加工制造业机械设备折旧过程CO2排放计量探讨

利用折旧法中的楼梯法,再结合设备的主要组成物质的排放因子,初步分析了机械设备在折旧过程中排放的CO2量。研究表明,机械设备在折旧过程中排放的CO2量是碳排放计量工作中不可缺少的一部分。     

Assessing inhalatory and dermal exposures and their resultant health-risks for workers exposed to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists in a fastener manufacturing industry

This study first assessed workers' inhalatory and dermal exposures to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists. Then, their resultant lung cancer and skin cancer risks were estimated. Finally, control strategies were initiated from the health-risk management aspect. All threading workers in a fastener manufacturing plant were included. 16 inhalatory and 88 dermal PAH exposure samples were collected. Results show that the inhalatory gas phase total PAH exposure level (8.60x10(4) ng/m(3)) was much higher than that of particle phase (2.30x10(3) ng/m(3)). Workers' mean inhalatory exposure level (8.83x10(4) ng/m(3)) was lower, but its corresponding 1-sided upper 95% confidence level (UCL(1,95%)=1.02x10(5) ng/m(3)) was higher than the time-weighted average permissible exposure level (PEL-TWA) regulated in Taiwan for PAHs (1.00x10(5) ng/m(3)). The mean whole body total PAHs dermal exposure levels was 5.44x10(6) ng/day and the top five exposed surface areas were lower arm, hand, upper arm, neck, and head/front. The estimated lifetime skin cancer risk (9.72x10(-3)) was lower than that of lung cancer risk (1.64x10(-2)), but both were higher than the significant risk level (10(-3)) defined by the US Supreme Court in 1980. The installation of a local exhaust ventilation system at the threading machine should be considered as the first priority measurement because both lung and skin cancer risks can be reduced simultaneously. If the personal protection equipment would be adopted in the future, both respiratory protection equipment and protective clothing should be used simultaneously.     

信息化机房与网络改造方案设计

工厂信息化总体结构可分为2个网络,1个数据平台,3个层次,可为工厂的高层决策、生产经营管理提供安全可靠的信息化支撑平台,提高企业的综合竞争力,根据实际工程案例详细论述了机房与网络改造方案的设计,对工厂信息化机房的设计具有指导性意义,图1,参3．     

Manufacturing system sustainability through lean and agile initiatives

Sustainability is one of the most critical issues facing manufacturers today. The industries must develop new and innovative approaches to ensure sustainability in economic, environmental and social aspects. The operational excellence strategies such as Lean and Agile manufacturing can be applied in the industries that add value to the product by eliminating waste and quickly respond to dynamic changes in demand. This paper presents a framework that builds and assesses the sustainability of the manufacturing system with combined lean and agile concepts. Analytical Hierarchy Process and Analytical Network Process are identified as suitable methodologies to analyze the model. The model is validated in an Ayurveda Pharmaceutical industry to identify the most important factors of lean and agile manufacturing that build and enable the sustainability dimensions such as Economic, Environmental, Social, Technological and Ethical. The results show that the industry focuses more on economic aspects of sustainability followed by social, environmental, ethics and technological dimensions of sustainability in the case of a lean perspective. For an agile perspective, the weightage is more for social dimension followed by ethics, economic, technological and environmental dimensions of sustainability.     

多级厌氧法处理螺旋霉素工业发酵菌渣效果的研究简

通过自主设计的多级厌氧反应器系统来考察半连续处理螺旋霉素工业发酵菌渣的效果。该系统总反应体积为44 L,由4个11 L的升流式厌氧反应罐组成,罐体间采用串联方式连接。121 d的连续运行周期分为3个阶段,各阶段的有机负荷率分别为1.27、1.82和2.73 kg COD/（m³·d）。全过程中主要监测了各级罐体的产气量和螺旋霉素的降解。结果表明,多级厌氧反应器系统启动初期会出现产气不稳定现象,经过2个月的运行之后系统达到稳定状态。在有机负荷达到2.73 kg COD/（m³·d）时,各级罐体仍能稳定运行,总产气的45%集中在1号罐。在系统启动初期,螺旋霉素不能被明显降解。运行约80 d后,整个体系达到了快速降解螺旋霉素的状态,在2.73 kg COD/（m³·d）的有机负荷率下,螺旋霉素降解率达到97%,同时可溶性COD降解率也达到了90%。     

Empirical analysis of carbon tariff’s effect on the export structure of China’s manufacturing industry and social welfare based on the GTAP model

