七星河湿地氨氧化古菌多样性和丰度及其与环境因子的相关性分析

以典型东北寒温带沼泽湿地——七星河湿地中芦苇和小叶樟植被下不同深度土壤中氨氧化古菌(Ammonia-Oxidizing Archaea,AOA)为研究对象,以编码氨氧化作用关键酶——氨单加氧酶(AMO)的amo A基因为分子标记,通过构建克隆文库和生物信息学方法分析数据,考察了不同植被环境中AOA多样性和丰度的垂直分布规律,及其与环境因子的相关性.研究结果表明,小叶樟植被土壤中AOA amo A基因多样性显著高于芦苇植被土壤中amo A基因多样性,芦苇植被土壤中AOA amo A基因多样性在深度为40~60 cm土层中最高,AOA多样性与NH+4-N、NO-3-N含量呈正相关;小叶樟植被土壤中AOA amo A基因多样性在深度为20~40 cm土层中最高,AOA多样性与NH+4-N、NO-3-N含量呈正相关.芦苇植被土壤中AOA丰度最低值出现于0~20 cm土层中,到20~40 cm土层中出现最高值,随着深度增加AOA丰度下降,AOA丰度则与NO-2-N含量呈正相关.小叶樟植被土壤中AOA丰度变化趋势与芦苇不同,最高值出现于0~20 cm土层中,随着土层深度增加AOA丰度下降,到40~60 cm出现最低值,AOA丰度与NO-2-N、TOC含量呈正相关.两种植被土壤中AOA丰度均在60~90 cm处有升高趋势.芦苇植被土壤中AOA丰度约是小叶樟植被土壤中AOA丰度的1.49倍.以上结果为湿地AOA生态功能及分布模式的研究提供基础数据,对全球氮循环的研究提供补充.     

基于LCA的北京市公交车节能及温室气体减排潜力分析

新能源公交车是未来城市公交行业节能及温室气体减排的重点发展方向.新能源公交车在行驶阶段具有良好的节能及温室气体减排效果,而汽车制造、能源生产等相关生命周期阶段的能耗及温室气体排放常被忽视,且目前新能源公交车的乘客运载功能相对较弱,可能对节能及温室气体减排的潜力造成较为显著的影响.因此,本文基于北京市公交车的运营特征,采用生命周期评价(LCA)方法,选择客运周转量作为功能单位,核算了天然气公交车、混合动力公交车和纯电动公交车等新能源公交车相对于柴油公交车的节能及温室气体减排效益.结果表明:发展新能源公交车对促进北京市公交行业及城市节能低碳发展具有积极的作用,但相对于基于运营里程的核算结果,本研究新能源公交车节能及温室气体减排潜力均较低,主要原因是新能源公交车的实际载客量相对较低;混合动力公交车和纯电动公交车在空调开启时的节能潜力与温室气体减排潜力均远低于天然气公交车;通过发展情景分析,建议北京市现阶段应优先发展天然气公交车,适当发展纯电动公交车和混合动力公交车,以减少北京市公交车的总体能耗,同时降低温室气体排放强度.     

基于生命周期评价的风力发电机碳足迹分析

本文以我国市场占用率最高的2 MW双馈式风力发电机为研究对象,采用生命周期评价(LCA)方法,核算其全生命周期过程的碳足迹和总能量需求,分析风力发电机不同生命周期阶段的环境影响,识别其减碳潜力.研究结果表明,风力发电机生产阶段、运输阶段、运行阶段和废弃处理处置阶段的碳足迹(以CO2-eq计,下同)分别为1701 t、61 t、255 t和-325 t;各生命周期阶段的总能量需求分别为10413 GJ、701 GJ、1561.95 GJ和-1081 GJ.风力发电机的碳足迹和总能量需求主要来源于生产阶段,废弃处理处置阶段材料的回收利用有效的降低了生命周期的碳足迹和总能量需求.生产阶段的碳足迹和总能量需求分别占全生命周期碳足迹和总能量需求的101%和90%;废弃处置阶段对碳足迹和总能量需求的贡献为-19%和-10%.每1k Wh风力发电的碳足迹和总能量需求分别为20.7 g和0.14 MJ,风力发电机的能量回收期为0.79年.敏感性分析表明,风力发电机的质量和废弃处置阶段的金属回收率都是风力发电机总能量需求和碳足迹的影响因素.     

