不同高级氧化法对水中低浓度药物甲硝唑降解过程的比较

采用UV、H₂O₂、UV/H₂O₂、Fenton、UV/Fenton和UV/TiO₂方法,对水中低浓度的药物甲硝唑进行降解。通过HPLC和UV-Vis光谱得到的甲硝唑去除率。详细讨论了Fe²⁺、TiO₂和H₂O₂的初始浓度以及溶液的初始pH值对降解效率的影响。结果表明,UV/Fenton和UV/TiO₂ 2种系统对水中低浓度甲硝唑均有很好的去除效果,但前者的光催化效率更高。在甲硝唑浓度=6 μmol/L,H₂O₂和Fe²⁺的初始浓度分别为0.5 mg/L和2.94 μmol/L,pH=4的条件下,UV/Fenton方法对甲硝唑水溶液光催化的最佳效率为95.8%。     

基于生态安全的DAT-IAT城市污水处理工艺改进研究

通过正交试验,得到了DAT-IAT工艺和A/DAT-IAT工艺处理城市污水的常规指标去除和生态毒理指标削减的最优运行条件。结果表明,在正交试验的同一工艺中,COD去除最优运行条件的出水COD值优于生态毒性削减最优运行条件的出水COD值,但前者出水的生态毒性较大。由于厌氧池的水解酸化作用,A/DAT-IAT工艺对COD和生态毒性的处理效果均优于DAT-IAT工艺,并且回流总能耗低于DAT-IAT工艺,但是出水COD仍不达标。为了降低进入工艺的COD的总量,以絮凝沉淀做为预处理工艺,并采用Al残留量最小的絮凝剂投药量以降低出水中残留Al带来的生态风险。结果表明,在COD去除最优运行条件下,具有絮凝预处理的工艺对COD的去除效果优于没有絮凝预处理的工艺。絮凝-A/DAT-IAT工艺在COD去除最优运行条件下出水COD为104.46 mg/L,满足排放标准。在毒性削减最优运行条件下,具有絮凝预处理的工艺的出水生态毒性有所上升,但是污染物的总量得到了大幅削减。絮凝-A/DAT-IAT工艺与DAT-IAT工艺相比,在污染物去除效率得到大幅增加的同时,生态毒性得到有效控制,生态安全得到了有效的保障。     

含中间层的DSA电极电催化氧化硝基苯废水的研究

为了提高难降解有机废水的可生化性,以及更高效地去除废水中的特征污染物,同时避免二次污染,利用自制的含锡锑中间层的钌钯氧化物涂层电极对有机废水中的硝基苯进行处理,并利用SEM、XRD等方法对电极中间层、表层进行微观表征。微观测试表明,基体、中间层、表层之间结合力较强,有利于增强电极寿命;水处理实验表明,电催化氧化反应体系适合高浓度有机废水的处理,由于该反应体系需要外加电解质加强传质,这在实际运用中为废水中盐度的处理提供了一种新的途径,当电流密度为20 mA/cm²、电解质浓度为10 g/L、pH=5、极板间距=2 cm时,电催化氧化体系对硝基苯具有较高的去除效率。     

One laptop per child,local refurbishment or overseas donations? Sustainability assessment of computer supply scenarios for schools in Colombia

