低温地区市政污水厂工艺选择、设计与运行的探讨

介绍了低温污水的特点和温度变化对污水处理效率的影响 ,指出了选择低温地区污水厂处理工艺时应注意的问题 ,并对设计参数的选择和工程运行管理提出了参考建议。     

建筑物避难安全性能设计在台湾地区的发展

本文介绍建筑物避难安全性能设计在台湾地区的发展情况,包括楼层避难安全验证法和整栋建筑物避难安全验证法。楼层避难安全验证法分为两个阶段,第一阶段先验证起火居室人员的避难安全,第二阶段验证起火居室外整层楼人员的避难安全,并给出一个九步的验证程序和相应的计算公式。整栋建筑物避难安全验证法也分为两个阶段,第一阶段先验证各楼层人员的避难安全,第二阶段验证整栋建筑物人员避难的安全,并给出一个六步的验证程序和相应的计算公式。通过对避难安全验证法的分析,并对各自的验证程序进行了阐述,以便可以据此指导建筑物避难安全的性能设计。     

蓬安城市污水处理工程设计

氧化沟工艺是目前城市生活污水处理的主流工艺之一,利用该工艺处理四川蓬安城市生活污水,出水达到了(GB8978-1996)《污水综合排放标准》的一级标准。本文介绍了该污水处理工程的污水水质及处理标准、处理工艺流程的选择、主要处理构筑物和设备、设计特点及处理效果、主要技术经济指标等,供污水处理工程设计人员参考。     

垃圾站垃圾定量出料系统研究与设计

通过对垃圾站内垃圾出料现状的分析及不同出料方式的比较,确定了垃圾出料口出料系统的设计方案,提出了一种全新的出料方式,解决了垃圾站内垃圾定量出料问题。     

基于响应面法的煤矿钻孔随钻超声成像仪器受力部件优化设计*

摘要:为研制适用于煤矿瓦斯抽采钻孔、满足施工强度要求的小尺寸随钻超声成像仪器，对随钻超声成像仪器的关键受力部位——超声探头安装孔进行优化设计，分析煤矿瓦斯抽采钻孔的一般规格，建立超声探头安装孔的三维模型，确定关键参数类型及其取值范围，采用极差分析法找到对受力部件强度影响较大的参数，基于响应面法开展有限元数值模拟，运用Box-Behnken设计方法得到超声探头安装孔关键参数与仪器受力部件性能指标的关系，优化受力部件关键参数的数值。结果表明:优化前最大的等效应力为138.6 MPa，优化后受力部件最大等效应力较优化前降低9.05%。结论验证了设计方法的有效性，为煤矿抽采钻孔随钻测井仪器的研制提供思路。     

跨高速铁路桥梁基础防护桩设计与施工

武咸城际铁路在咸宁市上跨武广高速铁路,安全风险极大。论述了跨高速铁路桥梁基础承台防护桩的设计和施工,分析了防护桩设计的影响因素,确定了计算桩长。此外,从单桩承载力、桩基内力及基地应力三方面计算进行了安全性验证,确保了桥梁承台施工安全,对类似工程的基础安全防护有较好的借鉴作用。     

Accounting for enforcement costs in the spatial allocation of marine zones

Marine fish stocks are in many cases extracted above sustainable levels, but they may be protected through restricted‐use zoning systems. The effectiveness of these systems typically depends on support from coastal fishing communities. High management costs including those of enforcement may, however, deter fishers from supporting marine management. We incorporated enforcement costs into a spatial optimization model that identified how conservation targets can be met while maximizing fishers’ revenue. Our model identified the optimal allocation of the study area among different zones: no‐take, territorial user rights for fisheries (TURFs), or open access. The analysis demonstrated that enforcing no‐take and TURF zones incurs a cost, but results in higher species abundance by preventing poaching and overfishing. We analyzed how different enforcement scenarios affected fishers’ revenue. Fisher revenue was approximately 50% higher when territorial user rights were enforced than when they were not. The model preferentially allocated area to the enforced‐TURF zone over other zones, demonstrating that the financial benefits of enforcement (derived from higher species abundance) exceeded the costs. These findings were robust to increases in enforcement costs but sensitive to changes in species’ market price. We also found that revenue under the existing zoning regime in the study area was 13–30% lower than under an optimal solution. Our results highlight the importance of accounting for both the benefits and costs of enforcement in marine conservation, particularly when incurred by fishers. Justificación de los Costos de Aplicación en la Asignación Espacial de Zonas Marinas     

Efficient and equitable design of marine protected areas in Fiji through inclusion of stakeholder‐specific objectives in conservation planning

The efficacy of protected areas varies, partly because socioeconomic factors are not sufficiently considered in planning and management. Although integrating socioeconomic factors into systematic conservation planning is increasingly advocated, research is needed to progress from recognition of these factors to incorporating them effectively in spatial prioritization of protected areas. We evaluated 2 key aspects of incorporating socioeconomic factors into spatial prioritization: treatment of socioeconomic factors as costs or objectives and treatment of stakeholders as a single group or multiple groups. Using as a case study the design of a system of no‐take marine protected areas (MPAs) in Kubulau, Fiji, we assessed how these aspects affected the configuration of no‐take MPAs in terms of trade‐offs between biodiversity objectives, fisheries objectives, and equity in catch losses among fisher stakeholder groups. The achievement of fisheries objectives and equity tended to trade‐off concavely with increasing biodiversity objectives, indicating that it is possible to achieve low to mid‐range biodiversity objectives with relatively small losses to fisheries and equity. Importantly, the extent of trade‐offs depended on the method used to incorporate socioeconomic data and was least severe when objectives were set for each fisher stakeholder group explicitly. We found that using different methods to incorporate socioeconomic factors that require similar data and expertise can result in plans with very different impacts on local stakeholders.     

The adoption of green business practices among small US Midwestern manufacturing enterprises

Manufacturers around the world green their businesses for a variety of reasons, including competitiveness, social responsibility, and external stakeholder pressure. However, small and medium enterprises (SMEs) are thought to lag behind larger ones in the adoption of green business practices. This paper explores the motivations for US Midwestern SMEs adopting a variety of green business practices, using a survey of 59 SMEs in the tool and die manufacturing industry. The majority of firms appear to be internally motivated to implement green practices – driven primarily by cost and competitiveness concerns, more than by social responsibility concerns. External coercive pressure from government or customers does not appear to be a significant motivation for these SMEs. However, informal pressure through government incentives and support programs, as well as mimetic pressure through peer learning via industry associations, appear to be more effective in helping these SMEs to further ‘go green.’     

从业人员安全能力评估系统的设计与实验

从业人员的安全能力与岗位要求相匹配对预控事故非常重要,而目前缺乏较为全面评估个体安全能力的方法,为此,结合实验测量法和量表自测法,构建出从业人员安全能力各指标要素的测试方法并完成实验;统计分析各安全能力指标的实验数据,拟合出各要素的数学函数,并建立数据库;设计开发出从业人员安全能力的评估系统,结合样本人员,完成该实验系统的展示。研究成果可用于区别不同安全能力的员工,为不同职业岗位甄选提供了支持。