Facilitating substance phase‐out through material information systems and improving environmental impacts in the recycling stage of a product

The amount of electrical and electronic products is increasing rapidly, and this inevitably leads to the generation of large quantities of waste from these goods. Some of the generated e‐waste ends up in regions with sub‐standard recycling systems and may be processed under poor conditions. During uncontrolled incineration, halogenated dioxins and furans can be generated from brominated and chlorinated compounds in the products. In order to reduce the health and environmental risks involved in the recycling stage of the life cycle of electronics, an effective design‐for‐environment process must be established during the product development phase. Knowledge of the chemical substances in the product is crucial to being able to make informed decisions. Through full knowledge of the material content of procured components, phase‐outs of unwanted substances, such as halogenated substances, can be performed in an effective manner. Therefore, information is the key to success in phasing‐out substances; facilitating compliance of legal provisions for manufacturers of electrical and electronic devices; and improving the environmental footprint of products as they reach the end of the life cycle. After an introduction to the challenges of electronics waste management, this paper describes supply chain information systems and how they are used to facilitate substance phase‐outs in the electronics industry. Sony Ericsson has been working with phase‐outs of unwanted substances since it was founded in 2001. Through the introduction of a material declaration system that keeps track of all substances in the components used in the company's products, Sony Ericsson has been able to replace unwanted substances to improve environmental impacts at the recycling stage of a product.     

基于微电荷法的烟气颗粒物浓度检测技术及其应用

目前针对烟气颗粒物浓度的检测方法较多,但均存在不足。详细分析了基于微电荷法的烟气颗粒物浓度检测技术的基本原理和关键的技术难点,介绍了由于微处理器、数字电子技术和材料科学等的飞速发展带来的技术革新,技术的进步为其应用开拓了更为广泛的应用领域并逐步在工业场合得到推广。     

不同场地条件下水下隧道周围土体位移变化的数值分析

以拟建的哈尔滨松花江隧道为背景,考虑土体—衬砌的材料非线性特性和相互作用,按平面应变假定,建立在不同场地条件下的若干接近实际的有限元计算模型,应用有限元计算软件ANSYS进行数值分析,得出不同场地条件下隧道周围土体位移的分布规律,遴选出了影响水下隧道周围土体变形的部分关键因素,为合理确定隧道覆土层安全厚度提供了一定的理论依据。     

不同类型农户农地投入的影响因素

农户作为农业生产投入的微观主体,其农地投入行为对农业和农村经济发展影响重大.本文以湖北省江汉平原和鄂北岗地6个县(市、区)的473个农户抽样调查数据,构建逐步回归模型,分析不同类型的农户农地投入行为的影响因素.结果表明:①近年来,农户耕地的投入水平处于上升趋势,国家实施的惠农政策取得了积极成效;②相对于消费型农户而言,利润型农户的总投入水平较离;③目前农户农地投入主要是流动资本投入,固定资本投入较少,农业污染较为严重,农业机械化水平有较大的提升空间;④农户农业生产目标决定其农地投入行为:消费型农户与市场联系不太紧密,依据家庭消费需求进行生产投入决策;利润型农户与市场联系非常紧密,追求利润最大化,按照市场行情进行生产投入决策.⑤不同类型农户农地投入的影响因素存在差异:家庭特征和家庭资源禀赋是影响消费型农户农地投入的主要因素;农业生产要素市场、农产品市场和农业政策是影响利润型农户农地投入的主要因素.     

Engineered nanomaterials in rivers--exposure scenarios for Switzerland at high spatial and temporal resolution

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO₂, nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservative scenario assuming no ENM removal and an optimistic scenario covering complete ENM transformation/deposition were considered. ENM concentrations varied by a factor 5 due to uncertain ENM emissions (15%-85% quantiles of ENM emissions) and up to a factor of 10 due to temporal river flow variations (15%-85% quantiles of flow). The results indicate highly variable local PECs and a location- and time-dependent risk evaluation. Nano-TiO₂ median PECs ranged from 11 to 1′623 ng L⁻¹ (conservative scenario) and from 2 to 1′618 ng L⁻¹ (optimistic scenario). The equivalent values for nano-ZnO and nano-Ag were by factors of 14 and 240 smaller.     

微絮凝-直接过滤工艺用于东江流域典型印染废水回用的实验研究

以东莞地区某典型印染企业尾水为研究对象,针对东江流域饮用水源河流水质污染现状及纳污河流水质改善目标要求与企业对尾水回用的实际需求,进行了印染废水深度处理回用工艺的适用性研究.通过混凝烧杯实验,选用工业PACl、FeSO4、HPAC 3种药剂,对微絮凝-直接过滤集成工艺用于印染废水尾水深度处理后水质回用的可行性,进行了实...     

浅谈对热电企业的环境监督管理

对热电企业的环境监管工作是环保部门的重要职责,根据在对热电企业日常监管中遇到的问题,论述了监管的常用方法,包括监督企业环境管理落实情况、核查企业环保数据真实性及重视群众对企业的监督,并就相关工作展开了具体讨论。     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

燃煤电厂袋式除尘器滤料耐氧化性能试验研究

燃煤电厂锅炉烟气中含有SOx和NOx,会氧化腐蚀滤料。试验研究了燃煤电厂布袋除尘器滤料断裂强力与运行时间的关系。结果表明,滤料在酸性环境中会被氧化同时断裂强力下降,但断裂强力下降后均会出现反弹,后处理工艺可提高滤料的抗氧化性能,但会降低滤料的断裂强力。     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。