下翼缘摩擦式自定心钢框架梁柱节点抗震性能的数值模拟

介绍了一种新型的钢框架梁柱节点形式,其中预应力钢绞线提供了结构在地震作用下的复位功能(自定心),设置在梁端下翼缘的摩擦件则为结构提供了耗能能力;介绍了下翼缘摩擦式自定心钢框架梁柱节点的构造和工作原理,以节点的低周反复加载试验结果为依据,利用面向对象的开放式计算程序OpenSees建立了节点的数值模型,并侧重于模拟节点在...     

Validation of a hybrid life-cycle inventory analysis method

The life-cycle inventory analysis step of a life-cycle assessment (LCA) may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and methods of assessment. Many past LCA studies have used traditional inventory analysis methods, namely process analysis and input-output analysis. More recently, hybrid inventory analysis methods have been developed, combining these two traditional methods in an attempt to minimise their limitations. In light of recent improvements, these hybrid methods need to be compared and validated, as these too have been considered to have several limitations. This paper evaluates a recently developed hybrid inventory analysis method which aims to improve the limitations of previous methods. It was found that the truncation associated with process analysis can be up to 87%, reflecting the considerable shortcomings in the quantity of process data currently available. Capital inputs were found to account for up to 22% of the total inputs to a particular product. These findings suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependent upon data quality and availability. The use of input-output data assists in improving the system boundary completeness of life-cycle inventories. However, the use of input-output analysis alone does not always provide an accurate model for replacing process data. Further improvements in the quantity of process data currently available are needed to increase the reliability of life-cycle inventories.     

Locating ‘power’ in wind power planning processes: the (not so) influential role of local objectors

There have been conflicting accounts of the role and influence of local opposition within planning application outcomes for wind power developments. There is an expanding literature that considers public responses to proposed renewable energy developments and much of this suggests that public opposition is a key factor in the slow growth in renewable energy capacity. However, this paper will show that local opposition groups' power over such planning processes is very limited, and in fact extends only so far as delaying an outcome. Through a thematic content analysis of objection letters to one particular proposed wind power development, the key issues raised in connection with the development will be highlighted. Subsequently, these issues will be compared with those discussed in the official report of the planning appeals process, and it will be shown that the concerns of local objectors had little influence over the eventual verdict.     

毛竹林各组分能量估算模型的研究

在建瓯设置40块毛竹林标准地,分别测定了毛竹单株各部分干重与能量,建立了各部分生物量模型,并在此基础上,运用人工神经网络方法对毛竹林各组分能量进行估测.结果表明毛竹林各组分秆、枝叶和地下部分的平均能量依次为4.23225×10     

苯甲酰苯胺类化合物溶解度和分配系数的测定及定量结构—性质相关研究

本文采用摇瓶法测定了１４各甲酰苯胺类化合物的溶解度及正辛醇／水分配系数,二者之间具有较好的相关性,应用线性溶剂化相关方法获得的相关方程,能更好地预测测苯甲酰苯胺类化合物的的水溶解度和正辛醇／水分配系数。     

软木材料力学行为及其缓冲吸能特性研究进展综述

综述了软木材料的力学行为及其缓冲吸能特性方面的研究进展,首先从密度、含水率、温度、构造与缺陷、服役时间等方面阐述了不同因素对木材力学性能的影响.然后从宏观观测和微细观分析两方面概述了软木材料力学性能试验的研究进展,从宏观本构模型和细观模拟方面阐述了数值仿真分析进展,并简述了理论建模方面的研究成果.最后从多方面给出了未来...     

重复碰撞载荷下加筋板结构的动态响应研究

目的 探究船体加筋板结构在受到重复碰撞载荷作用下塑性变形的累计趋势,分析加筋板主要参数对损伤演化过程的影响,揭示高速、重复冲击下船体加筋结构的变化机理。方法 以一纵三肋加筋板为研究对象,建立基于能量法的刚塑性加筋板动态变形计算方法,以及基于Johnson-Cook本构关系的数值模拟方法,开展不同板架厚度、冲击能量以及冲击尺寸等参数对加筋板变形演化影响的研究。结果 对比分析了理论模型和数值方法,获得了不同参数下的加筋板的结构损伤演化规律。结论 理论解和数值解较为吻合。冲击能量增加后,加筋板的塑性变形量、塑性变形累积速度也随之增加。载荷集中程度越大,对于碰撞边界的破坏效应越大。     

河南省节能环保产业发展对策研究

节能环保产业是跨行业、涵盖面宽的综合性产业,其产业关联度大,带动力强,是国家确定的战略性新兴产业。河南省是新兴工业大省和资源消费大省,经济发展与资源环境承载力之间的矛盾日益突出,发展节能环保产业势在必行。本文分析了河南省节能环保产业的发展现状和存在的突出问题,提出了发展河南省节能环保产业的重点领域和推进路径。     

经济新常态下的“十三五”环境压力预测

我国经济已经从高速增长转向中高速增长的新常态阶段,经济发展方式从规模速度型粗放增长转向质量效率型集约增长,产业结构从劳动密集型向资金密集型和知识密集型转换,经济发展动力从要素驱动、投资驱动转向创新驱动。经济新常态下,环境保护将迎来难得的历史机遇,同时也面临严峻的挑战。为了深入理解和准确把握经济新常态下我国"环境态"的发展特征,本文基于中长期环境经济预测模型定量测算了2020年我国社会经济、能源和水资源以及主要污染物排放趋势和特征。结果表明,"十三五"期间,我国能源和水资源消耗总量增长将趋缓,新增消耗量进入涨幅收窄期;产业转型升级加速将从源头上减轻新增污染减排的压力,主要大气和水污染物排放将进入高位平台期,排放强度将呈现高位回落。     

对秦皇岛市发展生物质能源产业的思考

秦皇岛市具有丰富的生物质能源资源和种植能源作物等发展能源产业的有利条件,应根据各县区的自然条件和生物质资源状况,科学制定生物质能源产业发展规划,并通过推动技术创新与科技进步、加强宣传引导和政策扶持等措施,促进能源产业的快速、健康发展.