With the intention of bridging the ‘digital divide’ many programmes have been launched to provide computers for educational institutions, ranging from refurbishing second hand computers to delivering low cost new computers. The fast and economical provision of large quantities of equipment is one of the many challenges faced by such programmes. If an increase is to be achieved in the sustainability of computer supplies for schools, not only must equipment be provided, but also suitable training and maintenance delivered. Furthermore, appropriate recycling has to be ensured, so that end-of-life equipment can be dealt with properly. This study has evaluated the suitability of three computer supply scenarios to schools in Colombia: (i) ‘Colombian refurbishment’, -refurbishment of computers donated in Colombia, (ii) ‘Overseas refurbishment’, -import of computers which were donated and refurbished abroad, and (iii) ‘XO Laptop’, -purchase of low cost computers manufactured in Korea. The methods applied were: Material Flow Assessment, -to assess the quantities-, Life Cycle Assessment, -to assess the environmental impacts, and the application of the Multiple Attribute Utility Theory, -to analyse, evaluate and compare different scenarios. The most sustainable solution proved to be the local refurbishment of second hand computers of Colombian origin to an appropriate technical standard. The environmental impacts of such practices need to be evaluated carefully, as second hand appliances have to be maintained, require spare parts and sometimes use more energy than newer equipment. Providing schools with second hand computers from overseas and through programmes such as ‘One Laptop Per Child’ has the disadvantage that the potential for social improvements – such as creation of jobs and local industry involvement – is very low.     

浅议“环境试验设备技术条件”新标准

2006年至2008年,89版“环境试验设备技术条件”相继修订发布。本文着重阐述了“环境试验设备技术条件”新旧标准的变化及其与GB／T5170的关系。     

静电激发型袋除尘器的机理及应用前景

静电激发型袋除尘器有别于常规的电袋结合除尘器,其是将电除尘器的预荷电原理作用于烟气后,利用袋除尘器的滤袋做收尘极板来收集粉尘。本文通过分析Max-9^TMESFF的结构介绍了其除尘机理,并分析了它的应用前景。     

Experimental study of recycling lightweight concrete with aggregates containing expanded glass

The focus is on the issue of waste management when constructing and recycling lightweight concrete (LWC) with aggregates containing expanded glass. The paper analyses the recycling of concrete from lightweight aggregates, and on the important issue of environmental and waste management. The characteristics of recycling LWC such as density, compressive strength and thermal conductivity are investigated, and compared with normal existing concrete from lightweight aggregates. The results indicate that it is possible to recycle lightweight concrete construction waste. The described method shows great possibilities for increasing the use of construction waste materials from LWC containing expanded glass, in order to benefit from better use of the available capacity from existing construction waste. The characteristics of density, compressive strength and thermal conductivity from the new recycled material were compared with normal existing concrete from lightweight aggregates, such as changes in dependency on the type and parts of waste as well as its new binding components. Thus, a new recycled material has been created with new characteristics of density, compressive strength and thermal conductivity, which is conform to the compressive strength class and rules on heat protection and energy efficiency use in buildings (SI OJ RS No. 42/2002). Laboratory density, compressive strength, and thermal conductivity tests results showed that LWC can be produced by the use of waste LWC with aggregates containing expanded glass. However, the use of waste LWC with aggregates containing expanded glass seems to be necessary for the production of cheaper and environmentally friendly LWC.     

垃圾焚烧飞灰处理处置研究进展

针对作为危险废物的垃圾焚烧飞灰,介绍了近年来国内外对其进行处理处置的研究情况.飞灰的固化/稳定化处理主要从水泥(沥青)固化、熔融固化及化学药剂固化几方面进行论述,飞灰中重金属的提取主要从酸碱浸提、生物浸提、螯合剂浸提及电渗析法提取几方面进行论述.     

AHP-SWOT法在道路交通安全改善策略中的应用

针对交通事故的特点,探讨AHP-SWOT方法在道路交通事故评价中的具体应用。SWOT(优势—劣势,机会—威胁)分析法是一种综合考虑系统外部环境和内部条件的各种因素,对其进行系统评价并从中选择最佳策略的方法,但是它缺少定量分析的过程。AHP(层次分析法)具有定性分析和定量分析相结合的优势,采用SWOT和AHP相结合的方法进行评价更加合理和准确。将AHP-SWOT方法应用于道路交通安全评价系统,分析道路交通安全系统所面临的机会和威胁、所处的优势和劣势,可为正确评价道路安全水平、制定合理的道路交通安全改善策略提供理论指导。实例证明该方法可行有效。