泡沫聚合物保温材料的研究进展及其应用

综述了以聚氨酯泡沫、聚乙烯泡沫和酚醛泡沫塑料为代表的轻质聚合物泡沫保温材料的发展状况。     

聚合铝铁对A2/O系统 EPS及生物絮凝性能的影响

通过向实验室构建的A2/O模型好氧池末端投加聚合铝铁(PAFC)来强化系统的生物除磷,使得出水总磷达到《城市污水处理厂污染物排放标准GB 18918-2002》中的一级A标准,并重点分析投加的PAFC对A2/O系统中活性污泥胞外聚合物(EPS)和活性污泥生物絮凝性能的影响.结果表明,随着PAFC投药量的增加,A2/O系统活性污泥EPS总量变化不大,但EPS组分中蛋白/多糖含量的比值逐渐降低,由投药前的3.30降低至投药后的2.30;EPS中金属离子含量逐渐增加,在厌氧-缺氧-好氧的运行周期内,各处理单元污泥的EPS中金属铝离子含量增加.投加PAFC后,活性污泥颗粒变大,二沉池出水的Zeta电位明显降低,由投药前-15.83 mV降低至-21.20 mV,污泥产量增加.因此,适量投加PAFC后,生物絮凝性能得到改善,出水中悬浊颗粒减少,出水水质变好.     

Biodegradation of Injection Molded Starch-Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) Blends in a Natural Compost Environment

Injection molded specimens were prepared by blending poly (hydroxybutyrate-co-valerate) (PHBV) with cornstarch. Blended formulations incorporated 30% or 50% starch in the presence or absence of poly-(ethylene oxide) (PEO), which enhances the adherence of starch granules to PHBV. These formulations were evaluated for their biodegradability in natural compost by measuring changes in physical and chemical properties over a period of 125 days. The degradation of plastic material, as evidenced by weight loss and deterioration in tensile properties, correlated with the amount of starch present in the blends (neat PHBV < 30% starch < 50% starch). Incorporation of PEO into starch-PHBV blends had little or no effect on the rate of weight loss. Starch in blends degraded faster than PHBV and it accelerated PHBV degradation. Also, PHBV did not retard starch degradation. After 125 days of exposure to compost, neat PHBV lost 7% of its weight (0.056% weight loss/day), while the PHBV component of a 50% starch blend lost 41% of its weight (0.328% weight loss/day). PHB and PHV moieties within the copolymer degraded at similar rates, regardless of the presence of starch, as determined by ¹H-NMR spectroscopy. GPC analyses revealed that, while the number average molecular weight (Mn) of PHBV in all exposed samples decreased, there was no significant difference in this decrease between neat PHBV as opposed to PHBV blended with starch. SEM showed homogeneously distributed starch granules embedded in a PHBV matrix, typical of a filler material. Starch granules were rapidly depleted during exposure to compost, increasing the surface area of the PHBV matrix.     

聚合物材料在快速原型制造技术中的应用

介绍聚合物材料作为成形原料在主要的快速原型制造(RPM)工艺中的应用情况。具体按照立体印刷成形(SLA)、层合实体制造(LOM)、选域激光烧结(SLS)及熔融沉积造型(FDM)这4种工艺的不同,阐述与各工艺对应的聚合物材料的种类、聚合物材料成形过程中可能出现的问题及解决方案。总结了聚合物材料原型的应用情况和聚合物材料在RPM技术应用中存在的问题。     

聚己内酯与聚羟基丁酸戊酸酯的脱氮性能对比

以可生物降解聚合物聚己内酯(PCL)和聚羟基丁酸戊酸酯(PHBV)作为反硝化缓释碳源和微生物载体,利用清水释碳和批式反硝化试验选出适用于再生水反硝化深度脱氮生物滤池的可生物降解碳源滤料,通过比较与分析碳源滤料的表面形态及物质特性和附着微生物的群落特征揭示其性能优越的原因.结果表明,PHBV反硝化启动时间短,反硝化速率高,剩余有机物浓度低,相比PCL具有更稳定持续的反硝化效果.原因是其表面粗糙,且含有大量C—O和CO等亲水性基团,易于微生物附着和降解利用;其表面附着的微生物种类多样,其中发硫菌属(Thiothrix)、假单胞属(Pseudomonas)、菌胶团属(Zoogloea)、黄杆菌属(Flavobacterium)和脱氯菌属(Dechloromonas)等优势菌属均具有异养反硝化功能.因此,PHBV更适合作为再生水反硝化深度脱氮生物滤池的碳源滤料.     

