介孔材料在水处理中的应用

介孔材料由于具有一系列独特的性质,如较高比表面积、较大且连续可调的孔径等,使其在化工、医药、环境保护、纳米功能材料等领域得到了广泛的研究和应用。本文从介孔材料作为吸附剂和催化剂两个方面综述了其在水处理中的应用,并对应用中存在的问题和前景作了分析。     

阳极材料对苯酚废水处理效果的影响研究

应用自制电化学反应器研究了不同阳极材料对苯酚废水的电催化氧化处理效果的影响.实验结果表明,在相同的实验条件下,钛基RuO2和钛基SnO2种新型阳极处理苯酚废水的电催化氧化效果要远好过传统的阳极材料石墨.     

南京典型古建筑的消防现状调查和消防对策

通过对江苏南京代表性古建筑朝天宫、甘熙故居、鸡鸣寺和净觉寺的实地深入调查,从结构、材料、内容、布局和环境等方面分析了古建筑普遍存在的火灾危险性,考察了古建筑中现代消防设施建设、消防资金投入、消防管理措施和现代消防材料和技术应用的现状,发现多数古建筑在消防防护方面仍处于保守、常规、落后和消极的状态。为实现对古建筑价值的最大限度保护,应从消防安全布局、消防站建设、消防通道设计、消防给水供应、消防通讯保障、消防装备配置等方面进行性能化设计和规划;在遵循“修旧如旧”的修缮和维护原则下,需要勇于尝试和接纳纳米材料等新型化学保护材料和技术。     

类氧化硅气凝胶吸附材料的制备及其吸附性能

以有机硅高沸物和Na₂SiO₃·9H₂O为原料,采用溶胶-凝胶法制备出疏水性的类氧化硅气凝胶吸附材料。采用透射电子显微镜、傅里叶变换红外分析仪和比表面与空隙度分析仪对该吸附材料的结构进行表征。表征结果显示,该吸附材料呈海绵状多孔结构,比表面积为294.48 m²/g,孔径分布较宽（为2 ~140 nm）,平均孔径为8.95 nm。实验结果表明：采用该吸附材料常温下静态吸附处理质量浓度为10 mg/L的罗丹明B（RhB）溶液,在类氧化硅气凝胶吸附材料加入量50 g/L、静态吸附时间5 h的最佳静态吸附工艺条件下,RhB去除率为98.8%,吸附后RhB质量浓度为0.124 mg/L;采用该吸附材料常温下动态吸附处理质量浓度为15 mg/L的RhB溶液,吸附4 h后开始穿透,吸附7 h后完全穿透。穿透时间较长,表明该吸附材料具有较大的吸附容量。     

S-K型管式混合器-微絮凝高速过滤的实验研究

基于2种传统管式混合器的特点,研究了苏尔士-凯尼斯（S-K）新型组合管式混合器在预氧化-微絮凝高速过滤技术中的应用,对苏尔士（Sulzer）管式混合器、凯尼斯（Kenics）管式混合器及s-K型管式混合器高速过滤出水水质进行了对比分析,结果表明,S-K型微絮凝方式对浊度、COD及TP的平均去除率比其他2种混合器混合方式的去除效果提高了5％～10％,分别为80．3％、64．76％和51．15％。S-K型混合器过滤形成的絮体能够充分利用深层滤料,延长过滤周期。     

Knowledge-based system,equipped with cluster analysis for eco-material selection: an automobile structure case study

The aim of this study is to develop a material selection framework structured around a knowledge-based system (KBS). Specifically, a hybrid data mining technique is employed to extract knowledge from large datasets using cluster analysis techniques; the mined knowledge then serves as the inference logic within the KBS designed for material selection purposes. Cluster analysis results are used as a basis for the tree-based structure of the KBS where if–then rules are developed based on the general cluster properties; that is, inference logic is structured in a way such that it can predict general sustainability characteristics of the material as well as its exact mechanical, cost and physical properties. To develop the structure of the KBS, the selection structure employs sustainable material indices. Additionally, the proposed material selection model of the KBS is purposefully composed of material sustainability, functionality and cost indices. The constructed knowledge is then demonstrated for selecting automobile structural panels.     

Enhancement of phosphorus sorption onto light expanded clay aggregates by means of aluminum and iron oxide coatings

Phosphorus (P) loading from non-point or point sources increases the eutrophication risk of natural waters. The functioning of constructed wetlands (CWs) used as natural water treatment systems can be improved by means of additional materials adsorbing soluble P. In this study, light expanded clay aggregates (LECA) and LECA coated with aluminum (Al) oxide (Al-LECA) or iron (Fe) oxide (Fe-LECA) were tested for their efficiency as P sorbents in the pH range 3–8. The oxide coatings duplicated the actual sorption capacity calculated from the sorption isotherms at the P concentration in the equilibrium solution of 20 μg L⁻¹, assumed to be the allowable P level in purified water. In the oxide-coated LECAs the sorption was fast and followed both the first- and second-order Lagergren kinetic models, suggesting that the formation of a binuclear surface complex was feasible. In LECA, sorption was markedly slower and followed the first-order kinetic model, indicating that retention occurred through a monodentate attachment. These findings were in harmony with the degree of P saturation (DPS) of the sorbent surfaces at the highest P addition level (200 μg L⁻¹), DPS being decisively higher for LECA than for the oxide-coated sorbents. Accordingly, at higher pH values the competition by hydroxyl ions diminished the sorption in LECA relatively more than that in the coated sorbents. In agreement with the acidity of Al³⁺ being 100 times lower than that of Fe³⁺, at elevated pH the sorption by Al-LECA proved to be less reversible than that by Fe-LECA. The results provide evidence that in CWs Al-coated sorbents are superior to Fe-coated ones that are also redox-sensitive and may lose their sorption properties in anoxic conditions.     

57种臭氧前体有机物混合标准气体量值比对研究

标准物质的量值准确性是监测数据准确的重要前提。为科学评价57种臭氧前体有机物混合标准气体量值的准确性,研究建立了定量环进样-中心切割-气相色谱-双火焰离子化检测器分析方法与量值比对方法(E_n值法),并对市售6个品牌各2个批次标准气体开展量值比对研究。研究结果表明,4个品牌标气量值一致性、准确性较好,2个品牌存在5～22种组分量值偏离(E_n绝对值为1.0～5.3),用于开展臭氧前体有机物监测的标准物质质量仍需持续监督、提升。     

纳米材料在痕量重金属离子测定中的应用

介绍了纳米材料的吸附性能,评述了影响其分离富集重金属离子效果的主要因素,综述了纳米金属氧化物、碳纳米管及其他纳米材料在痕量重金属离子测定中的应用进展,提出提高纳米吸附材料的选择性和稳定性,开发便携式商品化的纳米材料萃取小柱是今后的发展方向.     

珠江三角洲制鞋行业挥发性有机化合物排放系数研究

采用工艺调查与现场监测相结合的方法,以物料衡算法为依据,通过现场监测结果进行验证,研究了制鞋行业挥发性有机化合物(VOCs)排放系数。结果表明,水性胶粘剂使用企业的VOCs排放系数为(5.25±2.67)g/双,油性胶粘剂使用企业的VOCs排放系数为(30.11±10.60)g/双,根据不同类型胶水在制鞋行业中所占的权重,可得到反映地方特色的制鞋行业VOCs排放系数。