物质投入产出表在义马市物质流分析中的应用

结合义马市的社会经济系统,构建了基于三维物质投入产出表(PIOT)的物质流核算模型.从不同层次对该市的社会经济系统进行分析.结构分析表明,经济发展严重依赖本地资源,产业链短,经济结构层次较低,行业关联度低.电力行业和煤炭采掘业为控制资源、污染的关键部门.技术水平分析表明,技术水平低、循环利用率相对较低,使得资源投入、污染排放量大.宏观比较分析表明,人均物质流、物质流强度都较高,物质使用效率低下.要提高该市的资源使用效率、降低污染排放,可通过结构调整、提高技术水平及循环利用率等途径实现.     

福田保税区污水处理厂工艺选择

针对福田保税区的敏感地理位置 ,阐述了在该区域建设污水处理厂所采用工艺的确定过程和选择依据 ,并对第二阶段的比选工艺作了较为详细的比较 ,最终选出满足要求的SBR处理工艺     

Selecting for Tolerance against Pathogens and Herbivores to Enhance Success of Reintroduction and Translocation

Abstract: Some species have insufficient defenses against climate change, emerging infectious diseases, and non‐native species because they have not been exposed to these factors over their evolutionary history, and this can decrease their likelihood of persistence. Captive breeding programs are sometimes used to reintroduce individuals back into the wild; however, successful captive breeding and reintroduction can be difficult because species or populations often cannot coexist with non‐native pathogens and herbivores without artificial selection. In captive breeding programs, breeders can select for host defenses that prevent or reduce pathogen or herbivore burden (i.e., resistance) or traits that limit the effects of parasitism or herbivory on host fitness (i.e., tolerance). We propose that selection for host tolerance may enhance the success of reintroduction or translocation because tolerant hosts generally have neutral effects on introduced pathogens and herbivores. The release of resistant hosts would have detrimental effects on their natural enemies, promoting rapid evolution to circumvent the host resistance that may reduce the long‐term probability of persistence of the reintroduced or translocated species. We examined 2 case studies, one on the pathogenic amphibian chytrid fungus ( Batrachochytrium dendrobatidis [Bd]) and the other on the herbivorous cactus moth ( Cactoblastis cactorum) in the United States, where it is not native. In each case study, we provide recommendations for how captive breeders and managers could go about selecting for host tolerance. Selecting for tolerance may offer a promising tool to rescue hosts species from invasive natural enemies as well as new natural enemies associated with climate change‐induced range shifts.     

Testing the presence of marine protected areas against their ability to reduce pressures on biodiversity

Marine protected areas (MPAs) are the preferred tool for preventing marine biodiversity loss, as reflected in international protected area targets. Although the area covered by MPAs is expanding, there is a concern that opposition from resource users is driving them into already low-use locations, whereas high-pressure areas remain unprotected, which has serious implications for biodiversity conservation. We tested the spatial relationships between different human-induced pressures on marine biodiversity and global MPAs. We used global, modeled pressure data and the World Database on Protected Areas to calculate the levels of 15 different human-induced pressures inside and outside the world's MPAs. We fitted binomial generalized linear models to the data to determine whether each pressure had a positive or negative effect on the likelihood of an area being protected and whether this effect changed with different categories of protection. Pelagic and artisanal fishing, shipping, and introductions of invasive species by ships had a negative relationship with protection, and this relationship persisted under even the least restrictive categories of protection (e.g., protected areas classified as category VI under the International Union for Conservation of Nature, a category that permits sustainable use). In contrast, pressures from dispersed, diffusive sources (e.g., pollution and ocean acidification) had positive relationships with protection. Our results showed that MPAs are systematically established in areas where there is low political opposition, limiting the capacity of existing MPAs to manage key drivers of biodiversity loss. We suggest that conservation efforts focus on biodiversity outcomes and effective reduction of pressures rather than prescribing area-based targets, and that alternative approaches to conservation are needed in areas where protection is not feasible.     

Perceptions, attitudes and interest of Swedish architects towards the use of wood frames in multi-storey buildings

Use of wood frames from sustainable forestry instead of non-wood frames in multi-storey buildings can reduce primary energy use and carbon dioxide emissions in construction. However, construction actors might have different perceptions towards wood frames than towards steel and concrete frames. Such perceptions may influence the actors’ decision to adopt wood frames. In this study we use a web-based questionnaire to assess Swedish architects’ perceptions, attitudes and interest towards steel, concrete and wood frames in multi-storey buildings (n = 412). Results indicate that the responding architects find concrete the most suitable frame material in buildings of 3-8 storeys, mainly because of the performance of concrete with regards to the engineering aspects (e.g. stability and fire safety) that were considered important in the choice of frame material. Although wood is considered the least suitable frame material, the overall attitude towards, and interest in, using wood is positive and related to the perceived environmental benefits of wood. This may derive from an increased discussion of and information about the environmental impact of buildings. Wood may be perceived as new and innovative while not considered as adequately proven as steel and concrete with regards to engineering aspects.     

Clogging of Filtering Material Systems Used for Disposable Respirators

The article shows the problem of clogging in connection with the parameters of filtering materials used in respiratory protective equipment. The results of investigations of airflow resistance changes during the depositing of dust inside the filtering material are presented. The configuration of layers differing in mass per unit area and the number of layers, were taken into consideration. For each configuration, the clogging abilities and the changes of airflow resistance as a reason of loading with dust were assessed. The analysis of tested materials confirms the hypothesis that there is an important coincidence between the properties of the material used in filtering equipment and the clogging coefficient. The results show that the filter should have a layered structure and that the outer layer should be made of a nonwoven of relatively high surface density.     

