污泥龄对A2/O悬浮填料生物膜工艺反硝化除磷影响

按照20%的投配比向好氧池中投加悬浮式填料,将传统A2/O 工艺转变为A2/O复合式生物膜工艺.以实际市政污水为处理对象,考察了如何强化反硝化除磷效果的方法.结果表明,通过改变污泥龄从而适当的增加装置中污泥浓度可以有效的提高缺氧区反硝化除磷的效果,当SRT=Bd时,装置总体的处理效果最好.COD,总氮,氨氮和总磷的去除...     

复合式膜生物反应器处理城市污水及回用的特性研究

在以复合式膜生物反应器系统为基础,以模拟城市污水为处理对象。通过运行条件优化研究,系统获得了良好的出水水质,出水中SS、浊度及色度均未检出;出水中有机污染物和N、P的平均浓度分别为COD≤16.32 mg/L、BOD5≤3.45mg/L、NH3-N≤0.75 mg/L、TN≤10.13 mg/L、TP≤1.08 mg/L,其相应的平均去除率分别为≥95.58%、≥98.91%、≥97.19%、≥71.71%、≥71.31%,各项水质指标的去除率明显高于传统生物处理工艺。优良的出水完全能满足城市生活杂用对水质的要求。     

生物膜复合系统脱氮除磷的特征及微生物群落结构分析

试验研究了序批式生物膜复合系统在不同有机负荷下氮磷等营养物质的去除特性.结果表明,复合系统在COD负荷为0.35kg.kg-1.d-1(以MLSS计)时能够很好解决脱氮除磷的泥龄矛盾,TP、TN、NH4+-N去除率分别能达到96%、89%和96%,高于对照组的SBR工艺.复合系统中,悬浮污泥对硝化起主要作用,悬浮态污泥和生物膜的硝化平均贡献比为1.66;附着态生物膜对反硝化和除磷起主要作用,生物膜和悬浮态污泥的反硝化贡献比为2.19,释磷贡献比为3.5,摄磷贡献比为3.76.利用PCR-DGGE技术发现,复合系统中存在丰富的脱氮功能菌和除磷功能菌,且悬浮态与附着态微生物的相似性仅为73%,区别较大,说明两者存在一定的分工协作,与反应器的处理特性相一致.     

Economic feasibility of autonomous hybrid wind–diesel power systems for residential loads in hot regions: a step to mitigate the implications of fossil fuel depletion

Today, energy occupies a pivotal position around which all socio-economic activities revolve. No energy means no life, and supply of energy in a cheap, plentiful, long-sustainable and environmentally safe form is a boon for everyone. In the light of rising cost of oil and fears of its exhaustion coupled with increased pollution, the governments worldwide are deliberating and making huge strides to promote renewable energy sources such as wind. Integration of wind machines with the diesel plants is pursued widely to reduce dependence on fossil-fuel-produced energy and to reduce the release of carbon gases that cause global climate change. The literature indicates that commercial/residential buildings in the Kingdom of Saudi Arabia (KSA) consume an estimated 10–40% of the total electric energy generated. The aim of this study is to analyse wind-speed data of Dhahran (East-Coast, KSA) to assess the economic feasibility of utilising autonomous hybrid wind–diesel power systems to meet the electrical load of 100 typical residential buildings (with annual electrical energy demand of 3512 MWh). The monthly average wind speeds range from 3.3 to 5.6 m/s. The hybrid systems simulated consist of different combinations of 600 kW commercial wind machines supplemented with diesel generators. The National Renewable Energy Laboratory's hybrid optimisation model for electric renewables software was employed to perform the techno-economic analysis.

