, agriculture, land-use, economics, and carbon cycle processes.     

扩散器近区稀释扩散模型试验研究

通过模型试验，全面研究扩散器的水平方位角、射流角度、长度、环境水深、射流速度等主要设计参数对污水近区稀释扩散的影响。为扩散器设计提供技术支持和参考依据。