Preparation and emission characteristics of ethanol-diesel fuel blends

The preparation of ethanol-diesel fuel blends and their emission characteristics were investigated. Results showed the absolute ethanol can dissolve in diesel fuel at an arbitrary ratio and a small quantity of water(0.2% ) addition can lead to the phase separation of blends. An organic additive was synthesized and it can develop the ability of resistance to water and maintain the stability of ethanol-diesel-trace amounts of water system. The emission characteristics of 10%, 20%, and 30% ethanol-diesel fuel blends, with or without additives, were compared with those of diesel fuel in a direct injection(DI) diesel engine. The experimental results indicated that the blend of ethanol with diesel fuel significantly reduced the concentrations of smoke, hydrocarbon(HC), and carbon monoxide(CO) in exhaust gas. Using 20% ethanol-diesel fuel blend with the additive of 2% of the total volume, the optimum mixing ratio was achieved, at which the bench diesel engine testing showed a significant decrease in exhaust gas. Bosch smoke number was reduced by 55%, HC emission by 70%, and CO emission by 45%, at 13 kW/1540 r/min. However, ethanol-diesel fuel blends produced a few ppm acetaldehydes and more ethanol in exhaust gas.     

Advanced superhydrophobic electroactive fluorinated polyimide and its application in anticorrosion coating

A novel superhydrophobicelectroactive fluorinated polyimide (HEFPI) was first synthesized from aniline trimer and 4,4′-(Hexafluoroisopropylidene) diphthalic anhydride. The HEFPI could be fabricated as superhydrophobicfilm by replicated the surface of the Xanthosomasagittifolium leaves. The water contact angle of HEFPI film reaches as high as 157 ° and the superhydrophobic property of HEFPI could coat on cold-rolled steel (CRS) to prevent the metal corrosion. Electroactivity of EFPI was evaluated by performing electrochemical cyclic voltammetry study. Besides, redox catalytic capabilities of aniline trimer units existed in HEFPI main chain may induce the formation of passive metal oxide layers on the CRS electrode. The synergistic effects (hydrophobic property and passive metal oxide layers) make the HEFPI coating has great potential for advanced anticorrosion material.     

Nafion交换剂富集-石墨炉原子吸收法测定废水中铬

本文用Nafion交换剂富集-石墨炉原子吸收法测定废水中的Cr(Ⅲ)和Cr(Ⅵ),富集底液选用0.01mol NaAc-HAc缓冲液(pH=4.5),测定线性范围为5—100ng/ml,回收率在92—106％之间。对含Cr(Ⅲ)量为25ng/ml试样溶液进行十次平行测定,相对标准偏差为5.9％,特征浓度为2.4ng/ml Cr(Ⅲ),十多种共存离子不干扰测定。     

一种染料废水脱色絮凝剂(PSAM)的制备和效果实验

制备了一种含有金属离子的聚硅酸脱色絮凝剂(简称PSAM)。试验了它对染料废水的脱色效果及对高岭土悬浊液的去浊效果,并与PAC的去浊效果进行了比较。考察了影响PSAM絮凝及脱色效果的因素。实验结果表明,pH在5.5—10.5范围内,PSAM具有良好的去浊效果。PSAM的两个最佳脱色区,在pH为6～8,和pH为13.0左右。与PAC相比,PSAM除具有良好的絮凝效果外,还具有良好的脱色效果。     

含铬钻井泥浆固化及影响因素

固化技术是含铬钻井泥浆无害化处理最有效的方法。以四川西部某钻井泥浆为研究对象,选取水泥、石灰、聚铝和水玻璃作为固化处理剂,运用正交试验研究了含铬钻井泥浆实验条件。最佳试验配方是：先将泥浆含水率调整为46%,水泥、聚铝、石灰和水玻璃的添加量分别为10%、1%、3%和0.5%。固化72 h,该试验配方对六价铬和总铬的固化率分别达到93%和95%,浸出六价铬浓度符合地下水三类水标准(GB/T14848-9),浸出总铬浓度符合国家污水综合排放标准（GB5085.3-1996）。     

聚合铝混凝过程中pH值的计算与调控

本文通过对混凝过程中典型酸碱平衡体系进行分析,提出了对无机离分子絮凝剂聚合铝（PACl）混凝过程中混凝剂投药量与pH值变化关系进行近似计算的方法,并引入了混凝过程水解度的概念。而后根据实验结果进行了进一步的修正。     

Aromatic Copolyester-based Nano-biocomposites: Elaboration, Structural Characterization and Properties

Biodegradable polymers are one of the most promising ways to replace non-degradable polymers. But, to be a real alternative to classical synthetic polymers and find applications, biopolymer (biodegradable polymer) properties have to be enhanced. Nano-biocomposites, which are obtained by incorporation of nanofillers into a biomatrix, are an interesting way to achieve these improvements. Modified and unmodified montmorillonites have been introduced into a biodegradable aromatic copolyester, poly(butylene adipate-co-terephthalate) (PBAT). Structural characterization, thermal and mechanical tests have been carried out to understand better the relations between the nanofillers structuring and the final nano-biocomposite properties. Main results show that clay incorporation and the obtained intercalated structures improve PBAT properties (enhanced thermal stability, increased stiffness) and thus may increase the attractiveness of this biopolymer.     

两性高分子水处理剂的研究进展

本文综述了近年来国内外两性高分子水处理剂的研究进展,并对今后的研究工作提出了一些建议.     

改性天然高分子絮凝剂和聚合氯化铝复合沉降与絮体分形

在改性天然高分子絮凝剂(CMS)和聚合氯化铝(PAC)复合处理有机废水絮体沉降速度的实验中,用显微镜和电镜观察到絮凝物是有自相似特征的不规则形状,具有分形特征.在pH值为6.86、聚合氯化铝(PAC)加入量为80mg/L条件下,天然改性高分子药剂加入量为1.5mg/L时沉降效果最好,与单独加入PAC相比20min时平均沉降速度分别为2.6mm/min和1.7mm/min.并计算出此时复合处理形成絮凝体的分维数为1.70.     

共混塑料在海水中的光降解及海洋环境风险

共混塑料因其用途广泛且价格低廉,生产和使用量逐渐增加,然而共混塑料在海水中光降解及其海洋环境风险尚不明确.选取聚丙烯/热塑性淀粉共混塑料（PP/TPS）和聚乳酸/对苯二甲酸-己二酸丁二醇酯/热塑性淀粉共混塑料（PLA/PBAT/TPS）为研究对象,单一聚合物塑料聚丙烯（PP）和聚乳酸（PLA）作为对照,探究共混塑料在海水中光降解后微塑料（MPs）的形成和物理化学性质的变化.MPs的粒径分布显示,与PP和PLA相比,PP/TPS和PLA/PBAT/TPS光降解后容易产生尺寸更小的颗粒,主要原因是共混塑料机械性能和抗紫外线能力较差.共混塑料光降解后表面出现更多裂纹和褶皱,表面形貌发生明显变化,而PP和PLA变化不明显.ATR-FTIR光谱显示PP/TPS和PLA/PBAT/TPS光降解后热塑性淀粉（TPS）的特征峰减小,表明共混塑料的淀粉组分降解.C 1s光谱表明,老化共混塑料含有更少的—OH,进一步证实了TPS的光降解.以上结果表明PP/TPS和PLA/PBAT/TPS比PP和PLA光降解程度更高,从而产生更多小粒径MPs.综上所述,共混塑料可能比单一聚合物塑料对海洋环境风险更高,对共混塑料的生产和使用应谨慎.