基于能值分析的城市物质代谢研究

采用能值分析方法,构建了基于城市物质代谢通量指标、代谢存量指标和代谢效率指标的城市物质代谢指标体系,并以北京、天津、上海和重庆四个直辖市为例计算了2005年四城市物质代谢状况。分析结果表明:北京市代谢效率最低;上海市代谢通量和代谢存量最大,但是代谢效率不容乐观;重庆市代谢通量和代谢存量在四个城市中居于末位,但是代谢效率最高;天津市在四个城市中代谢呈中等水平。最后根据分析结果对城市今后的可持续发展提出了意见和建议。     

Potential utilization of riverbed sediments by hydrothermal solidification and its hardening mechanism

Hydrothermal solidification of riverbed sediments (silt) has been carried out in a Teflon (PTFE) lined stainless steel hydrothermal apparatus, under saturated steam pressure at 343–473 K for 2–24 h by calcium hydrate introduction. Tobermorite was shown to be the most important strength-producing constituent of the solidified silt. A longer curing time or a higher curing temperature was shown to be favorable to the tobermorite formation, thus promoting strength development; however, overlong curing time (24 h) seemed to affect the strength development negatively. The hardening mechanism consisted of the crystal growth/morphology evolution during the hydrothermal process. The species dissolved from the silt were precipitated first as fine particles, and then some of the particles seemed to build up the rudimental morphology of calcium silicate hydrate (CSH) gel. The CSH gel, with precipitated particles, appeared to cause some reorganization within the matrix, which made the matrix denser and thus gave an initial strength development. Tobermorite, transformed inevitably from the CSH gel, reinforced the matrix with its interlocked structure, and thus further promoted the strength development.     

基于矿渣的一种新型建筑材料试验研究

通过化学分析、抗压强度、抗折强度等试验,研究了一种以矿渣为主要成分的新型建筑材料。试验结果表明：该种新型建筑材料的抗压强度和抗折强度能够达到525水泥相关要求,可满足实际工程的需要。     

云南荞麦地流域地下水水化学特征及物质来源分析

为研究荞麦地流域地下水的水化学特征及物质来源,2017年7月在研究区共采集地下水的水样32个,综合运用聚类分析、因子分析和路径模型分析等方法,分析了荞麦地流域地下水水化学特征,并定性和定量探讨了荞麦地流域地下水水化学的物质来源.结果表明,研究区内水体整体呈弱碱性,Ca~(2+)、Mg~(2+)、SO_4~(2-)、HCO_3~-和N_3O~-等主要阴阳离子具有较高的空间变异性.通过聚类分析可知,研究区内地下水可分为两大类:A类和B类,分别具有两个子集:A_1、A_2、B_1和B_2,并且从A类地下水到B类地下水化学类型开始变得复杂,A类地下水水化学类型均为HCO_3-Ca型,B_1类地下水和B_2类地下水分别有HCO_3-Ca型、HCO_3-Na·Ca型、HCO_3-Na·Ca·Mg型和HCO_3-Ca型、HCO_3-Ca·Mg型、HCO_3-Na·Ca型各3类.为进一步探讨地下水水化学的影响因素,通过因子分析和路径模型分析可确定碳酸盐岩、人类活动、蒸发岩和硅酸盐岩是地下水的主要物质来源.其中人类活动的作用和MgSO_4型蒸发岩的溶解,是形成以碳酸盐岩为地下水化学组分的主要来源,同时具有多元地下水水化学特征的重要原因.     

高水无机材料防灭火性能影响因素研究与实践*

为进一步揭示高水无机材料抑制煤自燃机理,将其更好地应用于煤矿防灭火领域,开展高水无机材料流动渗透性能实验与高水无机材料抑制煤堆自燃实验,研究不同水灰比和不同空隙率条件下高水无机材料浆液流动渗透规律和高水无机材料浆液煤堆自燃降温规律。结果表明:高水无机材料浆液的水灰比和煤块间的间隙宽度对其流动渗透性能有显著影响,煤堆不同径向距离处的温度均呈现出开始迅速降低、之后缓慢降低的2个降温阶段。三河尖矿防灭火工程实践应用表明水灰比28∶1的高水无机材料浆液有较好的防灭火效果。     

储氢材料Kβ-MgH2的动态真空安定性研究

为研究储氢材料Kβ-MgH2分解放气过程,在以10 ℃为步长,80~130 ℃区间内,48,120 h时间条件下,采用基于传感器压力变化计算被测物质分解放气量的动态真空安定性测试(DVST)方法,得到在上述条件下Kβ-MgH2分解过程中的压力变化、Kβ-MgH2的单位分解放气量和在不同研究温度下的分解放气规律,分析DVST测试时长的设置方法,验证Kβ-MgH2在时温等效系数为2.5时的时温等效特性。结果表明:在选定的测试条件下,Kβ-MgH2分解放气量稳定,单位分解放气量与样品状态无关;Kβ-MgH2单位质量放气量先快速增加,随后趋于平稳,测试温度越高,Kβ-MgH2放气速率越快,单位质量放气量越大;根据选定的测试温度和温度变化步长,可知Kβ-MgH2分解放气过程具有时温等效性。     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

危化品泄漏围堵材料理化性能及燃烧行为研究

针对易燃液体泄漏围堵问题,开发了1种可快速发泡的酚醛泡沫材料,对其表观密度、耐水性、耐酸性、耐碱性、氧指数、燃烧行为及产烟成分进行系统研究。研究结果表明:发泡材料在中性和酸性液体环境中表现出良好的耐受性;在碱性环境中稳定性降低,由于共轭效应,导致分子中的H+遇碱性环境发生中和反应;发泡材料的氧指数和锥形量热测试参数（热释放速率、总热释放量及总生烟量等）表明该材料具有良好的耐火性;发泡原料中的含硫交联剂是其燃烧产烟生成较高浓度SO2的主要原因。     

自制模拟样及留样复测的质控技术探讨

介绍了环境监测标准滤膜、标准滤筒、模拟降尘的制备方法、使用方法、实际效果。阐述了滤膜中铅、土壤样品、底泥（沉积物）、污水厂处理污泥等留样的来源、必要性及作用。探讨了滤膜中铅留样复测质控的评判依据。     

氧化铝厂蒸发器发生应力腐蚀的原因分析与防治

对氧化铝厂蒸发器发生应力腐蚀的危害性作了介绍 ,描述了应力腐蚀裂纹的特征 ;对应力腐蚀产生的原因进行了分析 ,并提出了防治措施