Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.     

Mitigation performance of the process protection system on the accident consequences of H2S-containing natural gas release and explosion

Toxic loads and explosion overpressure loads pose grave threats to the offshore oil and gas industry. Many safety measures are adopted to prevent and mitigate the adverse impacts caused by toxic loads and explosion overpressure loads. As a general safety barrier, the process protection system has been widely used but rarely evaluated. In order to assess the barrier ability, the mitigation performance of the process protection system is concerned in this study. Firstly, several chain accidents of H₂S-containing natural gas leakage and explosion are simulated by varying the response time of the process protection system with CFD code FLACS. Qualitative assessment is conducted based on the variation of the dangerous load profiles. Furthermore, the quantitative assessment of the mitigation performance is accomplished by considering its ability in reducing the probability of fatality. Emergency evacuation and no emergency evacuation are considered respectively in the quantitative assessment. The results prove that the process protection system takes effect on mitigating the toxic impact and explosion overpressure impact. The results also demonstrate that although the emergency evacuation may result in a severer explosion load to the operator, the process protection system can mitigate the adverse impacts regardless of whether the emergency evacuation is conducted or not.     

Risk assessment of sour gas inter-phase onshore pipeline using ANN and fuzzy inference system – Case study: The south pars gas field

Nowadays, pipelines have been extensively used for transporting oil and gas for long distances. Therefore, their risk assessment could help to identify the associated hazards and take necessary actions to eliminate or reduce the risk. In the present research, an artificial neural network (ANN) and a fuzzy inference system (FIS) were used to prepare a new model for pipeline risk assessment with higher accuracy. To reach this objective, the Muhlbauer method, as a common method for oil and gas pipeline risk assessment, was used for determining important and influential factors in the pipeline performance. Mamdani fuzzy model was developed in Matlab software by considering expert knowledge. The outcomes of this model were used to develop an ANN. To verify the developed model, the inter-phase shore pipe of phase 9–10 refinery in the South Pars Gas field was considered as a case study. The results showed that the proposed model gives a higher level of accuracy, precision, and reliability in terms of pipe risk assessment.     

“三线一单”促进四川省高质量发展

过去40年来我国经济建设取得了举世瞩目的成绩,但是也留下了很多生态环境问题。目前我国经济已经由高速增长阶段转向高质量发展阶段,但高质量发展缺乏指标体系和具体路径。“三线一单”是一套生态环境分区管控体系,其主要目的是统筹地方社会经济与环境保护的矛盾,促进经济结构转型。四川省在“三线一单”编制过程中,通过建立指标体系从生态环境保护的角度为地区高质量发展提供了量化标准,通过差异化管控要求为地区高质量发展提供了具体路径,从生态环境角度助力高质量发展。     

绿色生态城区规划及实践的比较研究

目前,是以提倡低碳环保、绿色生态城市为发展规划的社会,生态化建设正如火如荼地进行中。本文以中新天津生态城、曹妃甸唐山湾生态城、青岛中德生态园这三个地点作比较,以建设绿色生态城市规划协同、共生城市理念、混合开发和生态社区结构这几点进行了分析,总结了城区建设间的问题,并针对这些问题研究解决方案,以达到绿色生态区建设的目的。     

“互联网+”智慧环保生态环境多元感知体系发展分析

在大数据技术以及信息化快速稳定持续发展的实践背景之下,"互联网+"智慧环保发展时代的悄然来临,使得对"互联网+"智慧环保多元感知体系的研究与发展工作,逐步被提升到了极其重要的地位。文章结合雄安新区生态环境智慧监测体系建设项目,展开了简要的阐释分析。     

采用电芬顿-磁固定化菌株耦合体系治理苯酚废水的研究

为实现对苯酚废水治理工艺的优化,针对传统包埋法制备固定化细胞的工艺方法进行改进,选用磁性纳米颗粒制备磁固定化细胞,将其与电芬顿法结合构建耦合体系,利用耦合协同作用实现催化剂的重复利用,并依托微生物的良好降解性能与稳定性提高苯酚降解率,进一步实现对苯酚废水治理工艺的系统优化。     

基于大数据技术构建生态环境信息化体系及其重点应用研究

本文首先分析了生态环境信息化体系的主要构成要素,其后基于大数据技术的生态环境信息化体系重点领域应用进行了深入研究。     

厦门市家具类大件垃圾处理的经验及启示

调研厦门市家具类大件垃圾处理现状,总结厦门市处理家具类大件垃圾的主要经验。根据厦门市家具类大件垃圾处理的实践,提出适合我国国情的家具类大件垃圾处理框架体系,以期为国内其他城市开展家具类大件垃圾处理工作提供借鉴。家具类大件垃圾处理应遵循3个原则,即前端坚持可持续发展的原则,中端坚持循环利用的原则,终端坚持零遗弃的原则。     

生态文明治理体系和治理能力现代化的几个核心问题研究

生态文明治理现代化是国家治理现代化的重要组成部分,本文从国家治理现代化出发,分析了我国生态文明治理体系和治理能力现代化的概念与内涵,针对当前生态文明治理体系和治理能力存在的五个方面问题,提出了生态文明治理体系现代化需要坚持完善的生态环境保护、资源高效利用、生态保护修复、生态环保责任等四个重点方向,提出了生态文明治理能力现代化需要改革创新的领导能力、决策能力、法治能力、科学精准治理能力、基础保障能力、市场化治理能力、公众参与能力等七大关键领域,这是加快推进生态文明治理体系和治理能力现代化的迫切需求。