对氯气校正法测定高氯废水化学需氧量的方法研究

氯气校正法(HJ/T70-2001)是测定高氯废水化学需氧量的国标方法,为了减少样品测定过程带来的环境污染,研究在不改变HJ/T70-2001氧化体系及测试条件的情况下,将取样体积由20 mL减半为10 mL,试剂的使用量相应减半,对方法的检出限、相对误差、相对标准偏差等指标进行验证。结果表明,该方法的检出限符合要求,准确度较高,精密度较好,可用于高氯废水化学需氧量的测定。     

环境中的微塑料:赋存、检测及其危害

近年来,由个人护理品及废旧塑料直接或间接产生的微塑料不断地在各种环境介质中被检出,且微塑料会对生态系统产生各种危害,因此对微塑料的研究受到越来越广泛的关注。阐述了微塑料在水体、沉积物、沙滩和生物体中的赋存情况,介绍了微塑料的采集与分离方法,以及定性与定量分析方法。指出微塑料对环境及生物体产生的危害,提出现阶段研究存在的主要问题,并对今后的研究方向进行了展望。     

基于改进的SPAR-H化工实验室人因可靠性分析

近年来化工实验室事故屡禁不止,其中人的不安全行为是导致事故发生的主要原因.为评估实验人员可靠性,进一步管控化工实验室人的不安全行为,基于标准化工厂人因可靠性分析(SPAR-H)方法,结合化工实验室人因失误的特点,确定了更加适用于化工实验室的人因可靠性分析方法.首先依据"S-O-P"认知模型对人因失误类型进行划分;然后基...     

An Experimental Methodology for Monitoring Contaminant Transport Through Geotechnical Centrifuge Models

In this paper, an attempt has been made to highlight an experimental methodology for monitoring contaminant transport through locally available silty soil and commercially available clay in geotechnical centrifuge models, for different compaction states. Use of multiple depth sensors to determine depth distribution of sodium chloride in the soil column has been detailed. The obtained results have been compared with argentometric method. To validate the centrifuge modelling, modelling of models has been used. The test setup developed can simulate contaminant transport mechanisms through the soil mass, which is approximately 10 m deep, over a period of 600 days. R _e and P _e are found to be N times higher in the centrifuge models. These numbers are found to be several orders less than unity. This indicates that laminar flow prevails and the dominating Cl⁻ transport mechanism in centrifuge is diffusion. The study also highlights the fact that the geotechnical centrifuge modelling can be used as a viable alternative to field scale experimentation.     

Formulaic Expert Method to Integrate Evaluation and Valuation of Heritage Trees in Compact City

Urban trees serve important environmental, social and economic functions, but similar to other natural endowments they are not customarily depicted in monetary terms. The needs to augment protection, funding and community support for urban greening call for proper valuation. Heritage trees (HTs), the cream of urban-tree stock, deserve special attention. Existing assessment methods do not give justice to outstanding trees in compact cities deficient in high-caliber greenery, and to their social-cultural-historical importance. They artificially separate evaluation from valuation, which should be a natural progression from the former. Review of tree valuation methods suggested the formula approach to be more suitable than contingent valuation and hedonic pricing, and provided hints on their strengths and weaknesses. This study develops an alternative formulaic expert method (FEM) that integrates evaluation and valuation, maximizes objectivity, broadly encompasses the key tree, tree-environment and tree-human traits, and accords realistic monetary value to HTs. Six primary criteria (dimension, species, tree, condition, location, and outstanding consideration) branched into 45 secondary criteria, each allocated numerical marks. Each primary criterion was standardized to carry equal weight, and a tree's maximum aggregate score is capped at 100. A Monetary Assignment Factor (MAF) to consign dollar value to each score unit was derived from three-year average per m² sale price of medium-sized residential flats. The applicability of FEM was tested on selected HTs in compact Hong Kong. The aggregate score of a tree multiplied by MAF yielded monetary value, which was on average 66 times higher than the result from the commonly-adopted Council of Tree and Landscape Appraisers method. The computed tree values could be publicized together with multiple tree benefits to raise understanding and awareness and rally support to protect HTs. The property-linked FEM could be flexibly applied to other cities, especially to assess HTs in compact developing cities.     

