A review of personal care products in the aquatic environment: environmental concentrations and toxicity

Considerable research has been conducted examining occurrence and effects of human use pharmaceuticals in the aquatic environment; however, relatively little research has been conducted examining personal care products although they are found more often and in higher concentrations than pharmaceuticals. Personal care products are continually released into the aquatic environment and are biologically active and persistent. This article examines the acute and chronic toxicity data available for personal care products and highlights areas of concern. Toxicity and environmental data were synergized to develop a preliminary hazard assessment in which only triclosan and triclocarban presented any hazard. However, numerous PCPs including triclosan, paraben preservatives, and UV filters have evidence suggesting endocrine effects in aquatic organisms and thus need to be investigated and incorporated in definitive risk assessments. Additional data pertaining to environmental concentrations of UV filters and parabens, in vivo toxicity data for parabens, and potential for bioaccumulation of PCPs needs to obtained to develop definitive aquatic risk assessments.     

Arrival time and magnitude of airborne fission products from the Fukushima, Japan, reactor incident as measured in Seattle, WA, USA

We report results of air monitoring started due to the recent natural catastrophe on 11 March 2011 in Japan and the severe ensuing damage to the Fukushima Dai-ichi nuclear reactor complex. On 17-18 March 2011, we registered the first arrival of the airborne fission products ¹³¹I, ¹³²I, ¹³²Te, ¹³⁴Cs, and ¹³⁷Cs in Seattle, WA, USA, by identifying their characteristic gamma rays using a germanium detector. We measured the evolution of the activities over a period of 23 days at the end of which the activities had mostly fallen below our detection limit. The highest detected activity from radionuclides attached to particulate matter amounted to 4.4 ± 1.3 mBq m⁻³ of ¹³¹I on 19-20 March.     

End-of-life flows of multiple cycle consumer products

Explicit expressions for the end-of-life flows (EOL) of single and multiple cycle products (MCPs) are presented, including deterministic and stochastic EOL exit. The expressions are given in terms of the physical parameters (maximum lifetime, T, annual cycling frequency, f, number of cycles, N, and early discard or usage loss). EOL flows are also obtained for hi-tech products, which are rapidly renewed and thus may not attain steady state (e.g. electronic products, passenger cars). A ten-step recursive procedure for obtaining the dynamic EOL flow evolution is proposed. Applications of the EOL expressions and the ten-step procedure are given for electric household appliances, industrial machinery, tyres, vehicles and buildings, both for deterministic and stochastic EOL exit, (normal, Weibull and uniform exit distributions). The effect of the physical parameters and the stochastic characteristics on the EOL flow is investigated in the examples: it is shown that the EOL flow profile is determined primarily by the early discard dynamics; it also depends strongly on longevity and cycling frequency: higher lifetime or early discard/loss imply lower dynamic and steady state EOL flows. The stochastic exit shapes the overall EOL dynamic profile: Under symmetric EOL exit distribution, as the variance of the distribution increases (uniform to normal to deterministic) the initial EOL flow rise becomes steeper but the steady state or maximum EOL flow level is lower. The steepest EOL flow profile, featuring the highest steady state or maximum level, as well, corresponds to skew, earlier shifted EOL exit (e.g. Weibull). Since the EOL flow of returned products consists the sink of the reuse/remanufacturing cycle (sink to recycle) the results may be used in closed loop product lifecycle management operations for scheduling and sizing reverse manufacturing and for planning recycle logistics. Decoupling and quantification of both the full age EOL and of the early discard flows is useful, the latter being the target of enacted legislation aiming at increasing reuse.     

