汽车污染与控制探讨

通过阐述汽车污染的原理，提出了汽车的防污途径有控制汽车尾气污染的方法。     

30万吨合成氨厂环境噪声综合评价

镇海炼化股份有限公司化肥厂针对装置区噪声污染严重这一现状，积极开展噪声源防治工作经过几年来的噪声综合治理，提高了化肥厂噪声合格率，改善了厂区环境。     

Determination of polychlorinated biphenyl congeners in environmental samples

Ｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｐｏｌｙｃｈｌｏｒｉｎａｔｅｄｂｉｐｈｅｎｙｌｃｏｎｇｅｎｅｒｓｉｎｅｎｖｉｒｏｎｍｅｎｔａｌｓａｍｐｌｅｓ￥ＣｈｕＳｈａｏｇａｎｇ；ＹａｎｇＣｈｕｎ；ＸｕＸｉａｏｂａｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖ...     

京津风沙源区防风固沙功能的时空变化及其区域差异

防风固沙功能是京津风沙源治理成效的关键监测指标。以往研究注重局地防风固沙功能的评估,对全区防风固沙功能的时空变化与内部差异揭示不足。基于京津风沙源区多期遥感数据,采用修正风蚀方程与GIS空间统计技术,评估分析了2000-2015年防风固沙功能的整体变化及其区域差异。结果表明:(1)京津风沙源区年均防风固沙量为28.98亿t,防风固沙能力为68.24 t/hm~2,且均随年份变化波动增加,年均增速分别为1.10%和0.71%;(2)京津风沙源区防风固沙能力呈西北高、东南低趋势,有49.06%的区域防风固沙能力高于70 t/hm~2,评估期内有54%的区域防风固沙能力明显提高;(3)浑善达克沙地亚区、典型草原亚区和荒漠草原亚区的防风固沙量累计为全区防风固沙总量的88%,燕山丘陵山地水源保护亚区和晋北山地丘陵亚区的防风固沙能力提升最显著;(4)锡林郭勒盟、赤峰市和乌兰察布市的防风固沙量合计占全区防风固沙量的77%,朔州市与包头市防风固沙能力较高,北京市与天津市防风固沙能力增速较高。因此,未来应重视分区施策治理与西部和北部防风固沙功能提升。     

气相色谱法测定二硫化碳和甲硫醚

利用气相色谱(配火焰光度检测器,采用3mxφ2mm玻璃填充柱分离)对CS2和甲硫醚(DMS)两种含硫化合物进行了分离检测。该方法具有较高的灵敏度和良好的线性关系。结果表明:该分析对含硫气体的最小检测浓度在mg/m3级,在柱温为70℃,检测器温度为180℃,气化室温度为150℃,氮气流速为50mL/min时,CS2的回收率为98.66%,变异系数为2.12%;甲硫醚的回收率为98.66%,变异系数为1.56%。     

脉冲电晕等离子体脱硫脱氮与除尘技术

脉冲电晕放电是产生等离子体的方法之一，目前已达到工业性试验阶段，该文对脉冲电晕等离子脱硫脱氮与除尘技术的形成过程进行了回顾，对其理论作了分析，并简介了工艺流程，还指出了目前存在的主要问题和需研究的关键技术。     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

浅谈原子吸收分光光度计在环境监测中的应用

本文介绍了原子吸收分光光度计在环境监测中的应用情况和重要性。分析了原子吸收光度法（包括石墨炉法）与ICP-AES（电感偶合等离子体发射光谱法），原子荧光法，极谱法在分析元素时各自的优缺点，又从目前环境监测的角度阐述了应用原子吸收分光度计的重要性与现实性。分析了原子吸收分光广度计在使用中的常见问题及原子吸收分光广度法分析中常出现的问题（从仪器、方法角度分别讲述）。并提出了原子吸收分光度计要进一步应适应环境监测的需求。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

木材工业粉尘污染控制存在的问题与发展趋势

从中国木材工业粉尘污染控制现状存在的问题入手,分析了木材工业企业粉尘污染的原因,提出了控制粉尘污染的措施及发展趋势.保护环境是实现木材工业可持续发展的必然趋势,必须从工艺、技术和装备方面控制生产过程中的粉尘,使作业环境和大气污染排放达到国家环境保护标准和法规的要求.