航天电子产品热环境试验策略研究

目的研究并给出行之有效的航天电子产品热环境试验策略。方法依据GJB 1027A和GJB 150A,借鉴MIL-STD-1540E和ECSS-E-10-03等国外标准,并结合多年航天型号任务电子产品热环境试验经验,研究给出试验类别、试验项目、试验余量、温度控制点选择、温度保持时间、试验顺序、产品性能测试要求、试验中断处理、再试验等方面的策略。结果研究提出的航天电子产品热环境试验策略,对卫星、飞船、导弹等武器装备电子产品热环境试验工作具有较强的指导和借鉴作用。结论科学合理的试验策略,不仅能够大大提高试验的有效性,还可以有效验证产品设计的正确性和提高产品可靠性。     

Use of recycled products in UK construction industry: An empirical investigation into critical impediments and strategies for improvement

Construction industry consumes about half of all material resources taken from nature, and generates a large portion of waste to landfill. A way of tackling negative environmental impacts impending from continuous material extraction and waste generation is the use of recycled materials for construction projects. However, the use of recycled materials is yet to become a commonplace in construction industry. This study evaluates the factors hampering the use of recycled products in UK construction industry as well as strategies that could be adopted to enhance its use in the industry. In order to identify the impediments and critical strategies, a two-fold methodical approach was used. An unstructured interview preceded a quantitative questionnaire survey which was used to elicit broader industry practitioners’ opinion.The study shows that designers rarely specify recycled products. This is due to lack of adequate information about quality and market availability of the products, negative perception from clients, and unexpectedly high cost of the products, despite its perceived low quality. The study suggests that a number of strategies could be adopted to promote the use of the products. These include allocation of points to the use of recycled products in sustainable design appraisal tools, governments legislative measures, improved collaboration between designers, contractors and materials suppliers, contractors involvement at earlier stage of design, improved education of the professionals about the products, and the use of tax break to influence the cost of the products. The findings of this study would therefore help policy makers, manufacturers and construction professionals to identify the factors hampering the use of recycled products for construction projects as well as the strategies that could be adopted in order to create market for the products.     

Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements

This article analyses the current and future end-of-life management of electronic displays (flat screen televisions and monitors), and identifies and discusses possible ecodesign recommendations to improve it. Based on an investigation of the treatment of displays in two typical European recycling plants, key aspects and criticalities of the recycling methods (sorting, dismantling and pre-processing) are identified. Disaggregated data concerning on-site measurements of the time needed to manually dismantle different displays are presented. The article also discusses the potential evolution of end-of-life scenarios for electronic displays and suggests possible recommendations for recyclers, producers and policy-makers to promote resource efficiency in the recycling of such waste products. Data on time for dismantling the displays can be used to build measurers for voluntary and mandatory policies, to stimulate design innovations for products improvement, and to assess possible alternative treatments of the waste during the pre-processing at the recycling plants. Some quantitative product measures (based on the time thresholds for dismantling some key components) are also discussed, including an assessment of their economic viability. These measures can potentially be enforced through mandatory and voluntary European product policies, and could also be extended to other product groups.     

超声萃取GC/MS法测定电子电气产品中12种邻苯二甲酸酯的含量

建立了超声萃取GC/MS法测定电子电气产品中12种邻苯二甲酸酯类增塑剂的方法。结果表明:该方法简单快速,灵敏度高,相对标准偏差小于10%,加标回收率为86%~109%;样品处理过程中采用化学毒性小的乙酸乙酯作为萃取溶剂,绿色环保。经过对多批次的各种电子电气产品中12种邻苯二甲酸酯分析测定,均得到满意结果。     

Sheep's wool insulation: A sustainable alternative use for a renewable resource?

