贵州石漠化空间分布与喀斯特地貌、岩性、降水和人口密度的关系

本次研究从地貌发育的角度揭示了贵州省石漠化景观及其等级的空间分布与下垫面的物质组成和气候(降雨量)的空间变化存在着密切的联系,而与现今人类活动强度(人口密度)的空间分布不存在关联性。具体体现为:(1)贵州溶蚀为主地貌类型区和纯碳酸盐岩分布区基本一致,区内的峰丛(林)地貌主要分布于年降水量≥1200mm的威宁-毕节-贵阳-凯里一线以南的溶蚀为主地貌类型区,随着降水量由北向南逐渐增加,塔状峰丘增多;溶丘,峰丛(林)不发育地貌主要分布于年降水量≤1100mm的威宁-毕节以北的黔西北溶蚀为主地貌类型区和毕节-贵阳-凯里一线以北的溶蚀侵蚀地貌类型区,(2)贵州石漠化程度与喀斯特地貌类型空间分布的耦合关系较好,与人口密度空间分布的耦合关系不好。峰丛(林)地貌发育的威宁-毕节-贵阳-凯里一线以南的溶蚀为主地貌区,黔中地区人口密度为300～400/km2,该区一些县的石漠化,远不如黔西南地区人口密度为200～300/km2或黔南地区人口密度为100～200/km2的严重。历史时期森林植被的全面破坏是贵州喀斯特地区石漠化的主要驱动力,除荔波茂兰喀斯特森林保护区等少数地区,贵州喀斯特地区的原始森林无论是现在人口密度高的地区,还是低的地区,历史时期均已遭受全面的破坏。喀斯特坡地次生植被的恢复状况在很大程度上取决于坡地的岩土组成,现代石漠化严重程度的区域差异,主要受下垫面地面物质组成的控制,也就是"石山"的多寡。     

石化企业玻璃钢设施静电特性及安全使用

通过测试玻璃钢设施的静电参数,研究分析玻璃钢设施的静电特性,表明玻璃钢设施有较大的静电危险性,提出了一般防静电措施,预防玻璃钢设施的燃爆风险。     

机械式模拟运输台仿真研究

模拟运输振动试验台作为一种机械式随机振动模拟器,能够较好地再现汽车运输振动环境。针对模拟运输台在调试、使用时具有一定盲目性的问题,进行了运动学仿真。仿真结果与实测数据吻合良好,验证了模型建立的正确性,调整模拟运输台上可变参数进行一系列的仿真,总结这些参数对于最终结果影响的规律。仿真结果表明,模拟运输台的台面振动由系统自激振动和凸轮带动台面强迫振动复合而成;台面上功率谱密度的第一主峰主要和系统的自激振动有关,第二主峰主要和凸轮带动台面的强迫振动有关。     

干热河谷林地燥红土固碳特征及"新固定"碳表观稳定性

全球气候变化背景下,森林土壤固碳能力及所固定碳的稳定性受到极大关注.基于土壤密度分组和酸水解技术,对比研究了1991年营造的大叶相思(Acacia auriculiformis)林不同阶段(1991、1997、2003和2010年)土壤及其物理和生化组分中有机碳密度.结果表明,造林19 a后林地表层(0～15 cm)和亚表层(15～30 cm)土壤有机碳密度分别为1.40 kg.m-2和0.99kg.m-2.研究期内(1991～2010年)表层和亚表层土壤平均固碳速率分别为37.89 g.(m2.a)-1和16.84 g.(m2.a)-1,且土壤呈现加速固碳特征.2003年林地表层重组有机碳分配比例为71.44%,显著高于2010年(67.99%).2003年林地表层或亚表层轻组顽固性碳指数显著高于重组,但均随林龄的增加而降低,尤其是轻组顽固性碳指数.2003～2010年间燥红土"新固定"碳中57%～70%受物理保护,33%～49%为生化稳定性碳.研究揭示出干热河谷人工林燥红土具备较大的固碳能力.受物理保护碳的生化稳定性低于非保护碳,其稳定性均随林龄的增加而降低.     

