降流式厌氧悬浮填料床工艺特性分析

厌氧生物技术能在无氧条件下,通过厌氧微生物的新陈代谢将废水中的有机物转化为无机物,同时产生具有能源回收价值的甲烷,并减少温室气体(CO2)的排放,符合节能环保的原则和发展趋势.在回顾厌氧技术以及厌氧反应器发展的基础上,从现代厌氧反应器的发展理念角度分析了新型厌氧反应器-降流式厌氧悬浮填料床(DASB)的工艺特性.降流式厌氧悬浮填料床在生物量的保持、微生物的多级多相和推流流态等方面较好地符合了新型现代厌氧反应器的发展要求,结构、运行简单,具有较好的处理效果,是中国农村污水处理或预处理的较佳选择.     

Comparative study of microbial community structure in di erent filter media of constructed wetland

Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid (PLFA) composition. A total of 20 fatty acids in the range of C11 to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in di erent media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant di erences among the eight di erent media by Tukey’s honestly test. It was found that steel slag was significantly di erent in the microbial community as compared to other filter media, probably due to its alkaline e uent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis (PCA) showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.     

动态渗透压力法研究水处理滤料的润湿性

润湿性是水处理滤料的一个十分重要的表面性质.以Washburn方程为原理,用动态渗透压力法研究了无烟煤、铝矾土陶瓷及磁铁矿滤料的亲油亲水润湿性.实验结果表明,方法的重现性较好,误差在10%以内.当滤料的粒径范围在0.6～0.9mm之间时.以该法测得无烟煤、铝矾土陶瓷及磁铁矿滤料的亲油亲水比(LHR)值依次为2.511、1.748和1.317,说明无烟煤滤料的亲油性最好,铝矾土陶瓷次之,而磁铁矿的亲油性最差.XPS和FTIR分析结果表明,无烟煤、铝矾土陶瓷及磁铁矿滤料润湿性差别主要归因于其表面化学结构的不同.     

钙基脱硫剂孔隙网络动态生成特性

钙基脱硫剂孔隙结构特性直接影响到脱硫效果及脱硫剂的利用率,对其空间网络特性的描述将有助于分析SO2的扩散及反应特性. 在石灰石分解动力学和烧结机理的基础上,结合固体分解的成核机理,运用Monte-Carlo 方法,建立了脱硫剂孔隙网络的动态生成模型,对钙基脱硫剂分解形成的孔隙结构进行了动态模拟,并对生成孔结构的分形特性进行研究.结果表明,运用动态生成模型,可以给出石灰石分解形成的CaO内部孔隙的微观空间结构,且模拟生成的孔隙网络的分形维数与实验测定值基本吻合.     

地下水原位修复渗透性反应墙反应介质的改良与展望

渗透性反应墙(PRBs)是倍受关注的地下水原位修复技术之一,具有高效廉价、安装简便、维护简单等优点。详细总结了零价铁、活性炭、无机矿物材料和生物质材料等PRBs反应介质的结构、性能、适用范围、改良方法及增强吸附机制,介绍了PRBs技术在国内外地下水原位修复领域的工程应用实例,指出研发可再生型反应介质、深入研究复杂体系的污染物去除主导机制以及开展多介质混合、多种原位修复技术集成应用研究将是今后PRBs的主要研究方向。     

填料型A2/O工艺污水处理及反硝化除磷效能

填料型A~2/O工艺是在A~2/O工艺的基础上通过向厌氧池、缺氧池、好氧池中投加醛化纤维式组合填料,将传统活性污泥法与生物膜法相结合组成一套脱氮除磷的新系统,文章对填料型A~2/O工艺与传统A~2/O工艺处理生活污水的效果进行了对比研究,以及对该复合式工艺在不同硝化液回流比下反硝化除磷能力进行了分析.研究结果表明,相同条件下,填料型A~2/O工艺对生活污水的处理效果要优于传统A~2/O工艺,分别使COD和氨氮的去除率达到92.5%和93.1%.试验通过增加硝化液回流比的措施使得反硝化聚磷菌在填料上富集程度增大,当硝化液回流比为300%时,缺氧池的NO-3-N浓度为3.03 mg·L~(-1),吸磷量最大为26.28 mg·L~(-1),胞内聚合物PHB代谢活性最好,利用率最高为1.32 g·g~(-1)·L~(-1).体现了填料型A~2/O工艺具有显著的反硝化除磷效果.     

低渗透性多孔介质室内弥散实验及弥散度求解研究

低渗透多孔介质在浅部含隔水层中分布广泛,是地下水污染物迁移的重要载体,然而其弥散度的取值目前研究还不足。针对此问题,以溴化钠为示踪剂开展了低渗透多孔介质的室内弥散实验研究,介质渗透系数为0．048 m/d,通过离子选择电极法测定溴离子浓度,并分别采用解析法和数值法进行了弥散度的求解,解析法和数值法求得的弥散度分别为0．0048 m 与0．0065 m,研究成果可以为低渗透多孔介质中污染物迁移预测提供弥散度值参考。     

Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.     

氚在黏土矿物等多孔介质中的滞留机制

通过电感耦合等离子体光谱(ICP)、热重(TG)等分析方法对黏土矿物的结构成分、加热特性等进行了检测;通过蒸馏冷凝等实验,实现了对吸附后黏土矿物的吸附水、层间水、结构水的分离,检测了氚在黏土矿物结构内外各类型水中的分布;通过红外吸收光谱(IR)等分析方法对氚在黏土矿物结构中的吸附位置及形态进行了检测研究;通过同位素效应...     

介质材料在可渗透反应墙中的应用进展

可渗透反应墙正发展成为修复污染地下水技术的新方向,其中介质材料是可渗透反应墙成功修复污染地下水的关键。可渗透反应墙介质材料可以细分为还原型、吸附型、沉淀型和降解型介质材料等四类,并分别从不同类型的介质材料的反应机理、应用情况以及存在的问题等方面加以阐述。可渗透反应墙介质材料的选择应在其反应机理的基础上,结合实际的地下水环境条件、污染源、人类活动和经济费用等加以综合考虑,以保证可渗透反应墙长期有效经济安全地运行。