Material selection in manufacturing may be characterized as a series of trade-offs between characteristics, properties, environmental impacts, sustainability, availability, and economics. Societal concerns about the environmental impacts of construction practices and materials have been expressed through an increase in the demand, production and use of “green” building products. This, combined with a desire to integrate more bioproducts and natural and renewable resources into the construction industry, has extended to the production and promotion of insulation made from sheep's wool.Although substantial literature exists on the insulation properties and other benefits of wool, less is known about the economics and manufacturing processes of sheep's wool insulation at varying scales of production. This paper contributes to this field of enquiry through presentation of the preliminary results of a wool insulation manufacturing pilot project, in which the scale and economics of the production of sheep's wool insulation were considered. Processing techniques, the impact of sheep breed, yield, energy use, and manufacturing costs were also examined. The results of the pilot project indicate that, while sheep's wool insulation produced at a smaller, or artisanal scale shows some potential, scale of operation and volume of production need to be carefully considered in order to ensure long-term sustainability of the operation. Using the least expensive sheep's wool available for the manufacture of wool batt insulation (and thereby reducing production costs) did not, in this pilot study, have a negative impact on productivity or product performance. Diversion of this waste stream of currently less marketable, and consequently less valuable wool, into the production of a green building material may offer small but significant benefit to sheep producers and the broader agricultural community, as well as consumers.     

“双碳”目标背景下我国绿色制造体系建设路径研究

绿色制造是一种与生态文明建设相协调的先进制造模式,把绿色理念和绿色工艺技术贯穿于制造业全产业链,追求从设计、制造、包装、运输、使用到报废处置整个生命周期中,环境影响最小化,资源利用最大化。2016年以来,我国绿色制造体系建设扎实推进,绿色产品、绿色工厂、绿色园区和绿色供应链全面发展,绿色制造产业不断发展壮大,有力地支撑了工业绿色低碳转型。本文总结了近年来我国绿色制造体系建设的主要进展,分析了未来绿色制造体系建设的重点方向和路径,新时期应该在碳达峰碳中和目标愿景下深入推进绿色制造体系建设,把增加绿色产品有效供给作为绿色制造体系建设的关键着力点,以数字化智能化为驱动提升绿色制造的广度和深度,同时不断深化绿色制造国际共识,提升我国制造业国际形象和影响力。最后从完善相关政策法规与标准体系、强化绿色低碳技术创新应用、构建产业生态体系和加强国际合作等方面提出了有关对策建议。     

太湖不同水域沉积物甲烷释放潜力及其途径分析

为明确太湖不同湖区CH4释放特征与释放潜力差异,采用水-气界面甲烷排放通量测定和室内厌氧培养,结合沉积物理化因子对太湖沉积物CH4释放特征及其释放潜力差异进行研究.结果 表明,不同湖区水-气界面CH4排放通量存在显著差异;不同湖区、不同深度沉积物中CH4释放潜力也存在明显差异,且CH4释放潜力与含水率和总有机碳呈正相关...     

生态产品价值实现的理论研究与实践进展

生态产品价值实现是推动“绿水青山”向“金山银山”转化的关键路径，近年来成为研究习近平生态文明思想的热点领域。本文就生态产品价值的内涵理解、实现机理、主要路径及具体实践模式，梳理了近年来国内学者的研究成果，并在此基础上总结与分析，指出存在的问题、提出相关建议。对生态产品价值的理解，目前国内学者从早期的分歧已逐步形成统一的认识，即生态产品本质上是人类从自然生态系统中直接或间接获取的物质和服务的总称，其价值来自生态系统服务价值。生态产品价值实现则是其存在价值通过各种路径被人类消费或使用，最终转化为经济收益或是民生福祉的过程。生态产品价值实现的基本路径主要包括产业发展、市场交易、金融扶持、政府调控和社会参与5种方式，国内目前的实践案例则可以归类为15种模式。但各地在实践过程中也面临生态产品识别边界不清晰、生态产品价值实现机理认识不统一、配套机制不完善以及路径模式创新与实践不够等问题，后续应加快建立生态产品调查统计与评估核算方法体系、完善自然资源产权制度、加强实践模式创新与推广应用。     

碳中和视域下的垃圾精细化治理：日本吸收性卫生用品回收体系的构建经验及启示

通过循环利用，减少吸收性卫生用品产量和废弃量的陡增所带来的碳排放量，将加速碳中和进程。日本提供了吸收性卫生用品回收体系构建的先行经验，即以“政府引导—企业运作—社会团体协作”为顶层架构，明确制度、完备设施、完善渠道、宣传到户等。建议我国取长补短，在夯实法律法规和优化主体协同机制的基础上，重点着眼于突破技术壁垒、推动智慧化监管、深化绿色理念，以点带面推进吸收性卫生用品的回收循环试点，进一步推动垃圾分类精细化治理的进程。