高锰酸盐指数测定中影响因素的探讨

通过对酸性法测定高锰酸盐指数全过程的分析,结果表明水样静置时间、水样浓度、水浴时间、反应温度等因素影响测定结果。文章总结了测定过程中需要注意的几个关键环节,确保获得准确数据。     

非职业性一氧化碳中毒事件成因分析

通过对燃煤量的调查结果和呼和浩特CO浓度值监测结果分析了CO排放源的分布特征和CO浓度的变化特征,得出高燃煤地区和采暖期CO浓度值较高但低于标准值。对CO中毒事件案例与气象条件关系进行了分析得出逆温、高湿、小风和低气压时不利于一氧化碳浓度扩散,容易引起一氧化碳中毒事件的发生。     

基于GIS的海洋底栖生物栖息密度空间插值方法

在地理信息系统即GIS的支持下,分别采用反距离加权(inverse distance weighted,IDW)、普通克里格(ordinary krig-ing,OK)、规则样条(regularize spline,RS)和张力样条(tension spline,TS)4种插值方法对2006年7月获得的大连湾底栖生物栖息密度的数据进行空间插值处理,并对插值结果的精确度进行交叉验证,分析和比较不同插值方法获得的分布图。结果表明,插值精确度普通克里格>反距离加权>张力样条>规则样条;4种方法均能较客观的模拟出底栖生物栖息密度的分布趋势,但是在整体趋势和局部趋势两方面的综合考虑下,普通克里格的表现效果更好。文章进一步指出,在确定站位数量及分布前提下,插值结果的精确度可以通过选择空间插值方法得以改善,但其根本还是取决于站位布置的数量和其分布合理性。     

The predictive validity of safety climate

PROBLEM: Safety professionals have increasingly turned their attention to social science for insight into the causation of industrial accidents. One social construct, safety climate, has been examined by several researchers [Cooper, M. D., & Phillips, R. A. (2004). Exploratory analysis of the safety climate and safety behavior relationship. Journal of Safety Research, 35(5), 497-512; Gillen, M., Baltz, D., Gassel, M., Kirsch, L., & Vacarro, D. (2002). Perceived safety climate, job Demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research, 33(1), 33-51; Neal, A., & Griffin, M. A. (2002). Safety climate and safety behaviour. Australian Journal of Management, 27, 66-76; Zohar, D. (2000). A group-level model of safety climate: Testing the effect of group climate on microaccidents in manufacturing jobs. Journal of Applied Psychology, 85(4), 587-596; Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628] who have documented its importance as a factor explaining the variation of safety-related outcomes (e.g., behavior, accidents). Researchers have developed instruments for measuring safety climate and have established some degree of psychometric reliability and validity. The problem, however, is that predictive validity has not been firmly established, which reduces the credibility of safety climate as a meaningful social construct. The research described in this article addresses this problem and provides additional support for safety climate as a viable construct and as a predictive indicator of safety-related outcomes. METHODS: This study used 292 employees at three locations of a heavy manufacturing organization to complete the 16 item Zohar Safety Climate Questionnaire (ZSCQ) [Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628]. In addition, safety behavior and accident experience data were collected for 5 months following the survey and were statistically analyzed (structural equation modeling, confirmatory factor analysis, exploratory factor analysis, etc.) to identify correlations, associations, internal consistency, and factorial structures. RESULTS: Results revealed that the ZSCQ: (a) was psychometrically reliable and valid, (b) served as an effective predictor of safety-related outcomes (behavior and accident experience), and (c) could be trimmed to an 11 item survey with little loss of explanatory power. IMPACT ON INDUSTRY: Practitioners and researchers can use the ZSCQ with reasonable certainty of the questionnaire's reliability and validity. This provides a solid foundation for the development of meaningful organizational interventions and/or continued research into social factors affecting industrial accident experience.     

Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

基于BP神经网络的煤层自燃预测

在全面分析影响煤层自燃因素的基础上,建立了煤层自燃预测的人工神经网络模型.应用该模型对某煤田的多个煤层样本进行了训练和预测,网络经过10次训练后,误差达到设定的最小值,6次预测测试中最大误差仅为0.027 8,最小的为0.000 1.研究表明,该模型精度较高,可用于预测煤层自燃的实际应用.