基于CREAM和贝叶斯网络的空管人误概率预测方法

针对研究管制人因可靠性时存在的模糊性和片面性问题,采用认知可靠性与失误分析方法（CREAM）中的扩展预测法,计算10项管制通用任务的人误概率;在此基础上,以管制行为形成因子作为根节点构建贝叶斯网络,建立其与情景控制模式的不确定关系模型,对管制员在多任务中的人误概率进行预测。研究结果表明:在由相同评判者给出行为形成因子影响效应的前提下,由CREAM扩展预测法和构建贝叶斯网络的方法预测得到的多数任务的人误概率差异较大,从方法的客观性、合理性和适用性角度分析,贝叶斯网络在研究该问题时更具优势。     

山西省绿色转型发展现状评价及路径研究

从经济、社会、资源、环境保护4个层面构建了切合山西省实际情况的绿色转型发展指标体系,采用熵权法及聚类分析方法对山西省的绿色转型发展现状进行了评价,根据评价结果,结合政策背景,提出了山西省实现绿色转型发展的路径,以实现山西省均衡快速的绿色转型发展。     

典型有机磷酸酯阻燃剂分析方法研究进展

有机磷酸酯(OPEs)是一类重要的有机磷阻燃剂,近些年逐渐取代了溴代阻燃剂,广泛应用于各行各业,也因此导致在多种环境介质中有较高的暴露量和潜在风险。已有研究表明,OPEs具有一定的毒理效应,对人体及其他生物均有潜在危害。本文综述了近年来国内外OPEs的检测技术,详述了不同环境介质OPEs的前处理方法。结果表明,目前固相萃取(SPE)和固相微萃取(SPME)仍是水样前处理的主要方法;对于固体样品,加速溶剂萃取/加压液相萃取(ASE/PLE)和微波辅助萃取(MAE)应用较多;虽然大气样品仍以固体吸附剂方式为主,但已向在线一体化方向发展;而生物样品的前处理方法多与水样和固体样品方法相似;但是对于复杂环境介质中OPEs样品的前处理较为困难,方法有待改善;气相色谱-质谱联用(GC-MS)和气相色谱-氮磷检测器(GC-NPD)对弱极性和易挥发的OPEs分析效果好,而强极性和难挥发的OPEs多用液相色谱-质谱联用(LCMS);气相色谱-质谱串联(GC-MS/MS)、液相色谱-质谱串联(LC-MS/MS)和高效液相色谱-质谱串联(UPLC-MS/MS)等对多种复杂的环境介质中的OPEs均有较好的检测分析效果,但并未普及。最后,对OPEs分析测试方法的发展趋势提出了展望。     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

基于VB6.0的供水管网震害预测方法和软件

为了提高供水管网震害预测的效率,修订了现有供水管网震害预测模型,应用Visual Basic 6.0软件平台,开发了供水管网震害预测软件。震害预测软件提供了两方面的预测功能,分别为不同地震烈度下供水管段基于三态的破坏等级预测和供水管网基于五态的破坏等级预测。软件实现了批量供水管段及整个管网的震害预测,且可以进行管网在设定地震下的震害预测,提高了预测效率。经算例分析,验证了软件的可靠性。     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Water Quality during Development and Apportionment of Pollution from Rivers in Tapeng Lagoon, Taiwan

This work investigated water samples collected from Tapeng Lagoon, Taiwan. Factor analysis was conducted to explain the characteristics and the variation in the quality of water during the disassembly of oyster frames and fishery boxes. The result shows that the most important latent factors in Tapeng Lagoon are the ocean factor, primary productivity factor, and the fishery pollution factor. Canonical discriminant analysis is applied to identify the source of pollution in neighboring rivers outside Tapeng Lagoon. The two constructed discriminant functions (CDFs) showed markedly contribution to all discriminant variables, and that total nitrogen, algae, dissolved oxygen and total phosphate, combined in the nutrient effect factor. The recognition capacities in these two CDFs were 95.6%, 4.4%, respectively. The water quality in the Kaoping river most strongly determined that in the Tapeng Lagoon the best is. And disassembling the oyster frames and fishery boxes improves the water quality markedly. However, environmental topographic conditions indicate that strengthening stream pollution prevention and to constructing another entrance to the ocean are the best approaches for improving the quality of water in Tapeng Lagoon, especially by reducing eutrophication. These approaches and results yield useful information concerning habitat recovery and water resource management.     

乌鲁木齐市采暖季空气质量变化趋势分析

为了定量评价乌鲁木齐市采暖季空气污染近五年的治理成效,给环境治理决策提供科学依据,运用回归分析方法,对乌鲁木齐市采暖季空气质量的浓度、级别和变化规律进行回归分析。分析结果表明,PM10、SO2、NO2三项污染物的浓度都有所下降,空气质量级别的污染天数呈现明显的月变化规律。乌鲁木齐市采暖季空气的重污染状况有所遏制,但SO2污染凸现,在下一步的治理工作中,加强尘污染治理的同时要加大对SO2的治理力度。