广义物质循环模型及对循环经济的政策内涵

在传统经济增长模式下。我国资源开采、生产、消费及消费末端各个环节的环境问题都十分突出。然而传统的物质循环并不能从根本上解决我国经济增长与生态环境之间的矛盾。在总结传统物质循环的特点与局限性的基础之上。提出了旨在提高经济系统全过程资源效率与环境绩效的广义物质循环的概念及理论模型；剖析了广义物质循环的资源与环境政策内涵，并据此提出我国资源环境的生命周期政策途径；最后以广义物质循环的内涵及基本原则为指导。深入探讨了我国循环经济发展的资源政策与环境政策。本文认为。建立与发展以广义物质循环为核心的循环经济增长模式。是我国实现经济与环境持续协调发展的根本途径。     

Evaluation of life cycle inventory data for recycling systems

This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO₂-equivalent emissions were compared to illustrate variations in the data. It was hypothesised that emissions from material production and the recycling industry had decreased over time due to increasing regulation, energy costs and process optimisation, but the reported datasets did not reveal such a general trend. Data representing the same processes varied considerably between databases, and proper background information was hard to obtain, which in turn made it difficult to explain the large differences observed. Those differences between the highest and lowest estimated CO₂ emissions (equivalents) from the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows that the choice of dataset used to represent the environmental load of a material recycling process and credited emissions from the avoided production of virgin materials is crucial for the outcome of an LCA on waste management. Great care and a high degree of transparency are mandatory, but advice on which datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO₂ per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases.     

建筑废弃物再生利用的可行性技术研究综述

建材行业的发展为城市化建设提供了重要保障,在我国城市化快速发展、建筑材料需求旺盛的带动下,建材行业发展强劲,但大多属于高能耗高污染行业,加之城市拆迁改造产生大量建筑废弃物,环境压力十分巨大,必须加强建筑废弃物的环境管理。对建筑废弃物再利用、再循环以及减少建筑废弃物是解决建筑行业环境问题的重要方式,实施这些仍有很大的提升空间。本文回顾了近年来建筑废弃物再生利用方面的各种可行性技术。主要是针对沥青、砖、混凝土、金属、玻璃等几种物质再生利用的可行性技术进行综述,为未来建筑废弃物再生利用领域提供参考。     

Assessing the potential of crop residue recycling in China and technology options based on a bottom-up model

Crop residues are an important biomass, and are significant in the sustainable development of China. This paper uses the Grey-Markov modeling approach, the cost-benefit analysis method, and the constraint optimiza- tion method to establish the potential of crop residue recycling in China （CRRC） using a bottom-up analysis. Taking 2010 as the baseline year, the CRRC model is used to determine the quantity trends of crop residue resources, simulating the recycling potential and selecting key crop residue recycling technologies for operation between 2010 and 2030. The results illustrate that the total residue output from different crops will gradually increase to 1062 million tons in 2030. The proportion of crop residue for field burning is expected to decrease as a result of guidance and support from the government. Market mechanisms are also improving the development of the crop residue recycling industry. The economic benefit of crop residue recycling is expected to be worth 132 billion CNY in 2030 according to technology structure options. Key crop residue recycling technologies preferred such as liquefaction, amination, silo, co-firing straw power and composting will account for more than 85% of the total benefits.     

Spent rechargeable lithium batteries in e-waste: composition and its implications

The amount of spent rechargeable lithium batteries （RLBs） is growing rapidly owing to wide application of these batteries in portable electronic devices and electric vehicles, which obliges that spent RLBs should be handled properly. Identification of spent RLBs can supply fundamental information for spent RLBs recycling. This study aimed to determine the differences of physical components and chemical compositions among various spent RLBs. All the samplings of RLBs were rigorously dismantled and measured by an inductive coupled plasma atomic emission spectrometer. The results indicate that the average of total weight of the separator, the anode and the cathode accounted for over 60% of all the RLBs. The weight ratio of valuable metals ranged from 26% to 76%, and approximately 20% of total weight was Cu and Al. Moreover, no significant differences were found among different manufacturers, applications, and electrolyte types. And regarding portable electronic devices, there is also no significant difference in the Co-Li concentration ratios in the leaching liquid of RLBs.     