丁苯橡胶生产过程中不稳定因素分析及对策

针对丁二烯自聚物闪燃爆炸和后处理胶粒塑化着火的形成机理、形成条件、影响因素进行了分析,并提出了防范措施和应急处理办法。     

Molecularly imprinted polymer for analysis of trace atrazine herbicide in water

A molecularly imprinted polymer (MIP) for atrazine was synthesized by non-covalent method. The binding capacity of MIP was 1.00 mg g^{? 1} polymer. The selectivity and recovery were investigated with various pesticides which are mostly, found in the environment, for both similar and different chemical structure of atrazine. The competitive recognition between atrazine and structurally similar compounds was evaluated and it was found that the system provided highest recovery and selectivity for atrazine while low recovery and selectivity were obtained for the other compounds. The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP), a commercial C₁₈ and a granular activated carbon (GAC) sorbent. The method provided high recoveries ranged from 94 to 99% at two spiked levels with relative standard deviations less than 2%. The lower detection limit of the method was 80 ng L^{? 1}. This method was successfully applied for analysis of environmental water samples.     

天然胶/公共网络/废胶粉互穿聚合物网络

通过互穿聚合物网络技术成功制备了天然橡胶/公共网络/废胶粉共轭三组分,并测定了力学性能和微观形态。结果表明:当A/B摩尔比为2/1、AB含量为4.5%、废胶粉粒径为60目、废胶粉含量为15%时,体系的力学性能最好,共轭三组分天然橡胶/公共网络/废胶粉体系的磨耗体积明显低于两组分天然橡胶/废胶粉体系的磨耗体积。界面共轭互穿改善了界面结合,可减少反复压缩过程中的相间摩擦生热和变形。     

磁性纳米铁对厌氧颗粒污泥特性及其微生物群落的影响

考察了磁性纳米铁(Fe3O4NPs)对厌氧颗粒污泥溶解性微生物产物(SMP)、疏松胞外聚合物(LB-EPS)、紧密胞外聚合物(TB-EPS)的影响,同时利用高通量测序技术对厌氧颗粒污泥内微生物群落结构的变化进行了分析.结果表明,在长期接触实验过程中,投加Fe3O4NPs的反应器对COD去除率为83.6%,与对照组相比降低了5.7%.对照组与实验组中厌氧颗粒污泥TB-EPS含量(以VSS计)分别为178.20 mg·g-1和138.24 mg·g-1,而SMP含量分别为34.88 mg·L-1和27.44 mg·L-1;同时投加Fe3O4NPs后,在LB-EPS三维荧光(EEM)光谱中,紫外光区类腐殖酸荧光峰消失,辅酶F420荧光峰强度有所降低.在长期接触实验后,甲烷杆菌属(Methanobacterium)所占比例从76.15%增至86.76%,而甲烷丝菌属(Methanothrix)所占比例从17.1%降至7.51%,Methanothrix对于Fe3O4NPs更为敏感;总细菌群落变化明显,其中变形菌门(Proteobacteria)所占比例从66.44%降至47.16%,放线菌门(Actinobacteria)所占比例从8.97%增至17.33%,拟杆菌门(Bacteroidetes)所占比例从8.07%增至17.74%,厚壁菌门和拟杆菌门比例的增加对有机物的厌氧水解过程发挥积极的作用.     

木质膜耦合聚合物膜的重力驱动膜过滤系统增强水源水中重金属的去除及机制

针对聚合物膜的重力驱动膜过滤系统(gravity-driven membrane filtration system,GDM)对水源水中重金属去除效率低的问题,将其与木质膜(wood membrane,WM)耦合,以环保且廉价的方式提高重金属的去除效率。本研究比较了木质膜耦合聚合物微滤(microfiltration,MF)膜的GDM系统(GDM1)和聚合物微滤膜GDM系统(GDM2)对水源水中重金属的去除效能及机制。与GDM2相比,GDM1系统在木质膜的作用下,其微滤膜(GDM1-MF)上的生物膜更薄并呈现出更疏松的网状结构,因此,膜阻力更低,稳定通量更高。稳定运行后,GDM1系统对水中Fe、Mn和Cu的去除率分别达到67%、43%和59%,均高于GDM2(64%、15%和36%)。这是由于GDM1系统生物膜胞外聚合物(extracellular polymeric substances,EPS)中蛋白含量以及—OH和—COOH基团更多,更有利于截留重金属。此外,GDM1-MF中存在更多的锰氧化细菌、酸杆菌门Acidobacteriota和黄杆菌属Flavobacterium,促进了Mn和Cu的去除。本研究为利用GDM系统去除水中重金属提供了新的思路和方法,对推动利用GDM系统处理重金属污染水源水的应用具有重大意义。