GA-g-PAMPS/AA/ST凝胶的制备及对亚甲基蓝吸附性能

采用微波辐射技术,通过接枝共聚反应制备了阿拉伯胶（GA）-g-2-丙烯酰胺-2-甲基丙磺酸（AMPS）/丙烯酸（AA）/海泡石黏土（ST）（GA-g-PAMPS/AA/ST）复合水凝胶,利用FTIR、XRD、SEM对复合水凝胶进行了表征,研究了水凝胶对水溶液中亚甲基蓝（MB）染料的吸附性能.结果显示：GA、ST和AA与AMPS发生了接枝共聚反应,形成具有均匀三维网络结构的复合水凝胶.0.025g水凝胶可以使体积为50mL、pH值为6.4、浓度为600mg/L的MB溶液的吸附量和吸附率分别达1146mg/g和95.5%,水凝胶具有较好的重复利用性能.Freundlich等温模型和准二级动力学模型能更好地描述吸附过程.热力学研究表明水凝胶对亚甲基蓝吸附是自发、吸热和不可逆的过程.该水凝胶可用作阳离子染料和阳离子型污染物的潜在候选生物质吸附剂.     

二氧化钛对地下水中砷硅的吸附及再生回用

二氧化钛(TiO_2)材料作为性能优异的吸附材料被广泛应用于地下水砷(As)的去除中.结果表明,地下水中共存硅离子(Si)会占据TiO_2的吸附位点,从而影响As的吸附及TiO_2材料的再生回用.本文通过同步辐射扩展X射线吸收精细结构(EXAFS)研究了Si对As微观吸附机制的影响,表明Si的存在不会影响As在TiO_2上的吸附构型.衰减全反射傅里叶变换红外光谱(ATR-FTIR)原位研究表明Si在TiO_2表面形成Si单体、低聚体和多聚体,从而竞争As的吸附位点,同时增加TiO_2再生的难度.为了实现TiO_2材料的高效再生,本研究进一步考察了氟化钠(NaF)对TiO_2表面Si的脱附效果,发现NaF可以有效地洗脱Si,再生后的TiO_2吸附性能稳定.ATR-FTIR光谱原位分析发现,NaF的加入可有效脱附TiO_2表面的Si单体和多聚体.当利用NaF和Na OH共同洗脱TiO_2表面的As和Si时,3次循环中As的脱附率为86.8%~100.3%,Si的脱附率为67.9%~82.0%.本研究为地下水砷硅共吸附材料的再生提供了一种有效方法.     

Hydrolyzed Al(Ⅲ) clusters: Speciation stability of nano-Al13

Pure nano-Al13 and aggregates at various concentrations were prepared to examine the particle size effect of coagulation with inorganic polymer fiocculant. The property and stability of various species formed were characterized using Infrared, 27Al-NMR,photo correlation spectroscopy (PCS), and Ferron assay. Results showed that concentration and temperature exhibited different roles on the stability of Al13. The quantity of Alb species analyzed by ferron assay in the initial aging period corresponded well with that of Al13, which has been confirmed in a dimension range of 1-2 nm by PCS. Al13 solutions at high concentrations (0.5-2.11 mol/L)were observed to undergo further aggregation with aging. The aggregates with a wide particle size distribution would contribute to the disappeared/decreased Al13 basis on the 27Al-NMR spectrum, whereas a part of Al13 would still remain as Alb. At low concentrations,Al13 solution was quite stable at normal temperature, but lost its stability quickly when heating to 90°C.     

Adsorptive removal of hydrophobic organic compounds by carbonaceous adsorbents: A comparative study of waste-polymer-based, coal-based activated carbon, and carbon nanotubes

