珠江三角洲区域污染分布及其垂直风场特征

基于2014年4月~2015年3月珠江三角洲(珠三角)56个环境监测子站以及9个城市的逐时PM2.5浓度数据,对珠三角地区的颗粒物污染进行了系统聚类分析和相关性分析.结果表明,珠三角地区PM2.5的区域污染可分为3种类区,一为东莞、广州、佛山以及江门(Ⅰ型);二为中山、珠海、深圳、惠州(Ⅱ型);三为肇庆单独为一类(Ⅲ型).其在一年中所出现的天数分别为47、7和128 d.Ⅰ型污染时,除珠海、深圳和惠州外,其他城市的PM2.5浓度普遍较高;Ⅱ型污染时,整个珠三角地区的PM2.5浓度均要高于50.0μg·m-3;Ⅲ型污染时,PM2.5浓度较高的区域主要集中在肇庆、广州以及佛山地区.同时利用珠三角地区4台主要的风廓线雷达数据研究3种污染类型所对应的垂直风场特征发现:Ⅰ型与Ⅲ型污染状况所对应的风廓线相似,低层受东南风控制,高层为西南风,Ⅲ型的风速大于Ⅰ型风速,而Ⅱ型污染时的风速明显大于其他两种类型,其低层几乎均受偏北风影响,而高层则受偏西风的影响.Ⅱ型污染所对应的边界层中低层的风向变化很小,而其他两类则有一定的变化.同时Ⅱ型的通风量要明显大于其他两种类型,其中Ⅰ型的通风量最小.珠三角受偏北风作用时,整个珠三角的PM2.5浓度较高;当盛行东南风时,Ⅰ、Ⅱ区的PM2.5浓度相对较低,而Ⅲ区的污染相对较重.     

苏州市主要工业污染物排放强度研究

污染物排放强度反映单位新创造经济价值的环境负荷大小.运用均方差赋权法对苏州市各地区的工业废水量、工业化学需氧量、工业氨氮、工业二氧化硫、工业氮氧化物、工业烟(粉)尘等6种主要污染物排放强度进行评价,结果表明,六种主要污染物排放强度综合评价的全市平均水平为15.08.然后分别计算各地区的污染物排放强度降低潜力,结果表明,主要污染物排放强度减排潜力存在区域间差异.最后提出促进污染物排放强度降低的一些建议.     

新疆生物质能资源的经济效益分析与评价

生物质能资源具有可再生和环境友好的双重属性,现已成为新疆能源发展的重要组成部分。对新疆生物质能资源进行总量估算,分析其地区分布特点,运用替代价值法分别计算秸秆、牲畜粪便及能源植物三大类生物质能资源的经济效益,并从结果中分析得出,新疆生物质能资源在区域分布上具有资源分布不均、＂西高东低＂以及效益高低与自然条件关联性大等特征。因此,新疆在发展生物质能源产业时应当因地制宜,才能最大限度将区域资源优势转化为经济优势。     

山东省珍稀濒危植物的区域分布及其保护

本文分析了山东省珍稀濒危植物的种类、区域分布及其产生的原因，提出了保护和合理开发利用的对策。     

MODELING GROUND WATER FLOW USING FLUX BOUNDARY CONDITIONS1

ABSTRACT: Determination of the boundary conditions for modeling ground water flow is a critical point especially in regional models. Normally the regional models require model areas that are greater than the given area of interest. This work focuses on the prediction of hydraulic heads in regional models using flux boundary conditions. The model uses flux boundary conditions that were estimated using a radial flow analog and Darcy's law. The regional model that is presented uses no parameter identification (inverse estimation) procedures. In the present work, the Houston area was used. The simulation of the hydrological conditions of the Chicot and Evangeline Aquifers that underlie the Houston area were made using the available information about the geological profile in the Houston region and the current information about the existing production wells. The regional model works as a forward problem. The system parameters such as hydraulic conductivity, specific storage, and hydrological stresses were specified, and the model predicts the hydraulic head. Actual data from piezometers operated by the U.S. Geological Survey (USGS) in many places throughout Houston were used as initial conditions. Some piezometric head data were generated using the regional variable theory called kriging to supply head estimates in areas where data were unavailable. The Modular Three Dimensional Finite Difference Groundwater Flow Model developed by the USGS was used to predict the hydraulic heads. The predicted ground water heads are compared to the actual data. The results show that the model performs well for locations where data were available.     

