部分除草剂与重金属混合物对发光菌的毒性

以5种不同类型除草剂和4种重金属为混合物组分,探索混合物毒性变化规律.应用微板毒性分析方法,测定了百草敌、磺草灵、西草净、除草定、环嗪酮、CdCl2·2.5H2O、Ni(NO3)2·6H2O、CoSO4·7H2O和ZnSO4·7H2O对淡水发光菌—青海弧菌Q67(Vibrio qinghaiensis sp.—Q67)的发光抑制毒性.应用非线性最小二乘拟合技术模拟实验剂量-效应数据.结果表明,5种除草剂与4种重金属化合物的剂量-效应曲线(DRC)均可用Weibull函数有效表征.为了全面考察各种不同浓度组成的混合物对Q67的毒性,设计了9个组分同时存在的3个等效应浓度比(EECR)混合物和10个均匀设计浓度比(UDCR)混合物.同样应用微板毒性分析方法测定了各个混合物对Q67的抑制毒性,并应用非线性最小二乘拟合技术模拟了其剂量-效应曲线.通过剂量加和(DA)与独立作用(IA)模型综合分析了各个混合物对发光菌的毒性变化规律.结果表明,不同类型除草剂与多种重金属的各种浓度组合的混合物毒性均可用DA模型进行预测和评估.     

甲醇衍生法测定环境水体中八种酸性除草剂

文章建立了一种测定环境水体中8种酸性除草剂残留量的分析方法。1 000 mL样品在pH<2的情况下由乙醚分三次萃取后,萃取液经脱水,K-D浓缩至约1 mL,转移到衍生瓶中。在衍生瓶中补加2 mL正己烷、1 mL甲醇、8滴浓硫酸,80℃水浴加热1 h,进行甲醇衍生化处理,衍生后的样品运用气相色谱-质谱联用-分段选择离子扫描技术测定,内标法定量。结果表明:8种除草剂在0.05～2.5μg/L范围内线性均良好;方法灵敏度高,检出限均低于或等于0.02μg/L;方法的准确度和精密度高,在0.10、0.50、1.00、1.50μg/L添加水平下所有除草剂的回收率均在82.07%～116.99%之间,相对标准偏差RSD≤7.68%;经实际样品检测,可用于测定环境水体中酸性类除草剂的残留量。     

Phytotoxicity and antioxidative enzymes of green microalga (Desmodesmus subspicatus) and duckweed (Lemna minor) exposed to herbicides MCPA,chloridazon and their mixtures

In this study, we evaluate the toxicity of MCPA (auxin-like growth inhibitor), chloridazon (CHD) (PSII-inhibitor) and their mixtures to floating plants and planktonic algae. Toxicity of MCPA (4-chloro-2-methylphenoxyacetic acid) and CHD (5-amino-4-chloro-2-phenyl-3(2H)-pyridazinone) was first assessed in two growth inhibition tests with Lemna minor (ISO/DIS 20079) and Desmodesmus subspicatus (ISO 8692). Next, herbicide mixtures at concentrations corresponding to the EC values were used to assess their interactive effects, and the biomarkers were: for duckweed fresh weight, frond area, chlorophyll content and number of fronds, and for algae cell count and cell volume. The 3d EC₁₀ and EC₅₀ values using cell counts of D. subspicatus were 142.7 and 529.1 mg/L for MCPA and 1.7 and 5.1 mg/L for CHD. The 7d EC₁₀ and EC₅₀ values using frond number of L. minor amounted to 0.8 and 5.4 mg/L for MCPA and 0.7 and 10.4 mg/L for CHD. Higher sensitivity of reproductive (number of cells/fronds) than growth processes (cell volume/frond area) to herbicides applied individually and in mixtures was especially pronounced in the responses of Desmodesmus. Herbicide interactions were assessed by the two-way ANOVA and Abbott's formula. Generally, an antagonistic interaction with Lemna was revealed by MCPA and chloridazon, whereas additive effect of both herbicides was observed for Desmodesmus. A significant stimulation of SOD and APX activity by binary mixtures was noted in algal cells mainly after 24 and 48 hours of exposure. The extremely high stimulation of the activity of both enzymes was induced by the combination EC₁₀CHD + EC₅₀MCPA (48 h). Presumably due to oxidative stress, the treatment with CHD at concentration EC₅₀ after 72h was lethal for algae grown in aerated cultures, in contrast to standardized test conditions. Taking into account the consequences of risk assessment for herbicide mixtures we can state that a relatively low toxicity, as well as the lack of significant synergy between MCPA and CHD to non-target plants appears to be the most important result.     

Host-guest complexes of phenoxy alkyl acid herbicides and cyclodextrins. MCPA and β-cyclodextrin

The chlorophenoxy herbicide MCPA (4-chloro-2-methylphenoxyacetic acid), widely used for the control of broad-leaf weeds primarily in cereal and grass seed crops, still remains one of the most often used herbicides in Portugal. As the formation of inclusion complexes with cyclodextrins can improve its solubility properties, the interaction between the herbicide MCPA and β-cyclodextrin was investigated. The stability constants describing the extent of formation of the complexes have been determined by phase-solubility studies. Different analytical techniques [ultraviolet-visible spectroscopy (UV-Vis), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR)] were employed for a thorough investigation of the structural characteristics of the obtained complexes, which exhibited distinct features and properties from both “guest” and “host” molecules. FTIR and ¹H NMR data obtained for the MCPA/β-CD complexes gave information about the interaction between MCPA and the nonpolar cyclodextrin cavity. The dramatic change observed in band frequency and proton displacements of OCH₂ group and H6 aromatic proton confirmed the inclusion of MCPA in β-CD.