Adsorption of the hydrophobic organic compounds (HOCs) trichloroethylene (TCE), 1,3-dichlorobenzene (DCB), 1,3-dinitrobenzene (DNB) and γ-hexachlorocyclohexane (HCH) on five different carbonaceous materials was compared. The adsorbents included three polymer-based activated carbons, one coal-based activated carbon (F400) and multiwalled carbon nanotubes (MWNT). The polymerbased activated carbons were prepared using KOH activation from waste polymers: polyvinyl chloride (PVC), polyethyleneterephthalate (PET) and tire rubber (TR). Compared with F400 and MWNT, activated carbons derived from PVC and PET exhibited fast adsorption kinetics and high adsorption capacity toward the HOCs, attributed to their extremely large hydrophobic surface area (2700 m²/g) and highly mesoporous structures. Adsorption of small-sized TCE was stronger on the tire-rubber-based carbon and F400 resulting from the pore-filling effect. In contrast, due to the molecular sieving effect, their adsorption on HCH was lower. MWNT exhibited the lowest adsorption capacity toward HOCs because of its low surface area and characteristic of aggregating in aqueous solution.     

磁性离子印迹聚合物的制备及其对水中Pb(Ⅱ)的吸附

以铅离子为模板离子、乙二醇二甲基丙烯酸酯和偶氮二异丁腈为交联剂和引发剂、稀盐酸为洗脱剂,采用微波辅助反相乳液悬浮聚合法,制备了磁性离子印迹聚合物(MIIP),通过SEM、FTIR、XRD和BET技术对其进行了表征,并将其用于水中Pb(Ⅱ)的吸附.在初始质量浓度60 mg/L、溶液pH 6、吸附温度303 K、吸附时间6...     

湿热、亚湿热地区气候环境条件对高分子材料的影响

通过高分子材料在广州、海南地区三年大气自然环境曝露试验与人工加速试验对比，探索该类地区气候环境条件对高分子材料老化的规律性的影响。     

高分子材料光老化试验与标准发展现状

耐光老化性能是高分子材料的主要工程化应用性能之一,其优劣影响着产品的可靠性及使用寿命。本文介绍了太阳光对高分子材料的影响效应及作用机理,并归纳了现阶段国内外常用的光老化试验方法及参照标准,最后指出其发展方向。     

两性高分子螯合絮凝剂和氯化钙对羟基亚乙基二膦酸预镀铜废水的去除性能

以羟基亚乙基二膦酸(HEDP)预镀铜废水为处理对象,考察两性高分子螯合絮凝剂(ACPF)和CaCl2对其处理效果.结果表明,单独使用ACPF或CaCl2,用量大,残余Cu2+和COD浓度均不能达到电镀污染物排放标准(GB21900—2008);将ACPF和CaCl2配合使用,Ca2+可与HEDP螯合生成HEDP—Ca沉淀,促进ACPF与Cu2+螯合;且Ca2+还可与废水中的酒石酸根离子形成溶解度很小的结晶,促进絮体的形成和沉降.因此,处理药剂的用量明显降低,Cu2+和COD残余浓度均能达标.适宜的处理条件为:弱碱或碱性条件下,ACPF投加量为3.0 g.L-1,CaCl2投加量为2.0 g.L-1,Cu2+和COD的去除率分别达99.74%和97.5%,残余浓度分别为0.335和25.27 mg.L-1.     

防毒面具罩体材料研究进展

本文简要介绍了国内外先进面具罩体材料的使用情况及罩体材料选择因素,指出了我国面具罩体材料存在的主要问题,分析了常用罩体材料的力学性能和防护能力,并重点介绍了广泛应用的丁基橡胶以及其共混材料。此外,还对罩体材料的发展进行了简要总结。     

不同氧化法对模拟聚合物驱废水降黏效果的影响

分别采用UV-Fenton试剂氧化法、次氯酸钙氧化法和二氧化氯氧化法处理模拟聚合物驱废水,考察了各工艺条件对废水降黏效果的影响。实验结果表明:在初始废水pH为7、反应温度为50℃、反应时间为20 min的条件下,UV-Fenton试剂氧化法适宜的H2O2加入量为1 mmol/L,n(H2O2)∶n(Fe2+)=10,处理后废水降黏率达65.7%;次氯酸钙氧化法适宜的次氯酸钙加入量为500 mg/L,处理后废水降黏率达81.7%;二氧化氯氧化法适宜的二氧化氯加入量为100 mg/L,处理后废水降黏率为40.9%。3种氧化法对模拟聚合物驱废水的降黏率大小顺序为:次氯酸钙氧化法>UV-Fenton试剂氧化法>二氧化氯氧化法。