Diurnal and spatial variations of soil NOx fluxes in the northern steppe of China

NO_x emissions from biogenic sources in soils play a significant role in the gaseous loss of soil nitrogen and consequent changes in tropospheric chemistry. In order to investigate the characteristics of NO_x fluxes and factors influencing these fluxes in degraded sandy grasslands in northern China, diurnal and spatial variations of NO_x fluxes were measured in situ. A dynamic flux chamber method was used at eight sites with various vegetation coverages and soil types in the northern steppe of China in the summer season of 2010. Fluxes of NO_x from soils with plant covers were generally higher than those in the corresponding bare vegetation-free soils, indicating that the canopy plays an important role in the exchange of NO_x between soil and air. The fluxes of NO_x increased in the daytime, and decreased during the nighttime, with peak emissions occurring between 12:00 and 14:00. The results of multiple linear regression analysis indicated that the diurnal variation of NO_x fluxes was positively correlated with soil temperature (P < 0.05) and negatively with soil moisture content (P < 0.05). Based on measurement over a season, the overall variation in NO_x flux was lower than that of soil nitrogen contents, suggesting that the gaseous loss of N fromthe grasslands of northern China was not a significant contributor to the high C/N in the northern steppe of China. The concentration of NO_x emitted from soils in the region did not exceed the 1-hr National Ambient Air Quality Standard (0.25 mg/m³).     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.     

长江河口潮区界溶解态无机氮磷的通量

利用长江河口潮区界大通站的水质资料探讨了溶解态无机氮、磷浓度和通量的变化。结果表明：NO3^-,NH4^ ,DIN的浓度随季节变化不明显，而NO2^-,PO4^3-的浓度是枯季较高、洪季较低：1963－1984年间，NO3^-,NO2^-,NH4^ 、DIN和PO4^3-的年平均浓度分别为17．1、0．43、7．1、24．7、0．19μmol/L，平均通量分别为33．1、0．51、3．67、10．5和0．54kg/s，平均年通量分别为104.44,1.61,11.56,33.1和1.70万t；溶解态无机氮、磷的通量由于受到流量的影响而在年内分配不均匀，其中NO3^-,NO^-,NH4^ DIN和PO4^3-在洪季的通量分别为全年的72．9％，58．1％、69．2％、71％和68．3％；NO3^-,NO2^-，DIN年通量的总变化趋势是稳步上升，且与氮肥使用量成高度显著的正线性相关。1998年，NO3^-,NO2^-,NH4^ 和PO4^3-的年通量分别为477．3，1．356、3．097和2．296万t。     

Life cycle assessment analysis of active and passive acid mine drainage treatment technologies

Acid mine drainage (AMD), resulting from open-cast coal mining, is currently one of the largest environmental challenges facing the mining industry. In this study, a life cycle assessment (LCA) was conducted to evaluate the environmental impacts associated with the construction, operation and maintenance of different AMD treatment options typically employed. LCA is a well-reported tool but is not documented for AMD treatment systems despite their ubiquitous implementation worldwide. This study conducted detailed LCA analysis for various passive and active AMD treatment approaches implemented or considered at a major coal mine in New Zealand using a comparative functional unit of kg acidity removed per day for each treatment option. Eight treatment scenarios were assessed including active limestone and hydrated lime treatments, and compared to passive treatments using limestone and waste materials such as mussel shells. Both midpoint and endpoint LCA impact categories were assessed. Generally, the active treatment scenarios demonstrated greater LCA impacts compared to an equivalent level of treatment for the passive treatment approaches. Lime slaking had the greatest LCA impacts, while passive treatment approaches incurred consistently less impacts except for one passive treatment with a purchased energy scenario. A 50% reduction in transportation distances resulted in the lowest LCA impacts for all scenarios. This study highlights the importance of evaluating the environmental and social impacts of AMD treatment for the mining industry.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

基于GB/T 29309标准的HALT测试技术分析

本文以标准GB/T 29309-2012为基础,以某款开关电源为例,对HALT试验设备、工作极限与破坏极限、试验步骤及设备运行中注意点等方面展开介绍,为电子产品可靠性测试提供相关探讨。     

A Cumulative Energy Demand indicator (CED), life cycle based,for industrial waste management decision making

Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications.In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented.One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making.The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.     

Domestic or imported? An assessment of carbon footprints and sustainability of seafood consumed in Australia

The distance between where food is produced and consumed is increasing, and is often taken as evidence of an unsustainable global food system. Seafood is a highly traded commodity yet seafood sustainability assessments do not typically consider the impacts of the movement of products beyond the fishery or farm. Here we use life cycle assessment to examine the carbon footprint of the production and distribution of select seafood products that are consumed in Australia and determine differences in the sustainability of imports and their domestically produced counterparts. We found that the distance food is transported is not the main determinant of food sustainability. Despite the increased distance between production and consumption, carbon footprints of meals from imported seafood are similar to meals consisting of domestically produced seafood, and sometimes lower, depending on the seafood consumed. In combining LCA with existing seafood sustainability criteria the trade-offs between sustainability targets become more apparent. Carbon ‘footprinting’ is one metric that can be incorporated in assessments of sustainability, thereby demonstrating a broader perspective of the environmental cost of food production and consumption.     

制定粉尘卫生标准的新趋势——介绍欧洲的经验并提出几点建议

介绍了近年来欧洲国家新的粉尘卫生标准及其监测、管理方法,分析其制定粉尘卫生标准的经验,并与我国的粉尘卫生标准情况做了初步的比较,提出了建立我国新分级分类粉尘卫生标准体系的建议。     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.