A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

油页岩发电项目2×210MW机组除尘器选型

广东粤电油页岩发电项目2×210MW机组CFB锅炉燃用茂名本地油页岩,除尘设备在可研和初步设计时均选用双室5电场高效静电除尘器,在烟气脱硫工程招标文件审查时发现脱硫装置入口烟尘浓度偏高,不能满足烟气脱硫装置要求,故重新对除尘器进行了调研、分析、选型。     

循环半干法脱硫除尘设备布置于两串联引风机之间的工程实践

介绍了宁夏国电大武口发电厂2×110MW机组脱硫、除尘改造系统的配置形式,通过实际工程应用,分析各种因素对该布置形式脱硫、除尘系统的影响,并对出现的问题提出解决办法,为同类改造工程提供参考。     

固态排渣煤粉炉NOx产生浓度影响因素偏相关分析

利用第一次全国污染源普查“火力发电行业产排污系数核算”工作中现场监测得到的数据,首次采用偏相关分析的方法,对固态排渣煤粉炉中机组规模、空气过剩系数、煤中挥发分和发电负荷率等因素对NOx产生浓度的影响进行定性分析,结论：NOx产生浓度与前三种因素存在显著的相关。而与发电负荷率的关系受锅炉是否采用低氮燃烧技术的影响。空气过剩系数越大,煤的挥发分越高,NOx产生浓度越低;采用低氮燃烧装置的锅炉中,机组规模越大,产生的NOx越少,且对于同一锅炉来说,NOx产生浓度随着发电负荷率的升高而增大;未采用燃烧控制的锅炉中,机组规模越大,NOx产生浓度越高,且与发电负荷率不相关。根据分析结果,提出了控制燃煤电厂固态排渣煤粉炉NOx排放的优化措施和建议。     

The contemporary cement cycle of the United States

A country-level stock and flow model for cement, an important construction material, was developed based on a material flow analysis framework. Using this model, the contemporary cement cycle of the United States was constructed by analyzing production, import, and export data for different stages of the cement cycle. The United States currently supplies approximately 80% of its cement consumption through domestic production and the rest is imported. The average annual net addition of in-use new cement stock over the period 2000–2004 was approximately 83 million metric tons and amounts to 2.3 tons per capita of concrete. Nonfuel carbon dioxide emissions (42 million metric tons per year) from the calcination phase of cement manufacture account for 62% of the total 68 million tons per year of cement production residues. The end-of-life cement discards are estimated to be 33 million metric tons per year, of which between 30% and 80% is recycled. A significant portion of the infrastructure in the United States is reaching the end of its useful life and will need to be replaced or rehabilitated; this could require far more cement than might be expected from economic forecasts of demand for cement.     

Pilot sample risk analysis for underground coal mine fires and explosions using MSHA citation data

After three decades of sustained continuous improvement of mine safety performances in the US, mine disasters in 2006 and 2007 compromised an excellent record and presented new challenges and vulnerabilities for the underground coal mining industry. In the aftermath of the incidents, formal investigations and new scrutiny of mine safety by the US Congress and expert study groups followed. The US Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which mandated new laws to address the issues, including those related to mine fires and explosions from which miners must be protected. The National Mining Association-sponsored Mine Safety Technology and Training Commission report highlighted the role of risk analysis and management in identifying and controlling major hazards, such as fires and explosions. In this paper an approach is given for analyzing the risks for fires and explosions based on the Mine Safety and Health Administration citation database. Using 2006 citation data and focusing on subsystem failures, the methodology is applied to a database for a pilot sample of underground coal mines stratified by mine size and state.     

Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

可靠性理论在公共安全领域的应用研究

对公共安全体系从系统可靠性的视角,综合运用可靠性方面的知识,构建公共安全系统混联模型;进而将可靠性分配理论与故障树分析方法相结合,根据系统安全目标的要求,确定混联系统的第一层次各单元事件的可靠性目标值,对构成各单元的各个下属单元采取最小工作量可靠度分配方法,从而建立系统中各单元可靠度再分配量化模型。通过建筑物火灾引起人员伤亡事故实例,详述系统各单元可靠性分配的计算过程。研究表明,可靠性理论可以成功地应用到公共安全领域;使系统在给定的目标值条件下达到系统的安全性优化,实现了公共安全保障效能,减小灾害损失。     

我国商用厨房火灾危险分析及对策研究

烹饪操作特点及食用油燃烧特性决定了商用厨房火灾呈现的特定危害规律,因此必须采用专门规范和技术加以防治。针对我国商用厨房消防安全现状,分析其火灾危险特点,探讨商用厨房消防监管的不足,在研究商用厨房灭火技术发展的基础上,提出加强商用厨房消防安全和健全商用厨房法规体系的对策及建议,建议从主动灭火和被动防火两方面,完善现有的灭火系统和厨具设备消防安全规范,加强商用厨房本质型消防安全,为通风系统和排油烟系统等火灾高发区域的消防安全提供了新手段。     

中美职业安全健康法对比

通过对中美职业安全健康立法目的和背景的考察,对比分析职业安全健康法涉及的6项具体内容,即体例结构、适用范围、监管方式、监管体制、教育与培训、法律责任,并指出国情不同是造成中美职业安全健康法立法巨大差异的原因之一。经对比分析,可得出几点结论:从中国国情出发,走逐步完善的职业安全健康立法路径,建立独立的职业安全健康法律体系,是我国安全生产的治本之策;对从业人员的职业安全健康保护具有首要性,须明晰保护劳动者的上层法律要求,《安全生产法》并不能代替《职业安全健康法》;完善中国职业安全健康法律制度须走一体化整合的道路。