碘量法测定水中溶解氧有关问题的探讨及改进

碘量法测定溶解氧时,采用NH3·H2O—KI代替NaOH(KOH)—KI固定溶解氧,用H2SO4—H3PO(41+1)混合酸代替H2SO4溶解沉淀,使沉淀沉降速度加快,分界线明显,沉淀溶解也更完全。同时做样品空白实验,校正了氧化还原性物质产生的干扰,对废水有明显的抗干扰能力。通过对蒸馏水、自来水、池塘水、废水进行溶解氧测定,结果均非常满意。     

生物表面活性剂产生菌犁头霉菌(Absidia orchidis)的筛选及发酵条件优化

采用植物油为唯一碳源,设计选择培养基,从饭店下水道污泥中筛选出生物表面活性剂产生菌.结果分离到12株菌,其中一株能使发酵液的表面张力值从68 mN·m-1降低到34.5 mN·m-1,具有开发潜力,被选出作进一步的研究.该菌株经鉴定为犁头霉菌(Absidia orchidis).通过正交试验对犁头霉菌的培养条件进行优化,其优化培养条件为:植物油3.6 g·L-1,KH2PO412.1 g·L-1,Na2HPO45 g·L-1,(NH4)2SO4 1 g·L-1,NaNO32 g·L-1,酵母浸膏0.1 g·L-1,MgSO4·7H2O 0.15 g·L-1,NaCl 5 g·L-1,CaCl2 0.1 g·L-1,EDTA 1 g·L-1,KI 0.83μg·L-1,H3PO4 0.01μg·L-1,CoCl2·6H2O 0.048μg·L-1,MnSO4·H2O 0.312μg·L-1,Na2 MoO4·2H2O 0.048μg·L-1,ZnCl2 0.287μg·L-1,CuSO4·5H2O 0.125μg·L-1,初始pH值8,接种量6%.发酵70h时可获得生物表面活性剂的最大收获量,此时发酵液中生物表面活性剂的相对浓度达402倍.     

Fe3+掺杂TiO2薄膜的制备及光催化降解甲醛的研究

采用溶胶-凝胶法制备Fe3+掺杂的TiO2薄膜光催化剂,进行甲醛的光催化实验,考察Fe3+掺杂量、薄膜焙烧温度及溶胶体系pH值对光催化性能的影响。结果表明,Fe3+掺杂量为1.0%,焙烧温度500℃1h,加硝酸溶胶体系pH=4时,Fe3+掺杂TiO2薄膜光催化活性最高。     

SBR法处理豆制品废水工艺条件的研究

用SBR法处理豆制品废水的试验表明,该系统具有较好的抗负荷冲击能力,进水COD在300～2000 mg/L之间变化,对系统不造成任何影响;考察了曝气时间、曝气量和污泥浓度等对去除效果的影响,试验结果表明,曝气时间和曝气量对处理效果影响很大,确定该反应系统最佳曝气时间是8 h,适宜的曝气量是800 L/h,而污泥浓度控制在4000 mg/L左右时,处理效率最高,采用进水顶出水的排水方式是可行的,确定系统的最佳排水比是3/5.厌氧段的插入可以减少剩余污泥的产量.     

高浊度污水快速净化新技术

介绍了一种快速净化高浊度污水的新技术,该技术根据化学强化一级处理(chemically enhanced primary treatment,CEPT)技术、闪速混合(flash mixing)技术、旋流和点涡流絮凝技术、悬浮泥层过滤技术和过滤水力学原理等理论,采用物理化学法去除污水中的有机污染物和其他有害杂质,其有着流程简单可靠、投资和运行费用低、占地少、净化效果好的优势.