The formation of an inclusion complex between MCPA and β-CD increased the aqueous solubility of this herbicide which could be a particularly advantageous property for some specific applications, namely to improve commercial formulation and for environmental protection.     

QSPR for prediction of subcooled vapor pressures (log PL) of polychlorinated trans-azobenzenes

In this study the values of subcooled vapor pressures (log P_L) were estimated for 209 trans chloroazobenzenes (Ct-ABs) that fill some gaps in analytical and experimental data on these compounds. There are 209 chloro derivatives of trans azobenzenes that are relatively stable and more environmentally relevant than 209 chloro cis congeners. The calculations models were based on the Quantitative Structure-Property Relationship (QSPR) scheme using the semi-empirical method (PM6) in molecular package (MOPAC) software and density functional theory (DFT) method using B3LYP functional and 6-311++G** basis set) in Gaussian 03 software method and the artificial neural networks (ANNs) prediction. The values of log P_L predicted by models used varied between ?3.94 to ?2.66 for Mono-; ?4.85 to ?2.97 for Di-; ?5.18 to ?3.17 for Tri-; ?6.02 to ?3.77 for Tetra-; ?6.64 to ?4.64 for Penta-; ?7.36 to ?4.76 for Hexa-; ?7.54 to ?5.79 for Hepta-; ?7.75 to ?6.64 for Octa-; ?7.89 to ?7.44 for Nona-Ct-Abs; and ?8.09 and ?8.13 for Deca-Ct-AB. Based on these values Ct-ABs can be grouped localized among relatively low (log P_L ?4 to ?2) and low (log P_L < ?4) mobile Persistent Organic Pollutants (POPs). Both the calculation methods employed were characterized by similar prediction ability of subcooled vapor pressure values of Ct-ABs, while those of PM6 are much more efficient due to a cheaper hardware used and around 300-fold less time spent on calculations.     

Respiration induced by substrate and bacteria diversity after application of diuron,hexazinone, and sulfometuron-methyl alone and in mixture

Abstract

After application, herbicides often reach the soil and affect non-target soil microorganisms, decreasing their population, diversity or affecting metabolic activity. Therefore, laboratory studies were performed to evaluate the effects of diuron, hexazinone and sulfometuron-methyl alone and mixed upon carbon transformation by soil microorganisms in clayey and sandy soils and the effect on bacterial diversity and structure. Control treatment without herbicide application was also performed. Sub-samples from the control and herbicide treatments (10?g – in triplicate) were collected before herbicide application and 7, 14, 28 and 42?days after treatment (DAT), then 1?mL of ¹⁴C-glucose solution was applied. The released ¹⁴CO₂ was trapped in 2?M NaOH solution and the radioactivity was analyzed by liquid scintillation counting (LSC), 12?h after glucose application. The effect of herbicides on bacterial diversity was evaluated by T-RFLP. The experiment was conducted in a complete randomized design. Hexazinone did not affect ¹⁴CO₂ evolution. Diuron showed a greater ¹⁴CO₂ evolution in sandy and clayey soil, while sulfometuron-methyl led to an increase in sandy soil, at 42 DAT. A greater evolution of carbon was observed in the treatment with herbicide mixture in sandy soil, compared with the same treatment in clayey soil or control. However, the herbicide mixture application did not affect the soil biological activity measured by the respiration rate induced by substrate. On the other hand, the herbicide mixtures affected the bacterial diversity in both soils, being the strongest effect to diuron and sulfometuron-methyl in clayey soil and hexazinone in sandy soil.     

Phenylurea herbicide sorption to biochars and agricultural soil

Biochar is increasingly been used as a soil amendment to improve water-holding capacity, reduce nutrient leaching, increase soil pH, and also as a means to reduce contamination through sorption of heavy metals or organic pollutants. The sorption behavior of three phenylurea herbicides (monuron, diuron and linuron) on five biochars (Enhanced Biochar, Hog Waste, Turkey Litter, Walnut Shell and Wood Feedstock) and an agricultural soil (Yolo silt loam) was investigated using a batch equilibration method. Sorption isotherms of herbicides to biochars were well described by the Freundlich model (R² = 0.93–0.97). The adsorption K_F values ranged from 6.94 to 1306.95 mg kg^?1 and indicated the sorption of herbicides in the biochars and Yolo soil was in the sequence of linuron > diuron > monuron and walnut shell biochar > wood feedstock biochar > turkey litter biochar > enhanced biochar > hog waste biochar > Yolo soil. These data show that sorption of herbicides to biochar can have both positive (reduced off-site transport) and negative (reduced herbicide efficacy) implications and specific biochar properties, such as H/C ratio and surface area, should be considered together with soil type, agriculture chemical and climate condition in biochar application to agricultural soil to optimize the system for both agricultural and environmental benefits.     

Enzyme-immunoassay techniques for the detection of atrazine in water samples: Evaluation of a commercial tube based assay

Environmental immunoassays can help lower the operating costs and improve the effectiveness of residue laboratories. The present study assesses the ability of a commercially available enzyme immunoassay (EIA) to detect triazine herbicides in water. The tube based EIA could detect atrazine in lake and river water with detection limits of 62 pg/mL and 180 pg/mL respectively. The assay's ability to quantify atrazine in a set of 124 water samples taken from many parts of Canada was compared with a reference method that used gas chromatographic separation combined with a nitrogen phosphorous detector (GC-NPD) (R=0.919). A 71 % reduction in analytical load was achieved at a threshold concentration of 1 ng/mL. There were 2.4 % false negative and 0.8 % false positive results associated with that load reduction. The variability of the assay control parameters was generally within two standard deviations of the mean response for 65 assays. The EIA for atrazine is recommended for use as a screening technique and as an inexpensive way to monitor triazine levels in waters that are known to be contaminated with those herbicides.