The simulation results indicate that for a hybrid system comprising 600 kW wind capacity together with a 1.0 MW diesel system (two 500 kW units), the wind penetration (at 50 m hub-height, with 0% annual capacity shortage) is 26%. The cost of generating energy (COE, $/kWh) from this hybrid wind–diesel system was found to be 0.070 $/kWh (assuming diesel fuel price of 0.1 $/l). The study exhibits that for a given hybrid configuration, the number of operational hours of diesel generator sets (gensets) decreases with an increase in the wind-farm capacity. Concurrently, emphasis has also been placed on wind penetration, un-met load, effect of hub-height on energy production and COE, excess electricity generation, percentage fuel savings and reduction in carbon emissions (relative to diesel-only situation) of different hybrid systems, cost breakdown of wind–diesel systems, COE of different hybrid systems, etc.     

System dynamics modelling of hybrid renewable energy systems and combined heating and power generator

The role of energy in the present world is critical in terms of both economical development and environmental impact. Renewable energy sources are considered essential in addressing these challenges. As a result, a growing number of organisations have been adopting hybrid renewable energy system (HRES) to reduce their environmental impact and sometimes take advantage of various incentives. When a HRES is being planned, the ability to model a HRES can provide an organisation with numerous benefits including the capability of optimising sub-systems, predicting performances and carrying out sensitivity analysis. In this paper, we present a comprehensive system dynamics model of HRES and combined heating and power (CHP) generator. Data from a manufacturing company using HRES and CHP generator are used to validate the model and discuss important findings. The results illustrate that the components of a HRES can have conflicting effects on cost and environmental benefits; thus, there is a need for an organisation to make trade-off decisions. The model can be a platform to further simulate and study the composition and operating strategies of organisations that are venturing to adopt new or additional HRESs.     

Energy and exergy analysis of a solid-oxide fuel cell power generation system for an aerial vehicle (ISSA- 2015–139)

This paper presents the performance of the solid-oxide fuel cell/gas turbine hybrid power generation system with heat recovery waste unit based on the energy and exergy analyses. The effect of air inlet temperature and air/fuel ratio on exergy destruction and network output is determined. For the numerical calculations, air inlet temperature and air fuel ratio are increased from 273 to 373 K and from 40 to 60, respectively. The results of the numerical calculations bring out that total exergy destruction quantity increases with the increase of air inlet temperature and air/fuel ratio. Furthermore, the maximum system overall first and second law efficiencies are obtained in the cases of air inlet temperature and air/fuel ratio equal to 273 K and 60, respectively, and these values are 62.09% and 54.91%.     

Hybrid economy research in remote Indigenous Australia: seeing and supporting the customary in community food economies

Hybrid economy research in remote Indigenous Australia is what Gibson-Graham [2008. Diverse economies: performative practices for “other worlds”. Progress in Human Geography, 32 (5), 613–632] describe as a performative ontological project. This research seeks to address the marginalisation of customary economic activities that contribute to the well-being of Indigenous Australians. It aims to make the customary sector more real, more credible and more viable as an object of policy and activism, challenging the dual dominance of the state and the market as the focus of development (cf. Gibson-Graham 2008 Gibson-Graham, J. K. 2008. Diverse economies: performative practices for “other worlds”. Progress in Human Geography, 32(5), 613–632. doi: 10.1177/0309132508090821[Crossref], [Web of Science ®] , [Google Scholar]). This paper outlines how hybrid economy research has sought to broaden views of the economic landscape in remote Indigenous Australia amid the withdrawal of key policy and programmatic support by the Australian Government. This research draws on Canadian national surveys of Indigenous peoples, harvest studies and programmatic support for customary harvest – hunting, fishing and gathering of bush foods – to identify ways in which the Australian Government might better see and support Indigenous community food economies.     