Ecological Trap for Desert Lizards Caused by Anthropogenic Changes in Habitat Structure that Favor Predator Activity

Abstract: Anthropogenic habitat perturbation is a major cause of population decline. A standard practice managers use to protect populations is to leave portions of natural habitat intact. We describe a case study in which, despite the use of this practice, the critically endangered lizard Acanthodactylus beershebensis was locally extirpated from both manipulated and natural patches within a mosaic landscape of an afforestation project. We hypothesized that increased structural complexity in planted patches favors avian predator activity and makes these patches less suitable for lizards due to a heightened risk of predation. Spatial rarity of natural perches (e.g., trees) in arid scrublands may hinder the ability of desert lizards to associate perches with low‐quality habitat, turning planted patches into ecological traps for such species. We erected artificial trees in a structurally simple arid habitat (similar to the way trees were planted in the afforestation project) and compared lizard population dynamics in plots with these structures and without. Survival of lizards in the plots with artificial trees was lower than survival in plots without artificial trees. Hatchlings dispersed into plots with artificial trees in a manner that indicated they perceived the quality of these plots as similar to the surrounding, unmanipulated landscape. Our results showed that local anthropogenic changes in habitat structure that seem relatively harmless may have a considerable negative effect beyond the immediate area of the perturbation because the disturbed habitat may become an ecological trap.     

Knowing But Not Doing: Selecting Priority Conservation Areas and the Research–Implementation Gap

Abstract: Conservation assessment is a rapidly evolving discipline whose stated goal is the design of networks of protected areas that represent and ensure the persistence of nature (i.e., species, habitats, and environmental processes) by separating priority areas from the activities that degrade or destroy them. Nevertheless, despite a burgeoning scientific literature that ever refines these techniques for allocating conservation resources, it is widely believed that conservation assessments are rarely translated into actions that actually conserve nature. We reviewed the conservation assessment literature in peer‐reviewed journals and conducted survey questionnaires of the authors of these studies. Two‐thirds of conservation assessments published in the peer‐reviewed scientific literature do not deliver conservation action, primarily because most researchers never plan for implementation. This research–implementation gap between conservation science and real‐world action is a genuine phenomenon and is a specific example of the “knowing–doing gap” that is widely recognized in management science. Given the woefully inadequate resources allocated for conservation, our findings raise questions over the utility of conservation assessment science, as currently practiced, to provide useful, pragmatic solutions to conservation planning problems. A reevaluation of the conceptual and operational basis of conservation planning research is urgently required. We recommend the following actions for beginning a process for bridging the research–implementation gap in conservation planning: (1) acknowledge the research–implementation gap is real, (2) source research questions from practitioners, (3) situate research within a broader conservation planning model, (4) expand the social dimension of conservation assessments, (5) support conservation plans with transdisciplinary social learning institutions, (6) reward academics for societal engagement and implementation, and (7) train students in skills for “doing” conservation.     

A meta‐heuristic approach for supporting adaptive disassembly sequencing using a multi‐objective concept

One of the key features of environmentally conscious manufacturing has been the efforts to promote product recycling and remanufacturing. Efficient material re‐utilisation through product disassembly to retrieve the desired parts and/or subassemblies is one rational approach. This is because it can promote the conservation of both material and energy resources whilst concurrently reducing environmental impact. However, because manufactured products may be made from many components, disassembly load becomes a critical factor that may obstruct the recovery of materials. Accordingly, it is essential to develop a practical method for deriving a disassembly plan to decrease such load, and to endow a certain value to the product at the end of its life cycle. With this understanding, the authors have developed a practical procedure to produce an adaptive disassembly strategy. The authors have applied a meta‐heuristic method known as genetic programming (GP) as a search engine to derive the adaptive disassembly sequence together with a multi‐objective optimisation method termed MOON^2R. The authors have also proposed a hierarchical sequencing method to cope with large/complex products and added several ideas to increase the applicability associated with the interests in disassembly of hazardous and/or valuable parts, and alternative disassembly actions. Through numerical experiments, the authors examined the effectiveness of the proposed approach by showing its support for relevant planning and design decisions for product recycling and remanufacturing from various viewpoints.     

Supplier assessment based on corporate social responsibility criteria in Indian automotive and textile industry sectors

Mandatory disclosure of corporate social responsibility (CSR) reporting forces supply chain members to consider CSR issues in developed countries. Researchers have viewed CSR content within different themes, such as human (social), ethical and environmental perspectives. So far, in India, very little research has been done to study the impact of human issues in employment (social), ethical issues in business operations and pollution (environmental) issues at both regional and specific sector level. This paper emphasises the perspective view of supplier selection, considering CSR issues as opposed to traditional methods using conventional selection criteria such as cost, quality, delivery and service. It employs six CSR criteria such as discrimination, abuse of human rights, child labour, long working hours, unfair competition and pollution to assess small- and medium-sized suppliers who produce and deliver products to the automotive and textile industry sectors. The results of this study indicate that to prevent discrimination against pay variation, minimise cases of abuse of human rights and incidence of child labour, suppliers must put in place proper policies and procedures regarding employment contract, identification and verification records. Furthermore, to reduce unfair competition, suppliers of both automotive and textile sectors may introduce processes for investigating reports of unethical conducts and take severe disciplinary action. The suppliers of both automotive and textile sectors believe that the competitive advantage can be achieved through environmental oriented business practices. However, they differ in their approaches in attaining this objective.