Removal of congo red and basic violet 1 by chir pine (Pinus roxburghii) sawdust,a saw mill waste: batch and column studies

The efficiency of chir pine sawdust (CPS) for adsorptive removal of the dyes, congo red (CR) and basic violet 1 (BV), from aqueous solution was evaluated using batch and column studies. The equilibrium was attained in 60 min for CR and 45 min for BV. The adsorption of BV obeyed the Langmuir isotherm model while the Freundlich isotherm fitted the equilibrium data of CR adsorption. The Langmuir monolayer adsorption capacities (Q_o) of CPS for BV and CR were 11.3 and 5.8 g kg^?1, respectively. The kinetic data for CR were best fitted to the Lagergren pseudo-first-order model and for BV to the pseudo-second-order model. The intra-particle diffusion was found to be the rate-controlling step for CR adsorption, while the adsorption kinetics of BV were controlled by both intra-particle and liquid-film diffusion. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The adsorption activation energy (E_a) for CR (124 kJ mol^?1) implied chemical adsorption while that for BV (5.4 kJ mol^?1) indicated physical adsorption. An increase in the Thomas model constant (K_Th) with increasing flow indicated that for both dyes the mass transport resistance decreased during adsorption. Thus, CPS may be an efficient low-cost adsorbent for decolorization of dye-containing wastewaters.     

Assessment of potentially toxic elements in Swiss chard and sediments of Akaki River,Ethiopia

For the determination of 15 potentially toxic elements (V, Cr, Fe, Mn, Co, Ni, Cu, Zn, As, Se, Ag, Cd, Sn, Hg, and Pb) in plant and sediment samples of the Akaki River, Ethiopia, inductively coupled plasma–mass spectrometry, inductively coupled plasma–optical emission spectrometry, and a RA-915+ mercury analyzer were applied. Sediment and plant samples were mineralized using a closed-vessel microwave-assisted digestion system. The elemental concentrations varied considerably in plant and sediment samples. The minimum concentration was observed for known toxic elements (As, Hg, and Cd) while the highest concentration was observed for the elements of relatively low toxicity Zn, Mn, and Fe. The concentration of Cr, Fe, Pb, Zn, and As in Swiss chard surpassed the maximum permissible levels at specific sites. At some of the sites, the sediment quality guidelines are surpassed for Cu, Zn, and Pb.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Ionic dye adsorption by zinc oxide nanoparticles

The adsorption behaviour of Basic Red 12, Acid Orange 7 and Acid Blue 1 on zinc oxide nanoparticles (ZNP) has been investigated to understand the physicochemical process involved and to explore the possible use of nanoparticles in the treatment and management of textile waste matter. The dye removal capacity of ZNP towards Basic Red 12, Acid Orange 7 and Acid Blue 1 was found to be 15.64, 6.78 and 6.38 mg g^?1, respectively. The adsorption process was pH dependent and optimum pH values of 9.0, 2.0 and 4.0 were obtained for Basic Red 12, Acid Orange 7 and Acid Blue 1, respectively. Equilibrium was established after 1.0 h for all dyes. Langmuir, Freundlich and Temkin isotherm models were applied to the system. The adsorbent ZNP was characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) and Fourier transform infrared (FTIR) techniques. SEM analysis revealed the noticeable nanoporous morphology of the material. The results of FTIR spectroscopy showed that the process is driven by an electrostatic complexation mechanism. XRD studies revealed the nanocrystalline structure of ZNP. BET surface area measurement suggested a high pore volume and large surface area for the adsorbent. The kinetic measurements suggested pseudo-second-order kinetic processes with high regression coefficients and smaller standard error of estimate values and lower residual sum of squares. The thermodynamic measurements suggested that all processes were exothermic and accompanied by negative values for Δ G⁰, Δ S⁰ and Δ H⁰.     