Benzene removal by nano magnetic particles under continuous condition from aqueous solutions

Benzene removal evaluated using Fe304 nano continuous condition. A 44 initial benzene concentration, from aqueous solutions was magnetic particles （NM） in factorial design including NM dose, contact time and pH was investigated in 16 experiments （Taguchi OA design）. The results indicated that all factors were significant and the optimum condition was： pH 8, NM dose of 2000 mg.L-1, benzene concentrations of 100 mg.L-1 and contact time of 14min. The maximum benzene uptake and distribution ratio in the optimum situation were 49.4mg.g-1 and 38.4L.g-1, respectively. The nano particles were shown to capture 98.7% of the benzene in optimum batch condition and 94.5% in continuous condition. The isotherm data proved that the Bmnauer-Emmett-Teller model fit more closely and produced an isotherm constant （b） less than one, indicating favorable adsorption. Regeneration studies verified that the benzene adsorbed by the NM could be easily desorbed by temperature, and thereby, NM can be employed repeatedly in water and wastewater management.     

典型废旧塑料处置地土壤中多溴联苯醚污染特征

选择我国北方典型废旧塑料处置地为研究区域,对土壤中21种PBDEs(多溴联苯醚)的含量、同系物组成和分布特征进行了研究. 结果表明,该区域土壤中w(∑PBDEs)为1.25~3673.41ng/g,平均值为749.29ng/g,其中w(BDE209)占w(∑PBDEs)的92%以上. 整体上,处置作坊内土壤中w(∑PBDEs)明显高于作坊间道路土壤和处置地周边土壤. 塑料中添加的十溴联苯醚工业品是该区域土壤中PBDEs的主要来源. 该区域土壤PBDEs污染水平与我国电子废物集中处置场地相当,高出我国一般城市及工业城市土壤1~3个数量级,是我国另一类PBDEs高污染区,其环境风险性应引起足够的重视.      

废弃液晶显示屏中液晶的回收与性能检测

为回收废弃LCD(液晶显示器)显示屏中的液晶,提出了“超声波辅助有机溶剂溶解液晶屏、膜过滤和减压蒸馏”的回收方法,并以TN-TFT显示模式的液晶屏为试验对象,对回收液晶的光电性能进行检测和相变分析,以评估其潜在的利用价值. 结果表明:方法的回收率达50%;收集物液晶特性明显,呈现出较宽的向列相温变区间和较高的清亮点温度,但纯度不高,达不到日常显示所用的液晶纯度要求(GCMS>99%);响应时间为33.2ms,可以满足日常LCD显示屏的要求;介电常数为4.71,折射率为0.089,虽与纯净液晶相比稍有下降,但可满足标准AM-LCD显示的参数要求;阈值电压为3.2V,比纯净液晶有所提高,可进一步去除离子性杂质进行提纯,以降低阈值电压.      

Will unit‐pricing enhance recycling?

Unit pricing is a program in solid waste management that integrates market instruments to encourage households to reduce waste generation and increase recycling. Many studies have shown that unit pricing is effective, especially when the evaluation is based on comparing outcomes before and after implementation. In this paper, we use the so-called difference-in-differences approach to evaluate unit pricing. This approach can provide a less-biased estimation, and can help to examine whether a unit pricing program generates less waste and higher recycling or results in illegal dumping in neighboring regions. Using the fee-per-bag program implemented in Taipei City, Taiwan, as a case study, we found that unit pricing does reduce the amount of garbage but its impact on recycling is not as significant as the current literature suggests. Moreover, the program causes a serious negative externality: more than 60%?of the garbage reduction in the city is due to increased dumping of waste in neighboring regions. As the impact of unit‐pricing on recycling is limited, policy-makers cannot rely solely on this program to enhance recycling in the management of municipal solid waste.     

Sustainable design of sanitation system based on material and value flow analysis for urban slum in Indonesia

Material flow analysis (MFA) and value flow analysis (VFA) were applied to the sanitation system in an urban slum in Indonesia. Based on the results of the MFA and VFA, garbage and excreta disposal costs were evaluated to be 0.7% and 1.1%, respectively, of per capita income. Such value flows seem reasonable in light of the recognized affordability to pay (ATP) standard. However, current excreta disposal methods create negative impacts on downstream populations. Because such disadvantages do not go back to disposers, but passed to downstream, the current value flow structure does not motivate individual toilet users to install treatment facility. Based on current material and value flow structures, a resource recycling sanitation system scenario was examined. Based on VFA, an affordable initial cost for such a system was calculated; this was found to be comparable in price to a cheaper composting toilet that is currently available in the market.