长江三角洲农业发展的地域差异研究

长江三角洲地处以上海为中心的经济发展区,是我国经济实力最强、产业规模最大的三角洲,具有良好的自然、社会、人文和区位条件,农业发展水平居全国前列。但是经济发展和高密度人口也给农业进一步发展带来沉重的压力,人地矛盾和人粮矛盾加剧严重危害了长江三角洲农业的可持续发展,同时全区农业发展水平受到自然、经济和历史因素的影响,存在较大的地域差异。从长江三角洲农业发展的地域差异出发,选取与农业发展密切相关的经济、     

试论江苏省国土资源与区域可持续发展

国土资源是区域可持续发展的基础,国土资源的合理开发利用是区域持发展的必由之路。首先详细地分析了江苏国土资源的优势条件,然后着重阐述了江苏国土资源的劣势,指出 一个资源约束型省份人地关系紧张、气候灾害频敏、环境问题突出已严重制约着区域的可持续发展;最后,根据江苏省情,对江苏可持续发展提出如下建议;加强对地理区位的开发和利用,促进力的合理布局,严格控制人口增长,努力提高人口素质,严格保护耕地,高效利用     

Environmental problem-solving and land-use management: A proposed structure for Australia

A three-tiered structure of land-use and environmental management is here proposed for Australia. The structure is based on the idea that environment means the environment of people, and that environmental problems arise when a change in the interaction between people and their environment leads to conflicts about the use of land and resources. The heterogeneity of society means that a range of human aspirations and value systems must be satisfied by environmental managers. Existing methods of environmental management fail to achieve these objectives, due to inadequate perception of environmental problems by decision-makers, and the inability of currently available impact assessment techniques to resolve human conflicts associated with the use of land and resources. The main work of planning and managing land use and the environment would be carried out by regional authorities, supported by federal and state policy. Examples are given of moves towards regional administration in England and Wales, Western Australia, Australia and New Zealand. Community participation in the decision-making process is essential and can be achieved by electoral representation to the authoritative bodies and through procedures that ensure informed public comment on planning proposals.     

OPTIMAL MANAGEMENT AND DESIGN OF HYDRAULIC SYSTEMS1

ABSTRACT: A possible methodology is developed to deal with the problem of designing complex pipeline systems, when they are subject to different rates of demand, and when a hypothesis of the flow distribution in different branches is not allowed. The mathematical algorithm used in linear programming. The problem, which is not linear, is dealt with by means of an iterative method; that is, by starting with a possible solution and inserting at each iteration the solution found in the preceding iteration. By taking as variables of the problem the piezometric heads of the ends for each branch of the network, the piezometric gradients and flows, and by thus considering the diameter as a derived variable, it is possible to isolate the nonlinearity in the cost function of the network. The latter is linearized each time close to the solution found in the preceding iteration.     

COST ANALYSIS OF WATER AND WASTE WATER TREATMENT PROCESSES IN DEVELOPING COUNTRIES1

ABSTRACT: Mathematical modeling techniques are used to develop predictive equations for cost of water and waste water treatment processes in developing countries utilizing socioeconomic, environmental, and technological indicators. Predictive equations are developed for each of the three regions (Africa, Asia, and Latin America) for construction, operation, and maintenance costs of slow sand filter, rapid sand filter, stabilization lagoon, aerated lagoon, activated sludge, and trickling filter. Data analysis indicated that cost of water treatment processes is a function of technological indicator (percentage of imported materials), population, and the design capacity. The variables which gave the best correlation for waste water treatment cost were population, design flow, and the percentage of imported waste water disposal materials.