Generation and analysis of mixed chlorinated/brominated homologs of the halogenated natural product heptachloro-1'-methyl-1,2'-bipyrrole

The 2,3,3′,4,4′,5,5′-heptachloro-1′-methyl-1,2′-bipyrrole (Q1, MBP-79) and further halogenated 1′-methyl-1,2′-bipyrroles (MBPs) are a class of marine natural products repeatedly detected in seafood and marine mammals from all over the world. Only Q1 is currently commercially available as reference standard and the full synthesis of mixed brominated-chlorinated compound is rather complicated. For this reason, synthetic Q1 (240 mg) was transferred into bromine-containing MBPs by UV-irradiation in the presence of bromine. Bromine, which rapidly vanished from the solutions, was re-newed during the reaction in order to generate higher amounts of Br-containing MBPs. A total of ∼150 mg Q1 was transferred after ∼10 min irradiation with high amounts of Br₂ to give 30.5 mg BrCl₆-MBPs along with lower proportions of Br₂Cl₅-, Br₃Cl₄-, Br₄Cl₃- and traces of Br₅Cl₂-MBPs. Longer UV-irradiation in the presence of Br₂ even allowed for the detection of Br₆Cl-MBPs and traces of Br₇-MBP. However, this reaction also provided some unknown by-products. A sample stored in the dark and later in in-door light (no UV irradiation) also eliminated Q1 after 76 d in favour of heptahalogenated MBPs with up to three bromine substituents. The irradiation products were separated on silica, and fractions containing only Q1 and BrCl₆-MBPs were then further fractionated by non-aqueous RP-HPLC. A pure isolate of the major BrCl₆-MBP (∼1.5 mg) was characterized by GC/MS and ¹³C NMR to be 2-bromo-3,3′,4,4′,5,5′-hexachloro-1-methyl-1,2′-bipyrrole (Br-MBP-75). Partial GC enantioseparation of the axially chiral Br-MBP-75 was achieved on a β-PMCD column. A full enantioseparation was managed by enantioselective HPLC using a NUCLEOCEL DELTA S column. Low amounts of pure BrCl₆-MBP enantiomers could be trapped.     

A new approach to data evaluation in the non-target screening of organic trace substances in water analysis

Non-target screening via high performance liquid chromatography-mass spectrometry (HPLC-MS) has gained increasingly in importance for monitoring organic trace substances in water resources targeted for the production of drinking water. In this article a new approach for evaluating the data from non-target HPLC-MS screening in water is introduced and its advantages are demonstrated using the supply of drinking water as an example. The crucial difference between this and other approaches is the comparison of samples based on compounds (features) determined by their full scan data. In so doing, we take advantage of the temporal, spatial, or process-based relationships among the samples by applying the set operators, UNION, INTERSECT, and COMPLEMENT to the features of each sample. This approach regards all compounds, detectable by the used analytical method. That is the fundamental meaning of non-target screening, which includes all analytical information from the applied technique for further data evaluation. In the given example, in just one step, all detected features (1729) of a landfill leachate sample could be examined for their relevant influences on water purification respectively drinking water. This study shows that 1721 out of 1729 features were not relevant for the water purification. Only eight features could be determined in the untreated water and three of them were found in the final drinking water after ozonation. In so doing, it was possible to identify 1-adamantylamine as contamination of the landfill in the drinking water at a concentration in the range of 20 ng L⁻¹. To support the identification of relevant compounds and their transformation products, the DAIOS database (Database-Assisted Identification of Organic Substances) was used. This database concept includes some functions such as product ion search to increase the efficiency of the database query after the screening. To identify related transformation products the database function “transformation tree” was used.     

Toxicity profile of labile preservative bronopol in water: the role of more persistent and toxic transformation products

Transformation products usually differ in environmental behaviors and toxicological properties from the parent contaminants, and probably cause potential risks to the environment. Toxicity evolution of a labile preservative, bronopol, upon primary aquatic degradation processes was investigated. Bronopol rapidly hydrolyzed in natural waters, and primarily produced more stable 2-bromo-2-nitroethanol (BNE) and bromonitromethane (BNM). Light enhanced degradation of the targeted compounds with water site specific photoactivity. The bond order analysis theoretically revealed that the reversible retroaldol reactions were primary degradation routes for bronopol and BNE. Judging from toxicity assays and the relative pesticide toxicity index, these degradation products (i.e., BNE and BNM), more persistent and higher toxic than the parent, probably accumulated in natural waters and resulted in higher or prolonging adverse impacts. Therefore, these transformation products should be included into the assessment of ecological risks of non-persistent and low toxic chemicals such as the preservative bronopol.     

