DISTRIBUTED DISCHARGE OF COOLING WATER ALONG DIRECTION OF STREAM FLOW1

ABSTRACT. A multiple-outfall system for cooling water disposal which is distributed along the direction of stream flow is analyzed. The results provide a simple method of preliminary design of a cooling water discharge outfall system and for a quick extimate of water quality of a polluted stream. It is shown that a properly designed distributed discharge system is capable of preventing serious pollution due to localized discharge of wastes and waste heat; however, the final design of the discharge system should take into account alternative schemes of waste heat disposal and their economic consequences.     

模块化火灾综合评估系统

火灾的综合评估,由于火灾过程的复杂性和人类干预的介入而变得比较困难,本文充分注意到火灾发展的不同阶段和不同过程,以及人类干预的不同侧重点,将火灾综合评估系统分解成五个既相互独立,又相互关系的评估模块,并对这些模块的结构进行了初步的探讨,火灾综合评估系统的模块化设计,有利于不同评估方法的独立发展和火灾综合评估工作的灵活操作。     

涝渍地暗管排水示范工程建设有关问题研究

结合中日专项技术合作四湖项目的具体实践,指出了暗管工程规划中排水调查的内容和重点,就如何评判暗管排水的必要性和确定暗管设计排水量进行了探讨,分析了暗管排水与规划单元排灌系统的关系。排水调查是农田基本建设实施过程中不可缺少的一个环节,就涝渍地治理改造而言,调查的重点是要弄清排水不良的原因和取得解决问题的基础资料。为了制定符合实际的农田排水规划实施方案,可从土壤类型、土壤承载力、降雨后地表积水状况、土壤透水性和地下水位等对规划单元内的农田是否需要暗管排水作出判断。对水田而言,在田面水排除后,领先暗管要排除地表残留水和过剩的土壤重力水,据此决定暗管设计排水量。对于旱田,渗入土壤中以重力水存在的过乘水需要通过暗管排除,据此决定暗管设计排水量。暗管工程适于江河中下游地势低洼、排水不良的农田,当明排不能有效地降低地下水位满足作物生长时,有必要采取暗管排水。     

Testing hypotheses about management to enhance habitat for feeding birds in a freshwater wetland

The level of water was manipulated in a freshwater wetland, with the aim of enhancing abundances of benthic animals and, ultimately, improving habitat for feeding birds (Japanese Snipe, Gallinago hardwickii). We tested whether these actions had the predicted and desired effects on benthic animals, by contrasting changes in two managed locations to one control location which was left unmanipulated. The number of taxa and abundances of chironomids decreased strongly and significantly in the manipulated locations, while the abundance of oligochaetes appeared to vary in a seasonal manner. Temporal variability of the structure and composition of assemblages was also increased in manipulated locations. Such effects have previously been suggested to indicate stress in benthic assemblages. Therefore, in contrast to what was predicted, managerial actions made benthic fauna less abundant and thus, less suitable as habitat for feeding birds. Several general lessons can be learned from these results. (1) Effects of managerial actions like these are difficult to predict a priori and can only be reliably evaluated with an experimental framework. (2) Because abundances of animals vary naturally, evaluations of managerial actions must include appropriate spatial replication. (3) Sampling at hierarchical temporal scales is important, because abundances of animals may vary in an unpredictable manner at short temporal scales and because changes in temporal variability may be a symptom of stress. (4) Combined use of uni- and multivariate techniques provides a comprehensive set of tools to assess the effects of restoration and creation of new habitats. Finally, these results emphasise the need for clear predictions about desired outcomes and specific experimental plans about how to test whether the desired results were achieved, before managerial actions are taken. Although this is often very difficult to achieve in real situations, it is necessary for practices of management to evolve on the basis of sound empirical experience.     

The Interior-to-Edge Breakpoint Distance as a Guideline for Nature Conservation Policy

A method is proposed to quantify disturbance impact on isolated habitats. For every landscape patch, the breakpoint distance, defined as the penetration distance for which equality of interior and edge habitat is observed, can be calculated. Disturbance with equal impact at all patch sides is assumed. Effects of patch compactness, size, convolution, and perforation are discussed. The potential use of the measure for nature reserve design is discussed. The breakpoint distance follows the reserve design guidelines for individual patches, based on island biogeography and is consistent with the form and function principle. A large breakpoint distance is preferred for natural habitats. Small size, small compactness, intense convolution, and the occurrence of many gaps depress the breakpoint distance.     

The Information Cycle as a Framework for Defining Information Goals for Water-Quality Monitoring

/ The necessity to tailor information becomes increasingly urgent as the information revolution continues to generate ever-increasing flows of data and so-called information. From European experiences, a new approach for monitoring system design is suggested in this paper. In this approach, careful and detailed specification of information needs is a major contributing factor to the effectiveness of information products. To develop better specifications for information products, the process of collecting and transforming data into useful information requires careful thought and guidance. A dialogue between information users on one hand and information producers on the other is essential. This dialogue can be based on the information cycle, describing the continuous process from specifying information needs for water management and a strategy to collect information through data collection and data analysis up to utilization of information by water management. By following the respective steps in the information cycle, the process of information gathering can be completed. The cyclic character provides a quantitative means of connecting monitoring system design and operations with the information expectations and/or products required by management.     

西部大开发要加强生态环境保护和建设

在实施西部大开发进程中,对原本生态环境十分脆弱的现状必须予以重视,切实加强生态环境保护与建设。     

可移动充气式应急救护装置的研究

可移动充气式应急救护装置是一种重点针对地铁火灾的新型消防抢险救援装备,主要由风机、风管、救护站及其他辅助设备组成,其工作原理是采用机械通风的方式在救护站内建立正压,阻止外界烟气进入,从而在充满烟气的事故现场建立一个没有烟气的临时安全场所。可用于救助受困人员,方便消防员更换装备和休息调整,以及便于消防部队建立前沿临时指挥点等,为消防部队处置地铁火灾提供了解决问题的新思路和新方法,对提高消防部队在地铁火灾中的抢险救援能力有着重要的作用。除此之外,还可用于其它类型的地下建筑、大空间建筑(如商场)等场所的消防抢险救援。     

基于人因的汽车仪表设计及工效学评价

从仪表设计及工效学问题的典型事故案例分析入手,提出人因化设计的基本理念,给出人机工程学的汽车仪表系统的基本要求及仪表显示装置人因化设计的基本原则、结构体系框图,提出了实现人因化设计的基本思路;探讨了在汽车仪表系统造型设计中如何体现中国元素与特色的途径;构建了汽车仪表设计中工效学评价体系模型。     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.