基于GB/T 29309标准的HALT测试技术分析

本文以标准GB/T 29309-2012为基础,以某款开关电源为例,对HALT试验设备、工作极限与破坏极限、试验步骤及设备运行中注意点等方面展开介绍,为电子产品可靠性测试提供相关探讨。     

关于汽车内饰塑料件气候交变试验的分析

通过对高温条件、低温条件、温湿条件的试验机理进行分析,对气候交变试验标准的合理性提出了质疑,并给出一种对比验证的方法进行验证,以期规范和有机统一不同的气候交变试验标准。另外还探讨了气候交变试验在验证产品生命周期上的意义以及气候交变试验与功能试验结合的必要性。     

A Cumulative Energy Demand indicator (CED), life cycle based,for industrial waste management decision making

Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications.In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented.One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making.The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.     

Domestic or imported? An assessment of carbon footprints and sustainability of seafood consumed in Australia

The distance between where food is produced and consumed is increasing, and is often taken as evidence of an unsustainable global food system. Seafood is a highly traded commodity yet seafood sustainability assessments do not typically consider the impacts of the movement of products beyond the fishery or farm. Here we use life cycle assessment to examine the carbon footprint of the production and distribution of select seafood products that are consumed in Australia and determine differences in the sustainability of imports and their domestically produced counterparts. We found that the distance food is transported is not the main determinant of food sustainability. Despite the increased distance between production and consumption, carbon footprints of meals from imported seafood are similar to meals consisting of domestically produced seafood, and sometimes lower, depending on the seafood consumed. In combining LCA with existing seafood sustainability criteria the trade-offs between sustainability targets become more apparent. Carbon ‘footprinting’ is one metric that can be incorporated in assessments of sustainability, thereby demonstrating a broader perspective of the environmental cost of food production and consumption.     

制定粉尘卫生标准的新趋势——介绍欧洲的经验并提出几点建议

介绍了近年来欧洲国家新的粉尘卫生标准及其监测、管理方法,分析其制定粉尘卫生标准的经验,并与我国的粉尘卫生标准情况做了初步的比较,提出了建立我国新分级分类粉尘卫生标准体系的建议。     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.     

基于循环特性的镍氢和锂离子电池环境影响机制分析

为了了解镍氢电池和锂离子电池在生产、使用、废弃或回收过程中的环境影响,建立了一种简单快速的二次电池环境影响机制分析方法。通过生命周期评价(LCA)方法,采用Eco-indicator99体系,综合考虑电池循环容量衰减和循环次数的影响,建立了二次电池环境影响机制分析模型,并运用此模型对两种实验用二次电池(镍氢电池和锂离子电池)的环境影响机制进行了研究。结果表明:1)在所选取的两种二次电池当中,锂离子(Li-ion)电池的环境影响明显比镍氢(Ni-MH)电池的低;2)随着循环次数的增加Li-ion电池环境影响衰减比Ni-MH电池的明显,即随着使用循环次数的增加,Li-ion电池对环境的影响会降低到更多。综合来说,所选取的Li-ion电池比Ni-MH电池更具环境可持续性。文中所提出的环境影响机制分析模型同样可以应用于其他二次电池,以期为环境友好型二次电池的开发提供帮助。     