欧盟电子电器产品生态设计新法中的责任规范研究

当前,快速升级更新的电子电器产品极大地便利和丰富了人们的生活,但随之而来的是数量庞大的电子废弃物,造成严重的资源浪费和环境污染.为解决电子废弃物难题,各国纷纷制定法律和政策形成相应的管理制度,而生态设计逐步成为其中的核心环节.欧盟颁布的电子电器产品生态设计指令将多个主体纳入责任制度框架,体现了科学合理的生产者延伸责任、...     

Monitoring and assessment of radionuclide discharges from Temelín Nuclear Power Plant into the Vltava River (Czech Republic)

The paper summarizes impacts of the Temelín Nuclear Power Plant (NPP) on the Vltava and Labe River basins. The study is based on the results of long-term monitoring carried out before the plant operation (1989–2000), and subsequently during the plant operation (2001–2005). In the first period, the main objective was to determine background radionuclide levels remaining in the environment after global fallout and due to the Chernobyl accident. A decrease in the concentrations of ⁹⁰Sr, ¹³⁴Cs and ¹³⁷Cs, which was observed before the plant operation, continued also during the subsequent period. Apart from tritium, the results of the observation did not indicate any impacts of the plant on the concentrations of activation and fission products in the hydrosphere. The annual average tritium concentrations in the Vltava River were in agreement with predicted values. The maximum annual average tritium concentration (13.5 Bq L⁻¹) was observed in 2004 downstream from the wastewater discharge in the Vltava River at Solenice. Estimated radiation doses for adults due to intakes of river water as drinking water contaminated by tritium are below 0.1 μSv y⁻¹.     

Degradation of anthraquinone dye C.I. Reactive Blue 19 in aqueous solution by ozonation

This study investigated the degradation of anthraquinone reactive dye C.I. Reactive Blue 19 (RB-19) with initial concentration of 100 mg L⁻¹ in aqueous solution by ozone oxidation. The results of UV/VIS and FTIR spectra showed that the anthraquinone structures, nitrogen linkages and amino groups of RB-19 were destroyed under direct ozone reaction. The identification by LC–MS and GC–MS analyses indicated that some organic acids (e.g., phthalic acids) and 1,3-indanone could be the primary degradation products, respectively. The Microtox toxicity of the ozonated RB-19 solution initially increased but subsequently decreased when ozonation time increased. This detoxification accompanied biodegradability enhancement revealed by BOD/COD ratio increasing from 0.15 to 0.33 after 10 min of ozonation.     

In vitro residual anti-bacterial activity of difloxacin, sarafloxacin and their photoproducts after photolysis in water

Fluoroquinolones like difloxacin (DIF) and sarafloxacin (SARA) are adsorbed in soil and enter the aquatic environment wherein they are subjected to photolytic degradation. To evaluate the fate of DIF and SARA, their photolysis was performed in water under stimulated natural sunlight conditions. DIF primarily degrades to SARA. On prolonged photodegradation, seven photoproducts were elucidated by HR-LC-MS/MS, three of which were entirely novel. The residual anti-bacterial activities of DIF, SARA and their photoproducts were studied against a group of pathogenic strains. DIF and SARA revealed potency against both Gram-positive and -negative bacteria. The photoproducts also exhibited varying degrees of efficacies against the tested bacteria. Even without isolating the individual photoproducts, their impact on the aquatic environment could be assessed. Therefore, the present results call for prudence in estimating the fate of these compounds in water and in avoiding emergence of resistance in bacteria caused by the photoproducts of DIF and SARA.