两种复合人工湿地系统对东莞运河污水的净化效果

复合人工湿地系统是将不同类型的人工湿地相组合,充分发挥各类型湿地特长,实现优势瓦补的一种更有效的污水净化系统.研究采用复合垂直流-水平潜流人工湿地和复合垂直下行流人工湿地两种复合人工湿地系统对东莞运河的河道污水进行处理,分别监测了两套不同复合人工湿地系统第一、二级湿地单元的出水情况,研究了不同时间段和一定的水力负荷下复合人工湿地系统对河道污水的净化效果.结果表明,两种复合人工湿地系统的二级湿地单元出水各指标明显优于一级湿地单元,复合垂直流-水平潜流湿地对东莞运河污水COD、BOD_5和TP的平均去除率分别达到70.52%、69.21%和55.56%;复合垂直下行流湿地系统对TP的净化尤其突出,平均去除率达到72.62%,二级出水的质量浓度在0.10～0.60 mg·L~(-1)之间,对COD和BOD_5的平均去除率分别为64.74%和60.63%.两种复合系统的出水浓度均达到<城市污水处理厂污染物排放标准>(GB 18918-2002)中的一级标准.由此可见,两种复合人工湿地系统对各污染物去除效果明显优于单一的湿地系统,且更具稳定性和耐冲击能力.     

毛白杨杂种无性系稳定碳同位素值的特征及其水分利用效率

2008年在北京林业大学对9个毛白杨(Populus tomentosa)杂种无性系苗木生长不同时期的叶片、小枝、根的碳同位素δ~(13)C和瞬时水分利用效率WUEi的差异进行研究,分析不同无性系间δ~(13)C与瞬时水分利用效率WUEi的相互关系,目的在于探求δ~(13)C在筛选高水分利用效率毛白杨杂种无性系中的应用价值.结果表明:不同生长时期叶片δ~(13)C值表现为7月<8月<10月<9月,小枝δ~(13)C值表现为8月<9月<10月,叶片δ~(13)C值、小枝δ~(13)C值在不同时期和不同无性系间的差异均达显著水平,无性系间的差异是引起δ~(13)C值变化的主要因素.不同部位碳同位素比值表现为叶片<小枝<根,毛白杨杂种无性系δ~(13)C值在不同部位和无性系间差异均达显著水平,部位间的差异是引起δ~(13)C值变化的主要因素.δ~(13)C值较高的无性系30、83、BL5的WUEi也较高,δ~(13)C值较低的无性系42、26、BT17的WUEi也较低,且不同时期δ~(13)C和WUEi呈较强的正相关,相关系数分别为0.766、0.872、0.675,高δ~(13)C可以作为筛选高WUEi毛白杨的有效指标,且在苗木生长旺盛时期选育能得到更为可靠的结果.     

HABR系统实现固相异养与单质硫自养集成反硝化试验

采用连续流运行方式,将含NO₃--N的原水依次通过HABR(复合式厌氧折流板反应器)内添加木屑(第1系统)和硫磺颗粒(第2系统)的2个系统,在温度为(25±1)℃的条件下,将NO₃--N容积负荷由72g/(m3·d)逐渐提高至80和96g/(m3·d),在不需投加传统型外加碳源的条件下实现了固相异养与单质硫自养的集成反硝化. 结果表明:进水NO₃--N容积负荷为96g/(m3·d)时,系统NO₃--N总去除率达到99.0％,第1系统和第2系统对NO₃--N的去除率贡献各为50.0％;系统出水ρ(COD_Mn)为5.74～10.05mg/L,ρ(SO₄2-)为405～870mg/L,并且没有NH₄+-N和NO₂--N的积累. 第1系统产生的碱度能部分中和第2系统内产生的酸,进水、第1系统、第2系统出水pH分别为7.5、7.5～7.6、6.5～7.2,使硫自养反硝化系统呈现出较强的pH平衡能力,不需外加石灰石调节碱度即可为反硝化细菌提供较适宜的中性生存环境. 系统在pH平衡能力和NO₃--N去除效果2个方面均表现出良好的协同作用,并且通过集成反硝化作用弥补了2个系统单独运行时反硝化过程效率低的缺点,较传统异养型生物反硝化降低了运行成本.