Influence of hypothyroidism on oxidative stress,c-Fos expression,cell cycle,and apoptosis in rats testes

The molecular basis of male reproduction for cross-regulation between androgen and thyroid hormone axes is still rudimentary. This study aims to define a possible mechanism of hypothyroidism-induced reproductive influence with respect to sex hormone, mineral, sperm motility, oxidative stress, c-Fos expression, cell cycle, and apoptosis in rat testes. The Wistar rats were randomly divided into control group (NS) and hypothyroidism group [1 ml/100g BW/day, 0.1% propylthiouracil (PTU)] by intragastric gavage for 60 days. Blood samples were collected to measure the serum levels. The epididymis was excised to measure sperm motility and testes were excised to measure mineral, oxidative stress, c-Fos expression, cell cycle, and apoptosis. After 60 days, body weight, relative testes weight, triiodothyronine, and total thyroxine were all significantly decreased, whereas thyroid stimulating hormone was increased in the hypothyroidism group. A significant increase in sex hormone level of estradiol (E2) and significant decreases in testosterone (T) and T/E2 ratio were observed following PTU treatment. And sperm quality was also significantly changed. There were significant decreases in the contents of calcium (Ca²⁺) and zinc (Zn²⁺). On the other hand, malondialdehyde and hydrogen peroxide contents significantly increased, whereas the activity of superoxide dismutase, catalase and nitric oxide synthase and nitric oxide content significantly decreased in hypothyroid rats. The mRNA and protein expressions of c-Fos decreased significantly. The cell percentage in G0/G1 phase increased significantly, whereas decreased significantly in S and G2/M phases. Also, a significant increase in testicular cell apoptosis was observed in hypothyroid-treated rats. These results suggested that hypothyroidism could affect reproductive function in the form of changed sex hormone levels, sperm motility and testicular Ca²⁺ and Zn²⁺, and enhanced oxidative stress leading to c-Fos abnormal expression and increased apoptosis.     

Diurnal and spatial variations of soil NOx fluxes in the northern steppe of China

NO_x emissions from biogenic sources in soils play a significant role in the gaseous loss of soil nitrogen and consequent changes in tropospheric chemistry. In order to investigate the characteristics of NO_x fluxes and factors influencing these fluxes in degraded sandy grasslands in northern China, diurnal and spatial variations of NO_x fluxes were measured in situ. A dynamic flux chamber method was used at eight sites with various vegetation coverages and soil types in the northern steppe of China in the summer season of 2010. Fluxes of NO_x from soils with plant covers were generally higher than those in the corresponding bare vegetation-free soils, indicating that the canopy plays an important role in the exchange of NO_x between soil and air. The fluxes of NO_x increased in the daytime, and decreased during the nighttime, with peak emissions occurring between 12:00 and 14:00. The results of multiple linear regression analysis indicated that the diurnal variation of NO_x fluxes was positively correlated with soil temperature (P < 0.05) and negatively with soil moisture content (P < 0.05). Based on measurement over a season, the overall variation in NO_x flux was lower than that of soil nitrogen contents, suggesting that the gaseous loss of N fromthe grasslands of northern China was not a significant contributor to the high C/N in the northern steppe of China. The concentration of NO_x emitted from soils in the region did not exceed the 1-hr National Ambient Air Quality Standard (0.25 mg/m³).     

Research on whole life cycle carbon emission model of typical buildings

Based on the theory of life cycle assessment (LCA), this article analyzes the influence factors on carbon emissions from residential buildings. In the article, the life cycle of residential buildings has been divided into five stages: building materials production period, construction period, operation and maintenance period, demolition period, and solid waste recycle and disposal period. Based on this definition, the authors provide a theoretical model to calculate carbon emissions of residential building life cycle. In particular, the factor of human activities was introduced in the calculation of carbon emissions from the buildings. Furthermore, the authors put forward a model for calculation with the unit of carbon emissions for per-capita living space.     

