The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

A study on the orbit of air temperature movement

In this paper, we describe an air temperature movement by mapping its time series to the polar coordinates: the value of the time series is plotted on the radial coordinate and the time on the angular coordinate. In this way, both the yearly and daily air temperature movements from five different locations of China are used to demonstrate that, in an intuitionistic view, air temperature movement is neither random nor chaotic, but has its own orbit. We then propose an elliptic orbit model for the air temperature movement. Our proposed model provides quite good results when it is applied to the evaluation of yearly air temperature movements in eight locations in various parts of the world, and the evaluation of daily air temperature movements in five locations in Hunan Province of China on December 17, 2005. Results show that our approach provides a concise and helpful model for air temperature analysis.     

Effect of temperature on single and competitive adsorptions of Cu(II) and Zn(II) onto natural clays

This study conducted a combined adsorption-sequential extractionanalysis (CASA), by which five phases (i.e., exchangeable, carbonate, Mn-Oxide, organic, and Fe-Oxide phases) of adsorbed heavy metals were analyzed, to investigate temperature effects on single and competitive adsorptions of Zn(II) and Cu(II) ontonatural clays. In the case of single adsorption of Zn, the exchangeable phase adsorption decreased from 65 to 40%, but thecarbonate phase adsorption increased from 30 to 40%, with an increase in temperature from 15 to 55 °C. However, in itscompetitive adsorption with Cu, Zn was mostly present in the exchangeable phase (over 90%), and with an increase in temperature, the exchangeable phase adsorption decreased only 10%. In the case of Cu, over 50% among the total amount of adsorption was present in the carbonate phase in both cases ofsingle and competitive adsorptions. The carbonate phaseadsorption of Cu increased from 56 to 61% and from 60 to 66% in single and competitive adsorptions, respectively, with atemperature increase. These results show that in the case of Zn,the major mechanism of retention in natural clay soils might beexchangeable phase adsorption, especially in the case of competitive adsorption with Cu. However, in the case of Cu, the major mechanism might be carbonate phase adsorption, which is known to be a more immobile phase than exchangeable phase adsorption. It seems that the adsorption of Zn and Cu onto natural clays is an endothermic reaction, which represents thatthe adsorption equilibrium constants and capacities increase with a temperature increase, with the exception of exchangeablephase adsorption.     

华北山区温度推算模式和应用

利用华北山区气象站观测的温度与其所在纬度、经度和高度，分山区建立宏观地面气温场方程。采用１：２０万地形图，以１０＇经、纬度为步长，判读其高度值，代入已建立好的方程中，经地形项订正，推算华北山区年、月平均温度、年较差和ΣＴ＇≥１０℃，其精度达极显著水平。计算结果使我们对华北山区热量资源有了新的认识，最后求算华北山区的主要水果最优品质种植上限高度。     

唐钢2×150t转炉煤气回收系统设计及运行实践

在此较详细地介绍了唐钢一炼钢厂 2× 15 0t转炉煤气回收湿法除尘工艺和系统的技术特点。该系统设计吸收了国内外大型转炉煤气回收的经验。经近 18个月的生产实践 ;认为效果良好 ,煤气回收率近 80 % ,热值近 80 0 0kJ Nm3,放散排放浓度小于 80mg m     

GJB 150A淋雨试验强化试验程序数值模拟和试验装置设计研究

目的 研究GJB 150.8A—2009《军用装备实验室环境试验方法第8部分:淋雨试验》中强化试验程序的工程实现方法.方法 在标准解读的基础上,以强化试验程序用喷嘴为对象,建立数值模型,分析喷嘴在强化试验程序过程中的流场分布,并基于分析结果给出强化试验程序试验装置设计的思路和方法.结果 在喷嘴内,压力变化剧烈,极短距离内由276 kPa迅速降至101 kPa.水流经过喷嘴经历了激烈的加速过程,从距离喷嘴出口0.01～0.4 m,水流速度从251 m/s迅速降至17.8 m/s,到远场趋于稳定.结论 分析结果对指导强化试验程序的试验装置的设计和试验实施具有重要参考意义.     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

测空气中SO2时的主要影响因素

目前测定空气中SO2主要采用甲醛吸收-副玫瑰苯胺分光光度法。该法操作比较严格，测试结果的准确度受诸多因素的影响。因此文中对这些影响因素进行了探讨，主要为试剂质量、显色温度和显色时间、溶液加入顺序、比色皿、空气采样器流量、采样温度、导气管的吸附等因素对测定结果的影响进行了探讨。     

利用多次回归拟合水的饱和蒸气压与温度的关系表达式

在使用于湿球测定锅炉烟气含湿量的过程中,需要查找水的饱和蒸气压,非常不方便.利用D-196和<化工原理>上册中取得部分数据,用多次线性回归的方法,拟合出水在0～200℃范围内的饱和蒸气压与温度的关系表达式;并对该表达式的误差进行了分析,误差均值为0.2‰,最大值也只有0.8‰,完全可以满足环境监测中数据处理的精度要求.