Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

基于灾害风险评估的山地城市固定避难场所布局优化研究——以东川区为例

研究以各区域灾害风险评估系数作为权重系数,对山地小城市各区域避难场所进行优化布局。首先,通过风险值=危险性*脆弱性/抗灾救灾能力机理表达式构建灾害风险评估指标体系,并以模糊综合评价法得出灾害风险评估数值,在此基础上通过多目标选址优化模型来构建山地城市避难场所的优化模型,其中灾害风险评估系数作为影响布局的权重因素纳入其中。最后,以东川区为研究对象,对其固定避难场所进行优化布局研究,结果表明:东川区城区固定避灾场所数量可在接近最优解的情况下达到效果最优。     

Fine-resolution mapping of wildfire fuel types for Canada: Fuzzy logic modeling for an Alberta pilot area

The Canadian Forest Fire Danger Rating System (CFFDRS) is used daily across Canada for evaluating forest fire danger. Fuel-type information is one of the inputs required by the models used in the CFFDRS. In this project, three fuel-type maps with a 25 m resolution were produced for a pilot study area located in Alberta using land cover only; land cover and biomass; and, land cover, biomass and leaf area index data derived from satellite imagery. The relationships between inputs and fuel types were determined mainly by the opinions of forest fire scientists and incorporated into a computer program using fuzzy set methodology. Not all the CFFDRS fuel types could be distinguished using these inputs; three of the coniferous types had to be grouped into one common fuel type. Overall accuracy was between 74 and 83% based on ground-truth comparisons. The most accurate map resulted from land cover and biomass data. Detailed accuracy assessment indicated that the overall accuracy increased up to 86% if ambiguous fuel type identification was considered. No combination of inputs was able to define a fuel type with absolute certainty, which is a reflection of differing expert opinions and the small number of inputs used to produce the maps.     

固相微萃取分析条件的优化

主要介绍了固相微萃取作为一种样品前处理技术,如何对影响其分配系数的各因素,如：萃取头的选择、萃取方式、萃取温度等进行优化选择,从而提高方法灵敏度及回收率。     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.     

生物表面活性剂产生菌犁头霉菌(Absidia orchidis)的筛选及发酵条件优化

采用植物油为唯一碳源,设计选择培养基,从饭店下水道污泥中筛选出生物表面活性剂产生菌.结果分离到12株菌,其中一株能使发酵液的表面张力值从68 mN·m-1降低到34.5 mN·m-1,具有开发潜力,被选出作进一步的研究.该菌株经鉴定为犁头霉菌(Absidia orchidis).通过正交试验对犁头霉菌的培养条件进行优化,其优化培养条件为:植物油3.6 g·L-1,KH2PO412.1 g·L-1,Na2HPO45 g·L-1,(NH4)2SO4 1 g·L-1,NaNO32 g·L-1,酵母浸膏0.1 g·L-1,MgSO4·7H2O 0.15 g·L-1,NaCl 5 g·L-1,CaCl2 0.1 g·L-1,EDTA 1 g·L-1,KI 0.83μg·L-1,H3PO4 0.01μg·L-1,CoCl2·6H2O 0.048μg·L-1,MnSO4·H2O 0.312μg·L-1,Na2 MoO4·2H2O 0.048μg·L-1,ZnCl2 0.287μg·L-1,CuSO4·5H2O 0.125μg·L-1,初始pH值8,接种量6%.发酵70h时可获得生物表面活性剂的最大收获量,此时发酵液中生物表面活性剂的相对浓度达402倍.     

城市有机垃圾间歇厌氧消化pH控制动力学研究

对厌氧消化系统的物料及电离平衡进行分析,利用底物降解和微生物生长动力学建立城市有机垃圾间歇厌氧消化pH值控制模型,并研制开发了间歇厌氧消化过程pH值与产气量最优化计算机软件.运用该模型可预测不同厌氧消化过程的最佳pH值,从而通过控制厌氧系统的pH值使系统产气量达到最大,通过2组对比实验验证模型的有效性.结果表明,在相同的实验条件下厌氧系统的pH控制在最佳值时系统产气较未对pH值控制时稳定,且总产气量平均提高20%左右.     

河流水质自动监测站选址适宜性评价

为建立和量化适于河流水质自动监测站选址的评价方法体系,提出了河流水质自动监测站选址一致性、可行性和适宜性评价问题,并建立了选址可行性和适宜性评价2套指标体系。以自动站选址与手工断面位置不一致为前提,利用累乘指数判断选址可行性,在可行的基础上利用模糊综合评价进一步分析选址的适宜性。应用案例显示,罗汉大桥断面水质自动站选址于手工断面下游150 m处是可行的,并且此选址高度适宜,在具有水质代表性的同时兼顾成本和运维管理需求。     

基于GIS的乌梁素海水体富营养化状况的模糊模式识别

利用基于MATLAB 7.0实现的模糊模式识别交叉迭代模型对2006年5—10月分布于乌梁素海各水体功能区的21个水质监测点的富营养化等级进行了模糊模式识别,并在GIS技术支持下,用Arcview的空间分析功能绘制富营养化等级识别结果、对富营养化状态影响权重最大的评价指标总氮(TN)含量和富营养化状态控制元素总磷(TP)含量对应的富营养化等级水体和地表水质等级水体的空间分布月变化Grid专题图.将富营养化状态变化及其分布区域与乌梁素海同期水质监测指标浓度变化及其分布区域进行对比分析及验证.结果表明,富营养化等级识别结果的时空分布与实际情况相符,能够比较准确地反映富营养化等级定量的时空变化趋势.      

基于AHP-熵权法的跨燃气管道现浇梁施工风险评价

为保障某跨燃气管道现浇梁施工安全,建立现浇梁BIM模型进行动态施工模拟,找出影响现浇梁施工的风险因素,从地质条件、外界影响、安全管理3个方面建立了跨燃气管道现浇梁施工风险评价体系;结合"熵"理论和层次分析法综合确定各影响因素权重并对现浇梁施工风险进行模糊综合评价;研究表明:①通过BIM动态模拟,直观全面地识别出施工风险...