Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K_cpx) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min⁻¹ was drawn. This relationship predicts that CDs with K_cpx < 180 M⁻¹ are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.     

细水雾中雾滴和高温环境的热质交换研究

由雾滴的表面的组分方程和能量方程入手,探讨雾滴在静止的高温环境中的热质交换及生存时间。应用折算薄膜理论,通过特征时间的比较,提出雾滴与高温环境主要通过沸腾机制实现热质交换;考虑滴径与速度变化的耦合作用,应用数值方法研究雾滴在强迫对流环境中与高温环境的热质交换情况。结果表明:对于滴径较小的雾滴不可能达到火焰区或可燃物表面实施火焰冷却和表面冷却,其灭火作用主要依赖于汽化吸热。     

Preparation and Characterization of Cellulose/Polypropylene Composite Using an Oxidatively Degraded Polypropylene

In this work, an oxidatively degraded polypropylene (DgPP) was studied as a novel coupling agent for fibrous cellulose (FC)/polypropylene (PP) composite. An optimal preparation time of PP thermal oxidative degradation was 18 h at 130 °C, and the DgPP had functional groups such as γ-lactone and acid groups. The spherulite observation of the DgPP suggested miscibility for the undegraded PP. The addition of the DgPP presented the transparency improvement of FC/PP composite, and this behavior was found to be originated from the grafted DgPP, which was produced by the esterification reaction between the of FC and the DgPP. The scanning electron microscope (SEM) observation showed that the grafted DgPP coated the FC surface, and the tensile strength of the FC/PP composite increased by an appropriate amount of the DgPP addition. These results suggested that the DgPP was suitable for the coupling agent of FC/PP composite.     

浅谈环境监测社会化的质量监管新思路

分析了现阶段社会环境检测市场的发展现状及存在的问题,探讨了从环境检测上岗能力、专业技能再教育、从业履历和信用等方面对社会环境检测从业人员进行管理的必要性,提出在机构环境监测能力、检测人员结构流动性、仪器设备在用状态和更新频率、从事环境监测业务信用等方面建立评估机制,推动环境监测市场健康发展。     

O／W型乳化液的处理

采用药剂破乳－电解破乳工艺处理Ｏ／Ｗ型乳化液，药剂破乳选用聚合硫酸铁为破乳剂，破乳时最佳ＰＨ为８，聚合硫酸铁的最佳投量为１５００ｍｇ／Ｌ，电解破乳选用铁作阳极，铝作阴极，电流密度０．８６Ａ／ｄｍ＾２，极距２５ｍｍ，电解时间３ｈ。在上述条件下，破乳效果良好，出水清澈透明，ＣＯＤ总去除率可达到９６－９７％。     

CO2和ABC干粉灭火剂扑灭火旋风火焰实验对比分析

为了分析2种灭火剂扑灭火旋风效果,采用实验室自制装置生成稳定的火旋风火焰,喷射CO₂或ABC干粉灭火剂,获取火焰温度场及光电信号数据。研究结果表明:在CO₂灭火剂或ABC干粉灭火剂作用下火旋风火焰温度场呈“下凹”型指数衰减;受灭火剂喷射位置影响,火焰根部、中部及顶端不同区域的灭火剂影响系数不同;基于火焰降温速率和光信号变化,相较于CO₂灭火剂,对火焰起抑制作用的ABC干粉灭火剂降温效率更高、扑灭效果更好。     

石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。     

石墨气体扩散电极的制备与性能优化

电极的制备工艺及参数直接影响电极材料的活性。主要考察了C/PTFE质量比、碾压压力、煅烧温度、造孔剂NH4HCO3及稀土掺杂等因素对电极产出H2O2的影响规律。研究结果表明,电极最佳制备条件为:石墨和PTFE质量比为2∶1、石墨、造孔剂和稀土元素质量比为6∶1∶1、碾压压力10 MPa、煅烧温度330℃。在pH=3、电解质Na2SO4浓度为0.05mol/L条件下,电解2 h后,改性电极产生的H2O2从95 mg/L提高到350 mg/L,提高了268.4%。     

直接投菌法在城市重污染河流治理中的应用研究

在无截污和清除内源的情况下,对深圳市甘坑河采用梅花式接种法将本源微生物菌剂分两次直接接入河流水体及底泥中。结果表明,第1次接种后的4 d内各项水质指标都不稳定,4 d后,悬浮物、COD、TP和NH3-N等浓度下降,水质明显改善;但从第8天开始,COD、NH3-N和TP的去除率同时下降,本源微生物的处理效率开始降低,需进行第2次接种;第2次接种后,DO浓度提升至2.0 mg/L以上,COD、TP和NH3-N的去除率分别保持在40%、30%和40%以上。结果表明,直接投菌法在城市重污染河道治理中可以初步消除河道的黑臭现象,修复水质。     

Chemical oxidation of sulfadiazine by the Fenton process: Kinetics,pathways, toxicity evaluation

This paper investigated sulfadiazine oxidation by the Fenton process under various reaction conditions. The reaction conditions tested in the experiments included the initial pH value of reaction solutions, and the dosages of ferrous ions and hydrogen peroxide. Under the reaction conditions with pH 3, 0.25 mM of ferrous ion and 2 mM of hydrogen peroxide, a removal efficiency of nearly 100% was achieved for sulfadiazine. A series of intermediate products including 4-OH-sulfadiazine/or 5-OH-sulfadiazine, 2-aminopyrimidine, sulfanilamide, formic acid, and oxalic acid were identified. Based on these products, the possible oxidation pathway of sulfadiazine by Fenton's reagent was proposed. The toxicity evaluation of reaction solutions showed increased antimicrobial effects following the Fenton oxidation process. The results from this study suggest that the Fenton oxidation process could remove sulfadiazine, but also increase solution toxicity due to the presence of more toxic products.