长江河口潮区界溶解态无机氮磷的通量

利用长江河口潮区界大通站的水质资料探讨了溶解态无机氮、磷浓度和通量的变化。结果表明：NO3^-,NH4^ ,DIN的浓度随季节变化不明显，而NO2^-,PO4^3-的浓度是枯季较高、洪季较低：1963－1984年间，NO3^-,NO2^-,NH4^ 、DIN和PO4^3-的年平均浓度分别为17．1、0．43、7．1、24．7、0．19μmol/L，平均通量分别为33．1、0．51、3．67、10．5和0．54kg/s，平均年通量分别为104.44,1.61,11.56,33.1和1.70万t；溶解态无机氮、磷的通量由于受到流量的影响而在年内分配不均匀，其中NO3^-,NO^-,NH4^ DIN和PO4^3-在洪季的通量分别为全年的72．9％，58．1％、69．2％、71％和68．3％；NO3^-,NO2^-，DIN年通量的总变化趋势是稳步上升，且与氮肥使用量成高度显著的正线性相关。1998年，NO3^-,NO2^-,NH4^ 和PO4^3-的年通量分别为477．3，1．356、3．097和2．296万t。     

面向2035的节能与新能源汽车全生命周期碳排放预测评价

发展节能与新能源汽车是降低交通运输行业碳排放的重要技术路径.为量化预测节能与新能源汽车的全生命周期碳排放,利用全生命周期评价方法,以汽车相关技术路线和政策为参考,选取燃油经济性、整车轻量化水平、电力结构碳排放因子和氢能碳排放因子为关键参数,构建传统燃油汽车(ICEV)、轻度混合动力汽车(MHEV)、重度混合动力汽车(HEV)、纯电动汽车(BEV)和燃料电池汽车(FCV)的数据清单并对其全生命周期碳排放进行量化预测评价,对电力结构碳排放因子和不同制氢方式碳排放因子进行了敏感性分析和讨论.结果发现,2022年ICEV、 MHEV、 HEV、 BEV和FCV的全生命周期碳排放量(以CO₂-eq计)分别为208.0、 195.5、 150.0、 113.5和205.0 g·km^-1.到2035年,BEV和FCV相比于ICEV具有较为显著的减碳效益,分别降低69.1%和49.3%.电力结构的碳排放因子对BEV的全生命周期碳排放的影响最显著.关于燃料电池汽车的不同制氢方式,短期应以工业副产氢提纯为主供应FCV氢能需求,长期以可再生能源电解水制氢和化石能源...     

Life cycle assessment analysis of active and passive acid mine drainage treatment technologies

Acid mine drainage (AMD), resulting from open-cast coal mining, is currently one of the largest environmental challenges facing the mining industry. In this study, a life cycle assessment (LCA) was conducted to evaluate the environmental impacts associated with the construction, operation and maintenance of different AMD treatment options typically employed. LCA is a well-reported tool but is not documented for AMD treatment systems despite their ubiquitous implementation worldwide. This study conducted detailed LCA analysis for various passive and active AMD treatment approaches implemented or considered at a major coal mine in New Zealand using a comparative functional unit of kg acidity removed per day for each treatment option. Eight treatment scenarios were assessed including active limestone and hydrated lime treatments, and compared to passive treatments using limestone and waste materials such as mussel shells. Both midpoint and endpoint LCA impact categories were assessed. Generally, the active treatment scenarios demonstrated greater LCA impacts compared to an equivalent level of treatment for the passive treatment approaches. Lime slaking had the greatest LCA impacts, while passive treatment approaches incurred consistently less impacts except for one passive treatment with a purchased energy scenario. A 50% reduction in transportation distances resulted in the lowest LCA impacts for all scenarios. This study highlights the importance of evaluating the environmental and social impacts of AMD treatment for the mining industry.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).