核电厂换料水池底部密封结构密封元件的性能分析

目的研究某核电厂换料水池底部密封结构中密封元件的性能。方法利用有限元分析软件ANSYS,采用超弹单元建立换料水池底部密封结构密封元件的二维轴对称模型,并运用接触单元模拟密封接触界面进行计算分析。结果经计算得到换料水池底部密封结构密封元件的预紧力-变形量曲线。结论计算结果为分析换料水池底部密封结构密封试验的泄漏原因提供了理论依据,同时也为工程中密封元件预紧力的确定提供了较有价值的参考。     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

复合链式结构下中国林业碳库系统测度模型构建

温室气体上升导致的全球气候变暖问题不容忽视,增加森林碳汇和木质林产品碳储是缓解温室效应的有效途径。根据森林碳汇功能与林产品碳储功能的关联理论与模型,推导和改进包括森林子碳库、土壤子碳库及木质林产品子碳库在内的林业碳库核算模型及方法,以实现目标碳从森林碳库向木质林产品碳库的过渡与转移。基于气候变化背景下森林-林产品产业链的发展现状,构建包括森林子碳库和林产品子碳库的复合一体化林业碳库模型,使之为中国林业碳库的计量与评价提供判据。首先,对包含森林子碳库和木质林产品子碳库在内的世界林业碳库的发展现状进行探讨,归纳和比较国内外主流的关联林业碳库评估方法模型,从而对中国林业碳库模型的构建提供理论背景支持和逻辑方法支撑。其次,分析现有中国林业碳库评估存在的优势和弊端,找出适合中国林业特点的国家碳库创新评估路径,运用政府间气候变化专门委员会指定的生产法的思路,通过分析目标碳在林产品产业链生产、加工等过程中的流入和支出,提出创新中国林业碳库的模型构想并对其系统内涵进行分析。最后,赋予中国林业碳库系统模型数学表达,分析其数理结构并进行逻辑演绎,在森林子碳库和木质林产品子碳库两个复合链式体系下构建中国林业碳库系统测度模型(ForestProducts Carbon Model/FPCM)。     

钒对水稻种子萌发及幼苗生长的影响

通过室内培养的方法,研究了不同浓度钒处理对金优63、T优259两个不同品种水稻种子萌发、幼苗生长及部分生理生化指标的影响。结果表明:低浓度的钒处理能在一定程度上促进两种水稻种子的萌发及幼苗的生长,但随着钒污染浓度的增高,逐渐受到抑制,且根长受影响的程度大于芽长。从生长和生理生化各指标变化情况来看,不同浓度钒处理下,两种水稻幼苗根系脱氢酶活性与叶绿素含量均呈先升后降的变化趋势。T优259对钒污染的抗性大于金优63。     

黄钠铁矾渣制备透明氧化铁黄的研究

研究了以黄钠铁矾渣为原料,采用滴加法制备透明铁黄的工艺条件,讨论了亚铁浓度、温度、通气量、搅拌速度及添加剂用量等因素对铁黄制备的影响.用XRD和TEM对产品进行表征.结果表明,铁黄粒子呈针状;长轴为95～125 nm,短轴为18～25 nm;无团聚现象,单分散性好.     

Assessing microbial and chemical exposure risks of Giardia in indoor swimming pool water disinfected by chlorine

Swimming pools adopt chlorination to ensure microbial safety. Giardia has attracted attention in swimming pool water because of its occurrence, pathogenicity, and chlorine resistance. To control Giardia concentrations in pool water and reduce the microbial risk, higher chlorine doses are required during disinfection. Unfortunately, this process produces carcinogenic disinfection byproducts that increase the risk of chemical exposure. Therefore, quantitatively evaluating the comparative microbial...     

泄漏液池动态蒸发过程模型研究与分析

指出了现有液体蔓延和蒸发模型的不足,根据质量守恒定律,推导建立了动态液池蒸发模型.在详细分析液池蔓延和蒸发过程的基础上,结合苯的泄漏,利用新建立的数学模型对苯的蔓延和蒸发进行了模拟分析.     

用水解酸化池-膜生物反应器处理活性艳红X-3B废水

采用水解酸化池-膜生物反应器处理含活性艳红X-3B的模拟废水,研究了水力停留时间（HRT）对水解酸化池废水处理效果的影响,考察了水解酸化池-膜生物反应器对废水的处理效果及膜生物反应器中污泥沉降性能对膜污染的影响。实验结果表明：水解酸化池HRT为16h时,废水的可生化性最好,挥发性脂肪酸质量浓度与COD比值为0．5;HRT为17h时,废水脱色率达69％,而COD的去除率受HRT影响较小;膜生物反应器主要起去除废水中COD的作用;水解酸化池-膜生物反应器处理后废水的脱色率和COD去除率分别为83％和97％;膜生物反应器中活性污泥沉降性能的变化直接影响膜污染的速率。     

Transaction costs and community-based natural resource management in Nepal

Transaction costs in community-based resource management are incurred by households attempting to enforce property right rules over common resources similar to those inherent in private property rights. Despite their importance, transaction costs of community-based management of common pool resources (CPRs) are often not incorporated into the economic analysis of participatory resource management. This paper examines the transaction costs incurred by forest users in community forestry (CF) based on a survey of 309 households belonging to eight different forest user groups (FUGs) in the mid hills of Nepal. The analysis reveals that the average 'poor' household incurred Nepalese rupees (NRS) 1265 in transaction costs annually, while wealthier 'rich' households incurred an average of NRS 2312 per year. Although richer households bear higher proportions of such costs, transaction costs for CF management as a percentage of resource appropriation costs are higher for poorer households (26%) than those of middle-wealth (24%) or rich households (14%). There are also village differences in the level of transaction costs. The results show that transaction costs are a major component of resource management costs and vary according to socio-economic status of resource users and characteristics of the community.     

变压器油池火燃烧规律的实验研究*

为对变压器油池火灾进行准确有效的灭火,研究不同尺寸和不同厚度下变压器油的火灾动力学特征和基本燃烧特性,具体分析变压器油的燃烧过程和变压器油燃烧速率、火焰温度以及辐射热流随油池直径以及厚度的变化规律。结果表明:整个油品的燃烧过程分为预热燃烧阶段、稳定燃烧阶段和火焰熄灭阶段。对于厚度大于10 mm的油池燃烧,稳定阶段的燃烧速率与油层厚度无关,稳定阶段的燃烧速率随着油池直径的增加而增加。同时,变压器油火灾连续火焰区温度接近750 ℃。对于稳定燃烧阶段下的变压器油燃烧,基于辐射通量可得出在燃烧过程中,辐射热量占总燃烧热的占比约为1/3。研究结果可丰富变压器油燃烧的基础数据,为变压器火灾的灭火提供参考。