植物及土壤碳同位素组成对环境变化响应研究进展

植物和土壤的δ13C（碳同位素组成）能可靠记录环境信息,综合反映植物的生理生态特征以及碳循环过程中的生物化学过程,为人们理解生态系统碳循环提供有用信息.因此,研究植物和土壤的δ13C与环境因子的关系可以揭示生态系统碳循环的格局及其控制因子,进而有效预测全球变化及其对生态系统的影响.对植物和土壤的δ13C以及二者的差值（Δδ13C）与气候因子（如温度、降水量、大气压强等）、土壤因子（如C/N、土壤质地、土壤pH等）的关系进行了综述.现有研究表明:C₃植物的δ13C与降水量、大气压强均呈负相关,与温度的关系非常复杂,而针对C₄植物和在群落水平上开展的研究还较少;土壤δ13C与降水量、土壤C/N、土壤w（粉粒）及w（黏粒）均呈负相关,与温度、土壤pH、土壤w（砂粒）均呈正相关,然而环境因素间的耦合作用使得情况复杂化,多种环境因素的匹配关系究竟如何影响土壤δ13C的机制问题仍有待深入研究;Δδ13C能够更加全面准确地反映土壤碳循环信息,但对其与环境因子关系的研究较少,并且影响Δδ13C的驱动因子及机制也不明确.因此,在土壤-植物体系内,同时在物种和群落水平上,进行植物和土壤δ13C特别是Δδ13C与环境因子关系的研究,能够更加准确地预测和揭示环境变化对生态系统碳循环的影响,这也将是今后该领域的研究重点.      

基于恢复能力与影响周期的围海养殖工程生态损害特征及补偿标准——以象山县水湖涂名优水产养殖区为例

以宁波市象山县水湖涂名优水产围海养殖工程为研究对象,通过构建生态服务价值损害评估指标体系,分析了围海养殖区的生态损害特征,并基于海域自我恢复能力,研究了围海养殖工程的生态补偿标准和资源恢复周期。结果显示：（1）名优水产围海养殖工程造成的生态损害总价值为318.90万元/a,单位面积损害价值为3.20万元/hm²·a。生态损害主要以生态服务型为主,占总量比例为53.54%。（2）生物资源型损害类别中,潮间带生物损害价值最大,为59.71万元,其次为紫菜养殖和鱼卵、仔鱼,二者损害价值量相当,占总量比例均为13.55%,底栖生物和游泳生物价值损失则均较小。（3）生态服务型损害类别中,一级类别主要以调节服务价值为主,占总量比例为32.56%。二级损害类别中,废弃物处理损害价值最大,为71.77万元,休闲娱乐损害价值也较大,占总量比例为12.80%,其他类型则价值损失较小。（4）名优水产围海养殖工程基于海域自我恢复能力的生态补偿标准为280.90万元/a,单位面积补偿价值为2.82万元/hm²·a,对比生态损害价值确定的补偿标准,总量减少11.92%。项目施工结束后,近岸滩涂恢复速度为4.6320 hm²/a,约13年后新围大堤附近滩涂将恢复到围海前的基线水平。     

不同工况下轻型车油耗试验驾驶方式评价

在一台性能稳定的汽油车上由同一驾驶人员按平顺、粗暴和正常3种驾驶方式分别进行NEDC （新欧洲行驶工况）、FTP75（美国认证工况）以及WLTC （世界统一轻型车测试循环）工况油耗试验,采用能量变化率（ER）、距离变化率（DR）、能量经济性变化率（EER）、绝对速度改变率（ASCR）、速度平方根误差（RMSSE）以及惯性做功改变率（IWR）6个指标作为驾驶质量评价指标,通过分析计算每次试验各项评价指标及其与燃料消耗量变化的相关性,确定了油耗试验驾驶方式的合理性边界条件.结果表明,对于WLTC和FTP75工况,平顺驾驶和粗暴驾驶均会导致评价指标变大或者变小,驾驶方式与评价指标呈规律性变化;对于NEDC工况,不同的驾驶方式对NEDC工况油耗影响较小.油耗试验的边界条件,WLTC工况的EER为（0.25±0.47）%、ASCR为（1.20±0.97）%、RMSSE为（0.85+0.15）km/h、IWR为（2.15±1.27）%时,可认为油耗试验的驾驶方式较为合理;FTP75工况的EER为（-0.09±0.69）%、ASCR为（-0.59±0.42）%、RMSSE为（0.88+0.34）km/h以及IWR为（-0.69±1.66）%时,油耗试验的驾驶方式较为合理.