Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

人群密度对人群拥挤事故的影响

为了研究公共场所的人群密度与拥挤事故的发生概率.基于连续人群流动模型,从人群密度角度探讨了人群拥挤事故发生的机理.由于不同民族个体生理尺寸的差异,人群最大忍受密度不同,以此作为判断人群拥挤事故的标准,并结合我国情况提出我国人群最大忍受密度为9人/m2.最后模拟了某个拥挤事故场景,用该模型对其进行拥挤事故分析.结果表明,连续人群流动模型可以用于预测拥挤事故的发生,对预防和控制人群拥挤事故具有一定的指导意义.     

WPSTM-TEOMTM-MOUDITM的对比及大气气溶胶密度研究

通过对2005年夏季上海、北京地区大气气溶胶观测中3种不同原理气溶胶分析及采样仪的对比,考察了颗粒物个数浓度粒径分布仪（WPS^TM）、锥形元件振荡微量天平（TEOM^TMTM）在运行中所得数据的可比性.其中TEOM^TM测量PM_2.5质量浓度与WPS^TM计算PM_2.5质量浓度数据的相关系数分别为0.77和0.79,并发现在粗粒子颗粒物比例较高的时段二者相关性分别提高为0.91和0.84.MOUDI^TM分级质量浓度与WPS^TM计算分级质量浓度数据对比显示,除最小粒径分级外其他分级均有较好相关性（R分布在0.76～0.92）.应用2组不同对比数据推测了上海和北京观测点PM_2.5颗粒物密度,研究发现上海采样点颗粒物密度约为1.70 g·cm^-3,而北京采样点颗粒物密度约为1.50 g·cm^-3.     

Variation of soil fertility and carbon sequestration by planting Hevea brasiliensis in Hainan Island, China

The development of rubber industry depends on the sustainable management of rubber plantation. To evaluate the environmental effects of planting Hevea brasiliensis on a subsystem of tropical forest ecosystem, the variation of soil fertility and carbon sequestration under rubber plantation within 30-year life period were investigated in Hainan Island. Results showed that （1） with the increase of stand age of rubber plantation, soil fertility decreased all along. From 1954 to 1995, soil organic matter, total N, available K and available P decreased by 48.2%, 54.1%, 56.7% and 64.1%, respectively. （2） If the complete return of litters was considered without additional fertilizer application to the soil of the rubber plantations, the consumption periods for P, N, K, Mg were only 825 years, 329 years, 94 years and 65 years, respectively~ To improve soil fertility is essential for rubber plantation development. （3） The C sequestration of rubber trees per hectare accounts for 272.08 t within 30-year life period and 57.91% of them was fixed in litters. In comparison with C sequestration by rain forest （234.305 t/hm^2） and by secondary rain forest （150.203 t/hm^2）, rubber forest has more potentials for C fixation. On the base of above results, the following measures would benefit the maintenance of soil fertility and the development of rubber industry, including applying fertilizer to maintain the balance of soil nutrients, intercropping leguminous plant to improve soil fertility, reducing the collection of litters, optimizing soil properties to improve element P availability such as applying CaCO3. The information gathered from the study can be used as baseline data for the sustainable management of rubber plantation elsewhere.     

基于卫星遥感与地面监测分析北京大气NO_2污染特征

分析了1999—2010年北京大气NO2地面质量浓度、2004年以来北京及周边NO2柱浓度的变化.结果表明：1999—2007年来北京大气NO2质量浓度以升高为主.2008年实施奥运空气质量保障措施极大地缓解了北京NO2污染状况,地面质量浓度与垂直柱浓度都出现不同程度的回落.2009年北京大气NO2污染又有所反弹,但低...     

电化学产电菌的分离及性能评价

利用兼性滚管法分离了折流板空气阴极微生物燃料电池(BAFMFC)A、B两格室的阳极生物膜,共获得19株纯菌.将菌株投加至无菌立方型反应器中,检验其产电特性.利用交流阻抗法测量各纯菌电池的内阻,结果显示38个电池的欧姆内阻为25Ω±5Ω,说明了各电池的产电差异来源于菌株本身的活性.其他运行条件均保持不变,在1000Ω外阻下,7株纯菌电池的输出电压在200mV以上.其中,A格室产电活性最高的菌株(A2)产生的最大电压为328mV,输出的最大功率密度为165.1mW/m2,B格室产电活性最高的菌株(B1)最大电压为241mV,最大功率密度为214.4mW/m2.原子力显微镜和脂肪酸快速鉴定表明,A2为肠杆菌科的杆菌,B1为厚壁菌门的芽孢杆菌.     

光温条件和pH对浮萍生长及磷吸收的影响

试验以长江三角洲地区常见的稀脉浮萍和少根紫萍为研究对象.在Hoagland's E-Medium营养液进行实验室模拟培养的基础上,研究了光温条件以及pH对两种浮萍生长和磷去除能力的影响.结果表明,在1500-6000 1x光照强度范围内,光照越强,两种浮萍的生长和磷去除能力越强;在10-35℃温度范围内,两种浮萍生长和...     

卫生填埋场黏土衬层密实性试验研究

开展卫生填埋场中的黏土衬层密实性试验研究对填埋场的工程设计和后期运营具有现实意义.黏土压实的直接影响之一就是孔隙率的减小,并改变黏土的电阻率,为高密度电阻率法在衬层密实性中的调查研究提供了前提条件和物理基础.文章采用高密度电阻率法三种装置(测深、温纳、偶极-偶极)进行对比测量,通过电阻率成像技术对压实黏土的电性特征进行...     

毒性有机物BPA与普通小球藻的相互影响特性研究

考察了不同浓度双酚A(BPA)对普通小球藻(Chlorella vulgaris)生长特性的影响,以及普通小球藻生长过程对BPA的去除效能.研究表明,低浓度BPA(0~20 mg·L-1)对普通小球藻生长具有促进作用,而高浓度BPA(20~50 mg·L-1)对普通小球藻生长具有抑制作用,且抑制效应与BPA浓度呈正相关关系.低剂量BPA(<20 mg·L-1)对叶绿素含量并无明显的影响,高剂量BPA(>20 mg·L-1)造成叶绿素含量降低.在BPA初始浓度2~50 mg·L-1的范围内,普通小球藻对其都有一定的去除效能,单位普通小球藻对BPA去除速率与其初始浓度呈正相关关系.BPA投加量为50 mg·L-1时,BPA去除速率最大,且最大速率出现于延滞期与对数期之间.     

以预处理剩余污泥为燃料MFC产电性能及不连续供电的可行性

为探讨微生物燃料电池(microbial fuel cell,MFC)处理经预处理后剩余污泥的可行性以及不连续供电能力,采用双室MFC,以剩余污泥热处理上清液为基质进行启动和运行,通过改变电池阴极电子受体而导致电势差变化来监测其产电的运行稳定性.结果表明,反应器以氧气作为阴极电子受体148 h后启动成功,最大输出电压0.24 V,将阴极电子受体换为铁氰化钾时,能获得0.66 V的最大输出电压和4.21 W·m~(-3)的最大功率密度.当将阴极电子受体分别替换为氧气或者开路,又转换为铁氰化钾后,电池输出功率恢复迅速,电池对有机物去除效率基本不受影响,对化学需氧量(COD)、氨氮去除效率分别达70%和80%.本研究表明,利用预处理剩余污泥进行MFC处理和产电是可行的,可获得较高的功率密度,同时MFC可以实现不连续供电.