In recent years, carbon emissions have gradually evolved from an environment issue into a political and economic one. Carbon tariff has brought about new trade barriers of developed countries, and in order to enhance the industrial competitiveness of developed countries, it will produce unfavorable impact on developing countries. Concentrated on the manufacturing industry, which is the most intensive high-carbon industry in China’s export structure, this article studies the relationship between carbon tariff policy and industry structure of export trade and builds up a relation between climate change and international trade. First, by means of establishing a partial equilibrium model, it applies geometric analysis and mathematical analysis to compute the impact on China’s manufacturing export trade and the consequences of the introduction of the US carbon tariff to China’s manufacturing industry that has already imposed a domestic shipping carbon tax. Furthermore, with the application of the GTAP model, it estimates the overall economic and welfare effects on China’s manufacturing industry if the US and Europe introduce carbon tariff by means of four ways, and then analyzes the influence on China’s manufacturing industry export structure and social welfare as well. The result shows that the introduction of the US carbon import tariff lowers China’s export price and export volume, and the implementation of a domestic carbon tax justifies a higher export price and a lower export volume for China. However, the degree of export reduction is smaller than that under the effect of the US carbon tariff. In the case of developed countries imposing carbon tariff on China’s energy-intensive industries, such as chemical rubber products, oil and coal-processing industry and paper industry, whose export would be reduced, the negative impact on the paper industry is the severest, which will decrease the paper industry’s export ranging from 1.79% to 6.05%, whereas the other industries’ export will increase. Anyhow, it will promote China’s manufacturing industry to adjust the export structure to a certain extent. In addition, it will lead to a decrease in China’s welfare, with a decrease between $2.134 billion and $8.347 billion. Finally, this paper provides information on international coordination, export structure adjustment and green manufacturing adjustment as a reference for the development of China’s manufacturing industry.     

Spatial Organization Mechanism of Aircraft Manufacturing

Unquestionably, aircraft industry plays an important part in both economy and security of a nation. However, few of articles have dealt with the spatial development of this industry sector. The purpose of this article is to analyze the dynamics of agglomeration and diffusion of aircraft industry.In a historical view, with some spatial analysis methods, this research discusses the characteristics and patterns of aircraft industry's spatial organization and evolution, globally, nationally and regionally respectively. We find out there is a 'Matthew effect' in aircraft industry of the world, and the spatial evolution of the industry is consistent with the nation's industrialization process. Then, it concludes that the main agglomeration forces consist of capital, talents, technology and cluster's advantages, and the main diffusion forces include comparative advantages, cost and risk sharing, emerging markets, development policy for backward regions and military requirements. All the factors can be divided into market forces making the spatial development of aircraft industry normal and non-market forces making that irregular. In particular, lessons from the USA and France are expected to be conducive to the rise of China's aircraft industry in the future.     

Controversy of International Carbon-motivated Border Tax Adjustment and Its Impact on China’s Manufacturing Industries

Carbon-motivated border tax adjustment (BTA) aims to compensate for the loss of competitiveness of carbon intensive products due to carbon dioxide abatement actions.Based on the analysis of the international background of carbon-motivated BTAs,this paper discusses the fundamental motivation leading to US policy transformation,the potential impacts of the policy on China’s manufacturing industries,and the compatibility of the policy to WTO rules.Carbon-motivated BTAs violate the fundamental principle of the UNFCCC,and potentially conflict with the core WTO principle of non-discrimination reflected in the GATT Articles I and III.However,Article XX of the GATT may be applicable.Thus,the author suggests several measures to alleviate the impacts of carbon-motivated BTAs,and puts forward countermeasures based on carbon consumption per capita.     

多生命周期制造初探

本文提出了多生命周期制造这一新的制造模式,多生命周期制造是面向转功能次制造的制造模式,在产品设计的过程中,就已经考虑了产品寿命结束后,在投人二次制造时,应具有的二次功能,使设计的产品具有两个甚至两个以上不同的生命周期。所谓的“转”,即转变功能,投入新使用领域;“次”是相对于第一次生产制造的第二次、第三次而言。本文还给出了这一制造模式的定义,初步分析了其与再制造、产品多生命周期工程的区别,并介绍了此制造模式的关键技术。最后,列出了部分该制造模式可进一步研究的方面,并对其将来的发展领域做了简单展望。     

木制家具生产行业的职业危害与个体防护

通过对木制家具生产工艺流程及加工过程的调研分析,归纳出木粉尘、噪声、有机挥发物、机械伤害等10种主要危害因素,将各种危害因素对安全健康的影响和致病形式进行总结,并对木制家具生产企业进行现场调查。指出企业在职业危害防护措施方面的欠缺与不足,同时对木制家具生产行业职业危害的防护措施、个体防护装备的选用以及防护装备使用中的注意事项进行说明。研究认为,木制家具生产行业中危害因素多且危害程度严重,安监部门应加强对企业的监督管理,企业应为职工提供有效防护措施和个体防护装备。