Long term changes in atmospheric N and S throughfall deposition and effects on soil solution chemistry in a Scots pine forest in the Netherlands

In a Scots pine forest the throughfall deposition and the chemical composition of the soil solution was monitored since 1984. (Inter)national legislation measures led to a reduction of the deposition of nitrogen and sulphur. The deposition of sulphur has decreased by approximately 65%. The total mineral-nitrogen deposition has decreased by ca. 25%, which is mainly due to a reduction in ammonium-N deposition (−40%), since nitrate-N deposition has increased (+50%). The nitrogen concentration in the upper mineral soil solution at 10 cm depth has decreased, leading to an improved nutritional balance, which may result in improved tree vitality. In the drainage water at 90 cm depth the fluxes of NO₃⁻ and SO₄²⁻ have decreased, resulting in a reduced leeching of accompanying base cations, thus preserving nutrients in the ecosystem. It may take still several years, however, before this will meet the prerequisite of a sustainable ecosystem.     

Preconcentration of cadmium and copper ions on magnetic core–shell nanoparticles for determination by flame atomic absorption

Magnetic core–shell nanoparticles modified by (3-aminopropyl) trimethoxy silane were prepared and used as adsorbent for the extraction and preconcentration of cadmium and copper ions. The ions were desorbed with nitric acid followed by determination with flame atomic absorption spectrometry. The extraction conditions were investigated systematically. The method was applied for the determination of Cd(II) and Cu(II) ions in different water samples. The accuracy was also evaluated through analysis of certified reference material.     

Exploration of spatial morphometry and socioeconomic variables in modelling urban land use change

The incorporation of land use (LU) data with socioeconomic data is a main issue in modelling. This is as a result of difference in data model and scale. This study proposed and tested the change–pattern approach, which allows the incorporation of these data sets in modelling LU change. Focusing on LU dynamics for a selected part of the Thames Gateway within the City of London, the approach tested two different methods of input selection for the modelling operations. Variables selected from these two methods serve as inputs into several neural networks tested in order to identify the direction of change for each of the LU types within the study area. The result shows that direction of LU change across the study area could be identified when spatial morphology of the area and socioeconomic variables are considered. Some classes of change could be identified fairly accurately using landscape metrics indicating level of fragmentation, extent of LU patches, shape complexity of LU patches in combination with some socioeconomic variables.     

Trait space of rare plants in a fire‐dependent ecosystem

The causes of species rarity are of critical concern because of the high extinction risk associated with rarity. Studies examining individual rare species have limited generality, whereas trait‐based approaches offer a means to identify functional causes of rarity that can be applied to communities with disparate species pools. Differences in functional traits between rare and common species may be indicative of the functional causes of species rarity and may therefore be useful in crafting species conservation strategies. However, there is a conspicuous lack of studies comparing the functional traits of rare species and co‐occurring common species. We measured 18 important functional traits for 19 rare and 134 common understory plant species from North Carolina's Sandhills region and compared their trait distributions to determine whether there are significant functional differences that may explain species rarity. Flowering, fire, and tissue‐chemistry traits differed significantly between rare and common, co‐occurring species. Differences in specific traits suggest that fire suppression has driven rarity in this system and that changes to the timing and severity of prescribed fire may improve conservation success. Our method provides a useful tool to prioritize conservation efforts in other systems based on the likelihood that rare species are functionally capable of persisting.     

松针生理性质对其富集多环芳烃行为的影响

测定了雪松(Cedrus deodar)和黑松(Pinus thunbergii)松针的脂含量、气孔密度和比表面积等生理性质及松针中多环芳烃 (PAHs)浓度,考察了松针生理性质对其富集PAHs行为的影响.结果表明,雪松松针中PAHs浓度高于黑松,其平均总浓度(ΣPAHs)分别为(1101±692)ng/g和(518±339)ng/g,2种松针对PAHs的富集能力有较大差异,脂含量是决定松针富集PAHs量的首要因素.2种松针中PAHs组成均以3环和4环PAHs为主,分别占ΣPAHs的56%和31%以上.松针对于3环PAHs的富集能力强于4环PAHs,两者浓度差异约为2倍左右;对于5、6环PAHs,未发现其浓度与脂含量之间的相关关系.由于雪松和黑松松针的脂含量随比表面积具有不同的变化趋势,2种松针中PAHs浓度随比表面积的变化趋势相反.对于5、6环PAHs,松针比表面积和气孔密度对其浓度有显著影响.