钠化改性河南南部膨润土吸附亚甲基蓝性能分析

以河南南部天然钙基膨润土为原料,通过钠化改性得到了钠基膨润土.通过调控吸附剂用量、亚甲基蓝（MB）浓度、吸附时间、溶液pH值和温度,分析对比了天然钙基膨润土（PRT-1）、钙基提纯膨润土（PRT-1T）和钠基膨润土（PRT-1Na）对MB的去除效率.同时,对PRT-1T和PRT-1Na对MB的吸附动力学和吸附机制进行了研究.结果表明,由于PRT-1Na有更大的比表面积、更高的阳离子交换容量和更丰富的羟基结构,表现出对MB更好的吸附效果.在同等吸附条件下,PRT-1Na的吸附效果是PRT-1的4倍,PRT-1T是PRT-1的2倍.在20℃,pH为6,PRT-1Na用量为1.0 g,吸附时间为2 h,MB为500 mL,且初始浓度为500 mg·L^-1时,MB去除率高达99.89%.另外,PRT-1Na对MB染料废水的吸附既存在物理吸附也有化学吸附,Elovich模型对PRT-1T和PRT-1Na吸附MB染料废水的过程拟合度均高,但伪一级动力学模型对PRT-1Na拟合效果最好.     

硫酸盐还原菌对碱性和酸性农田土壤中重金属的钝化效果及其作用机制

通过土壤培养实验考察了硫酸盐还原菌（SRB）包括希瓦氏菌、梭状芽胞杆菌和两者混合菌对碱性和酸性农田土中有效态重金属（Cd、Pb、Cu和Zn）的钝化效果及其作用机制.结果表明,在相同接菌量下,希瓦氏菌处理组对碱性土中有效态重金属的钝化效果优于梭状芽胞杆菌和两者混合菌的处理组;而不同种类的SRB对酸性土中有效态重金属的钝化效果无显著差异.培养第20 d后土壤中有效态重金属的钝化率不再显著变化.SRB处理对碱性土中有效态重金属的钝化率可达80%以上,而对酸性土中有效态重金属的钝化率低于40%.在碱性土中,SRB能够有效还原SO₄^2-,并且提高土壤pH值,使S^2-可与重金属紧密结合,显著提高有效态重金属钝化率.尽管SRB使酸性土壤pH值升高,但土壤仍然呈酸性使SO₄^2-还原受到抑制,不利于有效态重金属的钝化.总体来看,SRB适用于碱性和酸性土壤的重金属污染治理,但与酸性土壤相比,SRB对碱性土壤中有效态重金属的钝化效果更好.     

新型自贸协定的环保议题谈判及我国的对策简

自由贸易协定中纳入环境保护规定是提高自由贸易中的正环境效应,同时避免或减轻负面环境影响的保障,已经逐渐成为新型国际自由贸易谈判中的重要内容。以跨太平洋战略经济伙伴关系协定为代表的新型自由贸易谈判,试图在协定中丰富环境条款,例如环保原则、国际环境公约、环境标准、争端解决机制、环境产业和服务、环境合作和能力建设等。我国也开始在自贸谈判中纳入环保要求,基于最新的政策要求,我国应积极赶上国际自由贸易谈判中环境保护的新要求,推动贸易与环保政策的深度融合。     

航空安全文化运行模式研究

依据安全文化基本原理,对航空安全文化模式进行系统化设计。将安全精神文化、制度文化、行为文化和物态文化4个子系统置于安全文化模式的大系统中,综合分析各子系统之间的互动关系及其对管理模式变革的影响。结合航空安全管理的特点,设计安全文化运行机制的结构框架。通过分析安全文化模式的运行过程和运行功能模块,实现航空安全文化模式的动态管理,使零散的安全文化模式得以系统化。航空安全文化模式的构建为航空运输企业建立了一个程序化、系统化、动态循环的管理过程,并以持续改进的思想指导企业系统地实现其安全目标。     

市场转型对中国环境治理结构的影响——国家污染物减排指标的分配机制研究

国家统计局数据显示,2006年我国节能减排任务均远未实现国家"十一五"规划开局之年的目标,特别是主要污染物排放总量不降反升.本文在分析了中国环境治理体系和国家"十一五"规划主要污染物减排指标分配机制的基础上,研究了市场转型对中国环境治理结构的影响.中国的市场转型可以抽象为以"分权让利"、"市场化"和"工业化"为主要特征的结构演进过程.文中提出,中国市场转型过程对环境治理结构造成了重大影响,而环境治理的各项措施反过来也应与市场转型相适应.当前中国主要污染物减排指标没有实现达标的重要原因是国家污染物减排指标的分配机制无法适应我国市场转型的要求.为此,本文提出一系列国家主要污染物减排指标分配机制的政策建议.     

中国资源安全法律保障与现行关联法律配合协调的现实性

资源安全法律保障关联法律具有基础性、发散性、综合性、社会性等特征，成为资源安全法律保障体系建立的基础。资源安全法律保障与关联法律的配合协调是经济、社会、环境可持续发展的需要．是中国法律实现现代转型的需要．是法律体系建设的需要。同时．这种配合协调具有科学的可行性。     

Mechanisms of changes in population numbers of Caucasian red deer (<Emphasis Type="Italic">Cervus elaphus maral</Emphasis>) in the northwestern Caucasus

Mechanisms of changes in the numbers of red deer in the Caucasian State Biosphere Reserve (the northwestern Caucasus) were studied from 1958 to 2004 using simulation models developed on the basis of concepts concerning the combined effect of density-dependent and density-independent factors. The results show that changes in population numbers are accounted for by larger (more numerous) local subunits, with small groups remaining relatively stable. In the periods of depression, such a mechanism provides for the maintenance of the spatial population structure.     

Validation of a Lagrangian dispersion model implementing different kernel methods for density reconstruction

In this paper the inert version of a Lagrangian particle model named photochemical Lagrangian particle model (PLPM) is described and validated. PLPM implements four density reconstruction algorithms based on the kernel density estimator. All these methods are fully grid-free but they differ each other in considering local or global features of the particles distribution, in treating the Cartesian directions separately or together and in being based on receptors or particles positions in space. Each kernel has been shown to have both advantages and disadvantages, but the overall good performances of the model when compared with the well known Copenhagen and Kincaid data sets are very encouraging in view of its extension to fully chemically active simulations, currently under development.     

Degradation kinetics and mechanism of aniline by heat-assisted persulfate oxidation

Oxidation of aniline by persulfate in aqueous solutions was investigated and the reaction kinetic rates under different temperature, persulfate concentration and pH conditions were examined in batch experiments. The results showed that, the aniline degradation followed pseudo first-order reaction model. Aniline degradation rate increased with increasing temperature or persulfate concentration. In the pH range of 3 to 11, a low aniline degradation rate was obtained at strong acid system (pH 3), while a high degradation rate was achieved at strong alkalinity (pH 11). Maximum aniline degradation occurred at pH 7 when the solution was in a weak level of acid and alkalinity (pH 5, 7 and 9). Produced intermediates during the oxidation process were identified using liquid chromatography-mass spectrometry technology. And nitrobenzene, 4-4’-diaminodiphenyl and 1-hydroxy-1,2-diphenylhydrazine have been identified as the major intermediates of aniline oxidation by persulfate and the degradation mechanism of aniline was also tentatively proposed.     

Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.