塑烧板除尘器在热轧带钢生产工况的应用

塑烧板除尘技术是除尘技术革命性的突破.作为新一代高效超细粉体收集器,它有传统除尘器所不具备的诸多优点.但是,在特殊工况下,塑烧板应用暴露出了很多问题.就塑烧板除尘器在2条热轧带钢生产线的使用对比,分析了塑烧板应用的注意事项.     

Utilization of pulp and paper industrial wastes to remove heavy metals from metal finishing wastewater

Two pulp and paper industrial wastes, lime mud (LM) and recovery boiler ash (RB), have low moisture contents, low heavy metal contaminations and contain various carbonate compounds which contribute to a high pH. Metal finishing wastewater (MF-WW) has a low pH, high levels of TDS and high contaminations from Cr, Cu, Pb and Zn. The heavy metals from MF-WW were removed by sorption and precipitation mechanisms. LM gave better results in removing heavy metals from MF-WW than RB. At a reaction time of 45 min, the maximum removal efficiencies for Cr (93%) and Cu (99%) were obtained at 110 g L⁻¹ of LM, but at 80 g L⁻¹ for Pb (96%) and Zn (99%). Treatment with LM gives a higher sludge volume than with RB. However, the leachability of heavy metals from LM is lower. Leachability of heavy metals in the sediment for all selected treatment conditions is within government standards.     

Effects of palm oil mill effluent media on cell growth and lipid content of Nannochloropsis oculata and Tetraselmis suecica

In this study, palm oil mill effluent (POME) was used as an alternative medium for algal biomass and lipid production. The influence of different concentrations of filtered and centrifuged POME in sea water (1, 5, 10 and 15%) on microalgal cell growth and lipid yield were investigated. Both Nannochloropsis oculata and Tetraselmis suecica had enhanced cell growth and lipid accumulation at 10% POME with maximum specific growth rate (0.21 d^–1 and 0.20 d^–1) and lipid content (39.1 ± 0.73% and 27.0 ± 0.61%), respectively, after 16 days of flask cultivation. The total Saturated Fatty Acid (SFA) (59.24%, 68.74%); Monounsaturated Fatty Acid (MUFA) (15.14%, 12.26%); and Polyunsaturated Fatty Acid (PUFA) (9.07%, 8.88%) were obtained for N. oculata and T. suecica, respectively, at 10% POME. Algal cultivation with POME media also enhanced the removal of Chemical Oxygen Demand (COD) (93.6–95%), Biological Oxygen Demand (BOD) (96–97%), Total Organic Compound (TOC) (71–75%), Total Nitrogen (TN) (78.8–90.8%) and oil and grease (92–94.9%) from POME.     

浅析造纸行业的清洁生产工艺及节能减排

简述了我国造纸业现状及面临的环境压力,介绍了我国清洁生产现状及发展趋势。针对造纸业＂消耗高、污染大、效率低＂的问题,结合实际造纸行业案例,提出了相应的清洁生产工艺和方案,以及关于大力发展造纸业清洁生产、促进节能减排的建议。     

造纸污泥的电渗透脱水效果

采用电渗透脱水技术对经过带式压滤后的制浆造纸混合污泥进行深度脱水,考察了机械压力、电压梯度和污泥厚度对污泥电渗透脱水效果与能耗的影响。结果表明,机械压力从25 kPa升至76 kPa时,脱水效果也会随之提高,但是继续增大机械压力对脱水效果的提高作用就会变得不明显;随着电压梯度的增加,脱水效果会有明显的升高,但是能耗也会相应地增加;电压梯度恒定为30 V/cm且污泥厚度从0.35 cm增加到1.40 cm时,脱水效果和能耗都会相应地增加。对于所有的电脱水实验,当污泥的含水率从74.85%降至60%时所需要的能耗均在0.14～0.28 kWh/kg去除水之间。综合考虑脱水效果和能耗,可认为最优脱水条件是：机械压力为76 kPa,电压梯度为30 V/cm,污泥厚度为0.7 cm。     

国内外造纸行业水污染排放标准比较研究

中国是造纸大国,制浆造纸在中国属于重污染行业。2008年国家发布的《制浆造纸工业水污染物排放标准》对整个行业可能排放的污染物提出了要求。本文通过将该标准与国外造纸行业相关的水污染物排放标准进行比较研究,找出我国标准与国外的差别,并为完善我国造纸行业水污染物排放标准提出建议。     

以废纸为原料制备煤尘抑制剂的合成及应用

采用碱化、醚化法制备了以废纸为原料的煤尘抑制剂,借助FTIR、SEM、TG-DTA及XRF等手段对合成物进行了表征,并将其用于抑制煤尘进行性能测试。结果表明,羧甲基纤维素的取代度为0.69;选用羧甲基纤维素含量为0.5g/mL的煤尘抑制剂进行应用实验,效果最佳。9 h内,喷洒含有羧甲基纤维素的煤尘抑制剂的煤样表面已经结壳,抗七级风,抑尘率在130 h都可保持在99%以上。在较高温燃烧条件下,煤尘抑制剂以H2O和CO2的形式失去,不会产生有害物质。     

Management of treated pulp and paper mill effluent to achieve zero discharge

Pulp and paper mills are one of the major effluent generating industries in the world. In most cases, mill effluent (treated or raw) is discharged back into a river, creek, stream or other water body; resulting in negative environmental impacts, as well as social concerns, among the downstream users. Pulp and paper mill effluent management, which could result in zero discharge into downstream water bodies, would present the best management option to address socio-environmental concerns. This paper presents such an effort aimed at closing the water cycle by using treated effluent from the mill to irrigate forage and fodder crops for producing animals feed. The treated effluent is delivered from the mill through gravity into a winter storage dam of 490ML capacity. For irrigation applications on 110ha of farmland, which is 42% of the total farmland, the water is pumped from the winter storage dam to five individual paddocks with Centre Pivot (CP) irrigators and one rectangular paddock with a Soft Hose Travelling (SHT) irrigator. From October 2001 to June 2006, a total of 2651mm of wastewater was applied at the farm. The impact assessment results, obtained from field monitoring, investigations and analysis, indicated that the closed water cycle effluent management strategy described had resulted in a lessening of the impact on water resources usually associated with paper mills. However, social attitudes to the use of crops that have been irrigated with recycled waters and the resulting impact on market value of the produce may still be a major consideration.     

Comments on "Ion adsorption components in liquid/solid systems"

Recently, Wu et al. (J Environ Sci 18(2006) 1167-1175) published a paper entitled as above. In the paper, the authors proposed a plotting method for describing adsorption isotherm, where adsorption density (q e) was plotted against the ratio of equilibrium concentration/particle concentration (Ce/W0) rather than (Ce) as traditionally defined. The authors claimed that this plot can eliminate the "particle concentration effect" (i.e., adsorption isotherm declines with increasing particle concentration), which may otherwise be inevasible with traditionally defined adsorption isotherms. We think that their conclusion is conceptually flawed and the plot may cause substantial inconstancy problems in practice.     

造纸废液生产单细胞蛋白

探讨生物法处理造纸黑液，单细胞蛋白是通过培养单细胞生物而获得的菌体蛋白质。利用产朊假丝鄄母Ｃ．ｕｔｉｌｉｓ发酵亚硫酸造纸液可生产ＳＣＰ作为动物饲料添加剂。